Torsion Ramp Springs and Hitch Pins

Stock# 7129081
PJ TRAILER black painted hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 1".

Stock# 7129083
PJ TRAILER black painted torsion ramp spring with 90 degree leg angle is designed for a shaft no larger in diameter then 1-3/4".

Stock# 7129089
PJ Trailer ramp assist spring is raw steel and measures 3-1/2' x 14" over-all.

Stock# 5445216
FLEET ENGINEERS Cam Lock Handle Keeper for Flush Mount 2" Roller Doors. Keeper Only.
SUPPLIES LIMITED

Stock# 5445125
The Maximum Strength Steel Lock ONLY is a heavy-duty cast grade 30 steel lock with pins that are mechanically fastened in place for optimum strength. No welds to fail or plating to burn off and rust.
SUPPLIES LIMITED

Stock# 5445126
The Maximum Strength Steel Lock ONLY is a heavy-duty cast grade 30 steel lock with pins that are mechanically fastened in place for optimum strength. No welds to fail or plating to burn off and rust.
SUPPLIES LIMITED

Stock# 5445134
The standard 99" x 5" x 5" brush head seal and retainer for recessed 1" roller doors is constructed of high quality aluminum and the Nylon brush seals out dust better than rubber or vinyl.
SUPPLIES LIMITED - 2 left in stock

Stock# 5445136
FLEET ENGINEERS W-Style Reefer side seal is co-extruded using PVC backing with flexible PVC front for the best seal against the door. Dimensions: 98.00" x 1.56" x.98".
SUPPLIES LIMITED

Stock# 7107108
Big Tex plain finish left hand torsion ramp spring with 90 degree leg angle is designed for a shaft no larger in diameter then 1-1/2".

Stock# 7107109
Big Tex plain finish right hand torsion ramp spring with 90 degree leg angle is designed for a shaft no larger in diameter then 1-1/2".

Stock# 7107110
BIG TEX plain finish right hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 1-1/2".

Stock# 7107111
BIG TEX plain finish left hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 1-1/2".

Stock# 7108638
Rockwell American plain finish left hand torsion ramp assist spring with 180 degree leg angle is designed for a shaft no larger in diameter then 1.5".

Stock# 7108637
ROCKWELL American plain finish right hand and left hand torsion ramp assist spring kit is designed for a shaft no larger in diameter then 1.75". Kit includes (1) right side spring and (1) left side spring.

Stock# 7107112
BIG TEX plain finish left hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 2".

Stock# 7107113
BIG TEX plain finish right hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 2".

Stock# 7122082
CAM Superline long leg black powder coated finish left hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 2".

Stock# 7122081
CAM SUPERLINE long leg black powder coated finish left hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 2".

Stock# 7107117
BIG TEX plain finish right hand torsion ramp spring with perpendicular legs is designed for a shaft no larger in diameter then 3/4".

Stock# 7107116
BIG TEX plain finish left hand torsion ramp spring with perpendicular legs is designed for a shaft no larger in diameter then 3/4".

Stock# 1577062
Stainless Steel right hand torsion ramp spring with a 4.3 in.-lbs rating per degree or 537 in-lbs. at 125°.

Stock# 1577005
Plain finish left hand torsion ramp spring with a 6.33 in.-lbs rating.

Stock# 1577006
Plain finish right hand torsion ramp spring with a 6.33 in.-lbs rating.

Stock# 5445104
FLEET ENGINEERS left roadside spring assembly for dual operator systems includes cable drum and bearing assembly, winding cone wound onto spring for stronger design, and internal spring spacer. White color code with 35" length.
SUPPLIES LIMITED

Stock# 1577058
Plain finish left hand torsion ramp spring with a 15.6 in.-lbs rating per degree or 1950 in-lbs. at 125°.

Stock# 1577059
Plain finish right hand torsion ramp spring with a 15.6 in.-lbs rating per degree or 1,950 in-lbs. at 125°.

Stock# 1577056
Plain finish left hand torsion ramp spring with a 18.0 in.-lbs rating per degree or 2246 in-lbs. at 125°.

Stock# 1577057
Plain finish right hand torsion ramp spring with a 18.0 in.-lbs rating per degree or 2246 in-lbs. at 125°.

Stock# 1577060
Plain finish left hand torsion ramp spring with a 19.1 in.-lbs rating per degree or 2,387 in-lbs. at 125°.

Stock# 1577061
Plain finish right hand torsion ramp spring with a 19.1 in.-lbs rating per degree or 2387 in-lbs. at 125°.

Stock# 1326221
Plain finish left hand torsion ramp spring with a 21-23 in.-lbs rating.

Stock# 1326222
Plain finish right hand torsion ramp spring with a 21-23 in.-lbs rating.

Stock# 1577009
Plain finish left hand torsion ramp spring with a 25.5 in.-lbs rating.

Stock# 1577010
Plain finish right hand torsion ramp spring with a 25.5 in.-lbs rating.

Stock# 1577007
Plain finish left hand torsion ramp spring with a 31.3 in.-lbs rating.

Stock# 1577008
Plain finish right hand torsion ramp spring with a 31.3 in.-lbs rating.

Stock# 1577012
Left hand continuous coil ramp assist spring.
13.62" body length, 50 total coils and a 1-1/2" outside diameter.

Stock# 1577013
Right hand continuous coil ramp assist spring.
13.62" body length, 50 total coils and a 1-1/2" outside diameter.

Stock# 1577011
Designed to assist with the lifting of ramps on heavy equipment trailers. Manufactured with 3/8" steel. Measurements: Outside of leg to outside of leg: 14.25"  Leg Length: 4.25"  Shaft I.D.: 1-1/2"

Stock# 1577068
The Overhead Ramp Door Spring System is designed for enclosed trailers. The system features a single drum and cable. The mounting bracket has two 3/8" holes that allow the installer to bolt the spring to the rear header. All mounting Hardware included except for mounting bolts. Single spring - 53" - 50 lbs.
SUPPLIES LIMITED

Stock# 1577064
Overhead Ramp Door Spring System is designed for enclosed trailers. The system features a dual drum and cable. The mounting bracket has two 3/8" holes that allow the installer to bolt the spring to the rear header. All mounting Hardware included except for mounting bolts. Single spring - 66" - 80 lbs. (Dual Drum)
SUPPLIES LIMITED

Stock# 1577066
Overhead Ramp Door Spring System is designed for enclosed trailers. The system features a double drum and cable. The mounting bracket has two 3/8" holes that allow the installer to bolt the spring to the rear header. All mounting Hardware included except for mounting bolts. Double spring - 81" - 2 x 60 lbs. (120 lbs.)

Stock# 1577067
Overhead Ramp Door Spring System is designed for enclosed trailers. The system features double drums and cables. The mounting bracket has two 3/8" holes that allow the installer to bolt the spring to the rear header. All mounting Hardware included except for mounting bolts. Double spring - 96" - 2 x 80 lbs. (160 lbs.)

Stock# 1577070
Overhead ramp door cables have an 80 lb. door capacity and feature aluminum eye ends. Each cable is 1/8" - 7 x 7 and measures 110" in length. (Sold in Pairs)
SUPPLIES LIMITED

Stock# 1660034
CAR MATE overhead ramp door cables feature aluminum eye ends. Each cable is 1/8" - 7 x 7 and measures 130" in length. (Sold in Pairs)

Stock# 1577071
Overhead ramp door cables have 120 - 160 lb. door capacity and feature aluminum eye ends. Each cable is 1/8" - 7 x 7 and measures 150" in length. (Sold in Pairs)

Stock# 1660035
CAR MATE overhead ramp door cables feature aluminum eye ends. Each cable is 1/8" - 7 x 7 and measures 170" in length. (Sold in Pairs)

Stock# 1577072
Overhead ramp door cables feature aluminum eye ends. Each cable is 1/8" - 7 x 7 and measures 174" in length. (Sold in Pairs)

Stock# 1577073
The M3 standard 5" cable drums are specifically used with spring assist lift systems. Kit includes a left and right drum.

Stock# 1660036
CAR MATE over head door cable drums are specifically used with spring assist lift systems. Kit includes 1 left red-coded drum only.

Stock# 1660037
CAR MATE over head door cable drums are specifically used with spring assist lift systems. Kit includes one right black-coded drum only.

Stock# 7110109
BRI-MAR Lower Vertical Tailgate Pin for dump trailer gates. This pin is 1/2" in diameter.

Stock# 7110108
BRI-MAR Upper Horizontal Tailgate Pin and Clip for dump trailer gates. This pin is 3/4" in diameter with a 1/8" diameter clip.

Stock# 1326096
Forged 1040 steel hitch pins have a yellow zinc plated finish and a spring wire handle. Includes a zinc plated pin clip. Shaft measures 1/2" x 4-1/4"

Stock# 1326339
Forged 1040 steel hitch pins have a yellow zinc plated finish and a spring wire handle. Includes a zinc plated pin clip. Shaft measures 3/4" x 4-1/4"

Stock# 1326340
Forged 1040 steel hitch pins have a yellow zinc plated finish and a spring wire handle. Includes a zinc plated pin clip. Shaft measures 5/8" x 6-1/4"

Stock# 1326099
Forged 1040 steel hitch pins have a yellow zinc plated finish and a spring wire handle. Includes a zinc plated pin clip. Shaft measures 3/4" x 6-1/4"

Stock# 1326341
Forged 1040 steel hitch pins have a yellow zinc plated finish and a spring wire handle. Includes a zinc plated pin clip. Shaft measures 7/8" x 6-1/4"

Stock# 1326343
Forged 1040 steel hitch pins have a yellow zinc plated finish and a spring wire handle. Includes a zinc plated pin clip. Shaft measures 1-1/8" x 6-1/4"

Stock# 1326334
Poly-coated hitch pins have a powder coated steel shank and a high visibility blue poly-coated handle which makes the pin easy to see. Includes a zinc plated pin clip. Shank measures 1/2" x 4"

Stock# 1326335
Poly-coated hitch pins have a powder coated steel shank and a high visibility blue poly-coated handle which makes the pin easy to see. Includes a zinc plated pin clip. Shank measures 5/8" x 4"

Stock# 1326336
Poly-coated hitch pins have a powder coated steel shank and a high visibility blue poly-coated handle which makes the pin easy to see. Includes a zinc plated pin clip. Shank measures 3/4" x 4-1/2"

Stock# 1326078
Yellow zinc plated linch pin can be used to secure utility trailer ramp gates, cargo trailer doors and windows.

Stock# 1326079
Yellow zinc plated linch pin can be used to secure utility trailer ramp gates, cargo trailer doors and windows.

Stock# 7122035
CAM Superline Yellow zinc plated linch pin can be used to secure utility trailer ramp gates, cargo trailer doors and windows.

Stock# 7107093
Big Tex Yellow zinc plated lynch pin with 10" lanyard, commonly found on Big Tex trailers, can be used to secure utility trailer ramp gates, cargo trailer doors and windows.

Stock# 5207115
BULLDOG zinc plated lynch pin can be used to secure utility trailer ramp gates, cargo trailer doors and windows.
SUPPLIES LIMITED

Stock# 5445022
FLEET ENGINEERS Roll-Up door cables are constructed with heavy-duty 7 x 19 aircraft cable and have aluminum eye end with 1/4" cable eye. (Sold in Pairs)
SUPPLIES LIMITED

Stock# 5422227
Yellow zinc plated lynch pin, commonly found on Shoreland'r trailers, can be used to secure utility trailer ramp gates, cargo trailer doors and windows.

Stock# 5422238
SHORELAND'R square retainer pin 1/4" x 2.5" shaft, can be used to secure coupler locks and many other trailer components.

Stock# 1326161
Yellow zinc plated snapper pin can be used to secure utility trailer ramp gates, doors and coupler latches.

Stock# 7122034
Yellow zinc plated snapper pin can be used to secure utility trailer ramp gates, doors and coupler latches.

Stock# 1326162
BUYERS PRODUCTS yellow zinc plated snapper pin can be used to secure utility trailer ramp gates, doors and coupler latches.

Stock# 1326620
Zinc plated safety pin can be used to secure pintle hooks, heavy duty couplers and ramp gates.
Pin: 3/8" D x 2-1/4" L   Chain: 8" Long

Stock# 5445107
FLEET ENGINEERS shaft is constructed of 1" outside diameter heavy-duty steel tubing. Holes are drilled in one end only for cotter pins, with other end not drilled for flexibility. Measures 87"
SUPPLIES LIMITED - 2 left in stock

Stock# 7122149
CAM Superline Hitch Pin and Clip for dump trailer gates and hitches. This pin is 1" in diameter, 5-1/4" long and comes with a 1/8" diameter clip.

Stock# 7122032
CAM Superline Lower Vertical Tailgate Pin and Clip for dump trailer gates. This pin is 1/2" in diameter with a 1/8" diameter clip.

Stock# 5445108
Fleet Engineers shaft is constructed of 1″ outside diameter heavy-duty steel tubing. Holes are drilled in one end only for cotter pins, with other end not drilled for flexibility. Measures 93"
SUPPLIES LIMITED - 1 left in stock

Stock# 5445109
FLEET ENGINEERS dual overhead door spring shaft is constructed of 1" outside diameter heavy-duty steel tubing. Holes are drilled in one end only for cotter pins, with other end not drilled for flexibility. Measures 96"
SUPPLIES LIMITED - 2 left in stock

Stock# 5445105
FLEET ENGINEERS spring spacer for dual spring operator assemblies features extruded PVC construction with zinc plated thrust washer. Measures 33"
SUPPLIES LIMITED

Stock# 5445106
The Fleet Engineers spring spacer for dual spring operator assemblies features extruded PVC construction with zinc plated thrust washer. Measures 35"
SUPPLIES LIMITED - 2 left in stock

Stock# 5445092
FLEET ENGINEERS 89.5" shaft for single spring operator assemblies is constructed of 1.00″ o.d. heavy-duty steel tubing.
SUPPLIES LIMITED - 2 left in stock

Stock# 5445091
FLEET ENGINEERS 96" shaft for single spring operator assemblies is constructed of 1.00″ o.d. heavy-duty steel tubing.
SUPPLIES LIMITED - 3 left in stock

Stock# 5445112
FLEET ENGINEERS dual spring black nylon cable drum and bearing assembly. The cable drums are grooved to prevent cables from binding or wearing prematurely. Right Curbside.
SUPPLIES LIMITED

Stock# 5445099
Features a zinc plated finish 1.00″ bearing with operator bracket flange. Factory installation assures proper bearing alignment
SUPPLIES LIMITED

Stock# 5445122
FLEET ENGINEERS zinc plated door roller has a 2.50" L x 1.00" D and an overall length of 3.25". The shaft and raceways are hardened and it has a seven roller ball design. Washers used as spacers to keep door alignment square with track are sold separately.
SUPPLIES LIMITED

Stock# 5445123
FLEET ENGINEERS zinc plated door roller has a 3.25" L x 1.00" D and an overall length of 4.09". The shaft and raceways are hardened and it has a seven roller ball design. Washers used as spacers to keep door alignment square with track are sold separately.
SUPPLIES LIMITED

Stock# 5445120
The zinc plated cable anchor bracket allows proper rotation of the cable head.
SUPPLIES LIMITED

Stock# 5445121
FLEET ENGINEERS RoadKote finished heavy-duty cable anchor bracket allows proper rotation of the cable head on flush mount 2″ roller doors.
SUPPLIES LIMITED

Stock# 5445135
The Fleet Engineers side seal is extruded from long lasting rubber and prevents dirt and moisture from entering cargo bay. Used with standard J channel vertical angle with 1.00″ track. Dimensions: 116.00" x 1.69".
SUPPLIES LIMITED - 2 left in stock

Stock# 5445128
FLEET ENGINEERS bottom seal retainer angle for recessed 1" roller doors fits both standard and heavy duty bottom seals. The galvanized steel construction give it extra strength and corrosion resistance. It also has pre-punched holes for added convenience. Measures 84.00" x .66" x 2.62".
SUPPLIES LIMITED - 2 left in stock

Stock# 5445129
FLEET ENGINEERS bottom seal retainer angle for recessed 1" roller doors fits both standard and heavy duty bottom seals. The galvanized steel construction give it extra strength and corrosion resistance. It also has pre-punched holes for added convenience. Measures 90.00" x .66" x 2.62".
SUPPLIES LIMITED - 1 left in stock

Stock# 5445130
Fleet Engineers bottom seal retainer angle for recessed 1" roller doors fits both standard and heavy duty bottom seals. The galvanized steel construction give it extra strength and corrosion resistance. It also has pre-punched holes for added convenience. Measures 96.00" x .66" x 2.62".
SUPPLIES LIMITED - 2 left in stock