Trailer Door and Ramp Gate Hinges

Stock# 1326240
BUYERS PRODUCTS 3-5/8" Stainless Steel strap hinge with a 5/16" dia. pin and nylon bushing.

Stock# 1326237
Zinc Plated 8" steel strap hinge with a 1/2" dia. steel pin and steel thrust bearings.

Stock# 1326238
Zinc Plated 12" steel strap hinge with a 1/2" dia. steel pin and steel thrust bearings.

Stock# 1660020
CAR MATE galvanized 12" steel strap hinge with a 1/2" dia. steel pin and steel thrust bearings. Commonly used on Car Mate brand utility and enclosed trailers. Hardware not included.
SUPPLIES LIMITED

Stock# 7107128
BIG TEX 12" Zinc Plated Steel Strap Hinge with 180° rotation relative to mounting surface. It comes with a 1/2" diameter stainless steel pin.

Stock# 7107127
Big Tex 12" Zinc Plated Steel Strap Hinge with 270° rotation relative to mounting surface. It comes with a 1/2" diameter stainless steel pin.
SUPPLIES LIMITED

Stock# 1326239
Zinc Plated 16" steel strap hinge with a 1/2" dia. steel pin and steel thrust bearings.

Stock# 1660021
CAR MATE Galvanized 16" steel strap hinge with a 1/2" dia. steel pin and steel thrust bearings. Commonly used on Car Mate brand utility and enclosed trailers. Hardware not included.

Stock# 7107132
Big Tex 2" x 2" Steel Butt Hinge is made of .082" thick cold rolled steel.  It comes with a 3/16" diameter pin and no pre-drilled mounting holes.
SUPPLIES LIMITED

Stock# 7107134
BIG TEX 4" x 4" Steel Butt Hinge is made of .130" thick cold rolled steel. It comes with a 9/32" diameter pin and no pre-drilled mounting holes.
SUPPLIES LIMITED

Stock# 7107135
Big Tex 4" x 4" Steel Butt Hinge is made of stainless steel. It comes with a 1/8" diameter pin and no pre-drilled mounting holes.
SUPPLIES LIMITED

Stock# 7107137
Big Tex Stainless Steel Continuous Hinge 1-1/2" x 6' is made of .05" stainless steel. It comes with a 1/8" diameter pin and an open width of 1-1/2".
SUPPLIES LIMITED

Stock# 7107138
Big Tex Steel Continuous Hinge 1/2" x 6' is made of .075" 14 gauge steel. It comes with a 3/16" diameter pin and an open width of 1-1/2".
SUPPLIES LIMITED

Stock# 7107139
BIG TEX Steel Continuous Hinge 2-1/2" x 6' is made of .075" 14 gauge steel. It comes with a 3/16" diameter pin and an open width of 2-1/2".

Stock# 7107140
BIG TEX Steel Continuous Hinge 3" x 6' is made of .075" 14 gauge steel. It comes with a 1/4" diameter pin and an open width of 3".
SUPPLIES LIMITED

Stock# 1326284
BUYERS PRODUCTS steel continuous hinge for ramp doors has equal leaves and steel pins. 72" length x 3" open width.

Stock# 1660022
CAR MATE steel ramp door hinge with a 1/2" diameter steel pin, steel thrust bearings, and (1) grease fitting. Commonly used on Car Mate brand utility and car hauler trailers. Hardware not included.

Stock# 1326287
BUYERS PRODUCTS forged steel butt hinge consists of drop forged butt, hinge pin and cotter key.

Stock# 7107131
BIG TEX Formed Steel Hinge Strap with grease fitting is made of .307" thick steel. It is for a weld on application and has an overall length of 3-9/32".

Stock# 1326572
BUYERS PRODUCTS formed steel hinge strap has a 17/32" hole to except a shaft and create a hinge where one is needed. May be bolted, welded, or riveted.

Stock# 1326571
BUYERS PRODUCTS formed steel hinge strap with straight leaf includes zinc washer, hex head cap screw, locknut and plastic bushing.

Stock# 1326285
Formed steel hinge strap with short leaf includes zinc washer, hex head cap screw, locknut and plastic bushing.

Stock# 1326286
Formed steel hinge strap with long leaf includes zinc washer, hex head cap screw, locknut and plastic bushing.

Stock# 1326410
Heavy-duty drop forged lower hinge and latch assembly for 1" tailgate post.

Stock# 1326411
Heavy-duty drop forged lower hinge and latch assembly for 1-1/4" tailgate post.

Stock# 7107136
BIG TEX Weld On Hinge Pin with Grease Fitting is made of steel and has a 4-1/2" overall length. It is a 2 piece system with a body diameter of 3/4" and a pin diameter of 1/2".