Trailer Fender Brackets and Hardware

Stock# 5421095
Venture galvanized tandem spring hanger for 20" double eye leaf spring applications. Measures 70" in total length and is made for 3" wide frames.
SUPPLIES LIMITED

Stock# 5419347
KARAVAN spring hanger/fender bracket combo can fit 34.8" or 36.5" fenders for 12"/13" and 13"/14" tires on a tandem axle trailer. Bracket has a galvanized plated finish for superior corrosion resistance. Mounting hardware not included.

Stock# 5419348
KARAVAN galvanized fender bracket measures 1-5/8" x 10-3/4". 1/2" mounting holes for 2" to 2-1/2" wide frame rails. Sold as each.

Stock# 5257107
Galvanized flush mount  fender bracket for 8" and 12"  plastic fenders. Fits Tie Down 3" channel. Two brackets needed per fender. Brackets are 4"H x 7-3/8"W and have pre-punched holes for 3/8" bolts (not included). Sold as each

Stock# 5256252
Galvanized flush mount  fender brackets for 8" and 12"  plastic fenders. Fits Tie Down 17026 and 17033 plastic fenders. Two brackets used per fender. Brackets are 4"H x 6"W and have pre-punched holes for 3/8" bolts. Includes 2 brackets for 1 fender hardware.

Stock# 5256251
Galvanized flush mount fender brackets for 8" and 12" fenders.Two brackets used per fender. Brackets are 6-3/8"H x 5-3/4"W and have pre-punched holes for 3/8" bolts (not included). Includes 2 brackets for 1 fender.

Stock# 5257108
Galvanized double mount fender bracket for 8" and 12" fenders.Two brackets needed per fender. Brackets are 2-1/8"H x 5-3/4"W and have pre-punched holes for 3/8" bolts (not included). Sold as each

Stock# 5256250
Galvanized offset fender mounting brackets for 8" and 12" fenders.Two brackets used per fender. Brackets are 6-3/4"H x 8-3/8"W x 1/4"T and have pre-punched holes for 3/8" bolts (not included). Includes 2 brackets for one fender.

Stock# 5212056
CE SMITH galvanized fender mounting brackets for round fenders up to 7" wide. Brackets are 5-1/4"H x 6"W and have pre-punched holes for 3/8" bolts.

Stock# 5212057
CE SMITH galvanized fender mounting brackets for round fenders 8" and 9" wide. Brackets are 8-1/4"H x 6-1/2"W and have pre-punched holes for 3/8" bolts. Includes brackets for one fender.

Stock# 5212153
CE SMITH Bolt-on fender mounting brackets are suitable for many applications with no welding required. Brackets mount to the side of the frame and to the under side of the fender. 1-Pair (3/8" hardware not included)

Stock# 1041217
Galvanized trailer fender mounting bracket is designed for small plastic fenders on 14' model LOADRITE trailers.

Stock# 1041433
LOADRITE galvanized steel fender step clamping plate measures 2" tall x 4.74" wide with a 0.25" thickness. This item was intended to be used with aluminum fender step supports and tandem pontoon spring supports.

Stock# 5212119
CE SMITH 15-1/4" long, pre-punched hot dip galvanized step pad mounts under 3" frame, two brackets required per fender.

Stock# 5256108
13-1/4" long, pre-punched galvanized step bracket mounts under 3" frame, two brackets required per fender.
Designed for stock# 5256007 Large Plastic Fender.

Stock# 5256098
14.37" long, pre-punched galvanized step bracket mounts under 3" frame, two brackets required per fender. Allows up to 3" offset of fender from trailer frame.

Stock# 5454084
SeaLion / TideWater heavy-duty 10 gauge pre-punched galvanized tandem fender center bracket mounts under 3" frame. Holes on the sides are 7/16" and the holes on the top are 1/2". Mounting hardware not included.
SUPPLIES LIMITED

Stock# 5454082
SeaLion / TideWater heavy-duty 10-gauge pre-punched galvanized tandem fender bracket mounts under 3" frame. Holes on the sides are 7/16" and the holes on the top are 1/2". Mounting hardware not included.

Stock# 5454081
SeaLion / TideWater heavy-duty 10 gauge pre-punched galvanized tandem fender bracket mounts under 3" frame. Holes on the sides are 7/16" and the holes on the top are 1/2". Mounting hardware not included.

Stock# 5454083
SeaLion / TideWater heavy-duty 10 gauge pre-punched galvanized tandem fender center bracket mounts under 3" frame. Holes on the sides are 7/16" and the holes on the top are 1/2". Mounting hardware not included.

Stock# 1041318
LOADRITE 14" long x 4.25" width x 1.625" height, pre-punched galvanized step bracket mounts under 3" frame on right side rear or left side front of trailer. Allows up to 3-1/4" offset of fender from trailer frame. Designed to be used with steel and plastic trailer fenders.

Stock# 1041319
LOADRITE 14" long x 4.25" width x 1.625", pre-punched galvanized step bracket mounts under 3" frame on right side front or left side rear of trailer. Allows up to 3-1/4" offset of fender from trailer frame. Designed to be used with steel and plastic trailer fenders.

Stock# 1041423
LOADRITE heavy-duty 11 gauge pre-punched galvanized center fender bracket measures 1.75″ Wide × 1.25″ Tall × 13.25″ Long and is used on all Loadrite tandem trailers. Mounting hardware not included.

Stock# 1041352
LOADRITE aluminum fender step has pre-drilled u-bolt holes and is used on the left or right side of all LoadRite aluminum frame trailers. Measurements: 3.45" X 1.64" X 13.50"

Stock# 1041353
LOADRITE aluminum fender step has pre-drilled u-bolt holes and is used on the left or right side of all Loadrite aluminum frame trailers. Measurements: 3.45" X 1.64" X 14.50"

Stock# 5291212
EZ-LOADER 15" long, heavy-duty pre-punched aluminum fender bracket fits on the right side rear or left side front of EZ-Loader trailers. Mounting hardware not included. Designed to be used with plastic trailer fenders on aluminum framed trailers.

Stock# 5291211
EZ-LOADER 15" long, heavy-duty pre-punched aluminum fender bracket fits on the left side rear or right side front of EZ-Loader trailers. Mounting hardware not included. Designed to be used with plastic trailer fenders on aluminum framed trailers.

Stock# 5291221
EZ-LOADER 14" long, heavy-duty pre-punched galvanized tapered fender bracket. It fits on the left side front or right side rear of single or tandem EZ-Loader trailers. Designed to be used with steel trailer fenders on 2" or 3" frames. Mounting hardware not included.
SUPPLIES LIMITED

Stock# 5291222
EZ-LOADER 14" long, heavy-duty pre-punched galvanized tapered fender bracket. It fits on the left side rear or right side front of single or tandem EZ-Loader trailers. Designed to be used with steel trailer fenders on 2" or 3" frames. Mounting hardware not included.

Stock# 5291142
EZ-LOADER heavy-duty pre-punched galvanized step bracket mounts to 2" wide frame, one bracket required per step. Designed to mount 13" EZ-LOADER plastic trailer fenders.

Stock# 5291143
EZ-LOADER heavy-duty pre-punched galvanized step bracket mounts to 2" wide frame, one bracket required per step. Designed to mount 14" EZ-LOADER plastic trailer fenders.

Stock# 5291144
EZ-LOADER heavy-duty pre-punched galvanized step bracket mounts to 3" wide frame, one bracket required per step. Designed to mount 14" EZ-LOADER plastic trailer fenders.

Stock# 5428026
MAGIC TILT galvanized fender bracket for 10" and 12" fenders. Brackets are 5-3/8" x 4" and have pre-punched holes. Mounting hardware sold separately. Sold as each.

Stock# 5428044
MAGIC TILT pre-punched galvanized fender step bracket measures 8" long. Mounting hardware sold separately.

Stock# 5428045
MAGIC TILT pre-punched galvanized fender step bracket measures 12" long. Mounting hardware sold separately.

Stock# 5428050
MAGIC TILT 10" long, Aluminum step pad fender mounting bracket with end cap. These step pad brackets are designed to be used with metal fenders. Mounting hardware is not included.
NOTE: Bracket is for Right Front or Left Rear only if angled side is mounted to fender

Stock# 5428049
MAGIC TILT 10" long, Aluminum step pad fender mounting bracket with end cap. These step pad brackets are designed to be used with metal fenders. Mounting hardware is not included.
NOTE: Bracket is for Left Front or Right Rear only if angled side is mounted to fender.

Stock# 5428052
MAGIC TILT 12" long, Aluminum step pad fender mounting bracket with end cap. These step pad brackets are designed to be used with metal fenders. Mounting hardware is not included.
NOTE: Bracket is for Right Front or Left Rear only if angled side is mounted to fender.

Stock# 5428051
MAGIC TILT 12" long, Aluminum step pad fender mounting bracket with end cap. These step pad brackets are designed to be used with metal fenders. Mounting hardware is not included.
NOTE: Bracket is for Left Front or Right Rear Only if angled side is mounted to fender.

Stock# 5428053
MAGIC TILT 14" long, aluminum step pad fender mounting bracket with end cap. These step pad brackets are designed to be used with metal fenders. Mounting hardware is not included.
NOTE: Bracket is for Left Front or Right Rear Only if angled side is mounted to fender.

Stock# 5428054
MAGIC TILT 14" long, Aluminum step pad fender mounting bracket with end cap. These step pad brackets are designed to be used with metal fenders. Mounting hardware is not included.
NOTE: Bracket is for Right Front or Left Rear Only if angled side is mounted to fender.

Stock# 5430003
ROAD KING diamond plate aluminum fender step is constructed from heavy duty aluminum and measures 16" in length x 3" wide. (Left Front or Right Rear) Mounting hardware not included.

Stock# 5430004
ROAD KING diamond plate aluminum fender step is constructed from heavy duty aluminum and measures 16" in length x 3" wide. (Right Front or Left Rear) Mounting hardware not included.

Stock# 5430079
ROAD KING knurled aluminum fender step is constructed from heavy duty aluminum and measures 13" in length x 4" wide. (Left Front or Right Rear) Mounting hardware not included.

Stock# 5430080
ROAD KING knurled aluminum fender step is constructed from heavy duty aluminum and measures 13" in length x 4" wide. (Right Front or Left Rear) Mounting hardware not included.

Stock# 5442023
CONTINENTAL knurled aluminum step pad measures 14" long x 4" wide. Pad is universal and can be mounted on the left or right side. Mounting hardware is not included.

Stock# 5421067
VENTURE galvanized fender bracket is used with 13" composite fenders. The bracket measures 13-3/4" long and is designed for the fender on the Right Rear or Left Front side of the trailer looking at it from the rear. Mounting hardware sold separately.

Stock# 5421068
VENTURE galvanized fender bracket is used with 13" composite fenders. The bracket measures 13-3/4" long and is designed for the fender on the Right Front or Left Rear of the trailer looking at it from the rear. Mounting hardware sold separately.

Stock# 5419180
KARAVAN 7.13" x 3.5" heavy-duty pre-punched galvanized fender bracket for Karavan Boat Trailers. Mounting hardware not included and sold as each.

Stock# 5419271
KARAVAN galvanized fender bracket is used when mounting step fenders. 1/2" Mounting holes are pre-punched but mounting hardware not included. Sold as each.

Stock# 5419074
KARAVAN 15.5" long heavy-duty 10-gauge pre-punched galvanized step bracket mounts to 3" frame. Mounting hardware not included.

Stock# 5419036
KARAVAN 11.69" long, heavy-duty pre-punched zinc plated step bracket for tandem fenders on Karavan Boat Trailers. Mounting hardware not included. (Right side only)

Stock# 5419035
KARAVAN 11.69" long, heavy-duty pre-punched zinc plated step bracket for tandem fenders on Karavan Boat Trailers. Mounting hardware not included.

Stock# 5454087
SeaLion / TideWater 17-1/2" long, heavy-duty pre-punched galvanized step bracket mounts to the frame of the trailer. Mounting hardware not included.

Stock# 1041389
LOADRITE 12" long, heavy-duty pre-punched galvanized step bracket mounts under the frame of the trailer. Mounting hardware not included. Designed to be used with steel and plastic trailer fenders.

Stock# 5212199
CE SMITH Bolt-on fender mounting brackets are suitable for many applications with no welding required. Brackets mount to the side of the frame and to the under side of the fender.

Stock# 5291203
EZ-LOADER single axle spring hanger / composite fender bracket combo has 26" spring centers and 20-3/4" frame mounting holes. Mounting hardware not included.

Stock# 5419037
KARAVAN spring hanger/fender bracket combo has 26-1/4" spring centers and accepts 37" fenders for 12" or 13" tires. Bracket is galvanized superior corrosion resistance. Mounting hardware not included. Fits 2" wide frames.

Stock# 5419264
KARAVAN spring hanger/fender bracket combo has 23" spring centers and accepts 37" fenders for 12" or 13" tires". Bracket is galvanized superior corrosion resistance. Mounting hardware not included. Fits 2" wide frame. Uses 1/2" spring bolts.

Stock# 5419269
KARAVAN slipper spring hanger/fender bracket combo has 26.25" spring centers and accepts 37" fenders for 12" or 13" tires". Bracket is galvanized superior corrosion resistance. Mounting hardware not included.

Stock# 5419038
KARAVAN spring hanger/fender bracket combo has 26-1/4" spring centers and accepts 40" fenders for 13" or 14" tires. Bracket has a galvanized finish for superior corrosion resistance. Mounting hardware not included.

Stock# 5419270
KARAVAN slipper spring hanger/fender bracket combo has 26.25" spring centers and accepts 40" fenders for 13" tires". Bracket is galvanized superior corrosion resistance. Mounting hardware not included.

Stock# 5419039
KARAVAN spring hanger/fender bracket combo has 26-1/4" spring centers and accepts 43" fenders for 14" or 15" tires. Bracket has a zinc plated finish for superior corrosion resistance. Mounting hardware not included.

Stock# 5419089
KARAVAN spring hanger/fender bracket combo accepts 26-1/4" spring centers and 34.8" fenders for 12" or 13" tires on a tandem axle trailer. Bracket has a zinc plated finish for superior corrosion resistance. Mounting hardware not included.

Stock# 5419142
KARAVAN zinc plated spring hanger/fender bracket combo accepts 26-1/4" spring centers and 38.25" fenders for 14" or 15" tires on a tandem axle trailer. Bracket has a galvanized finish for superior corrosion resistance. Mounting hardware not included.

Stock# 5422278
SHORELAND'R galvanized spring hanger/fender bracket combo has 21-3/4" spring centers and accepts open eye leaf springs. Fender brackets are on a 31" center and work with ShoreLand'r fenders with an inside length of 27".

Stock# 5442052
CONTINENTAL fender support bracket is constructed with 3/8" aluminum angled flat bar and measures 15-1/4" long.  Bracket is NOT pre-drilled.

Stock# 5428034
MAGIC TILT aluminum fender brackets are used to brace and provide support to tandem or triple aluminum trailer fenders. Measures 20" in length. Mounting hardware sold separately.

Stock# 5419265
KARAVAN spring hanger/fender bracket combo has 26-1/4" spring centers and accepts 43" fenders for 14" or 15" tires. Bracket has a galvanized finish for superior corrosion resistance. Mounting hardware not included.

Stock# 5428033
MAGIC TILT aluminum fender brackets are used to brace and provide support to tandem or triple aluminum trailer fenders. Measures 22" in length. Mounting hardware sold separately.

Stock# 5421020
VENTURE galvanized fender brace for use with tandem or triple aluminum trailer fenders. Measures 15-1/2" in length.  Mounting hardware sold separately.

Stock# 5419075
KARAVAN Stainless Steel Single Fender Hardware Kit is for mounting a single step fender.
Kit Includes:  (4) 1/4" nylock nuts,  (4) 1/4"-20 x 1-1/2" Screws

Stock# 5419297
KARAVAN Stainless Steel Single Fender Hardware Kit is for mounting a single step fender.
Kit Includes:  (8) 1/4" nylock nuts,  (8) 1/4"-20 x 1-1/2" Screws

Stock# 5428165
MAGIC TILT Factory O.E.M. tandem fender pad hardware kit. Zinc plated hardware kit includes lock nuts and bolts.

Stock# 5419105
KARAVAN Galvanized Non-Step Fender Hardware Kit is for mounting fenders without steps. Kit Includes:  (4) 3/8"-16 Centerlock Nuts,  (4) 3/8"-16 x 7/8" Carriage Bolts (4) 3/8" Flat Washers

Stock# 5428166
MAGIC TILT Factory O.E.M. tandem fender pad hardware kit. Stainless steel hardware kit includes lock nuts and bolts.
SUPPLIES LIMITED

Stock# 5428035
MAGIC TILT end cap for 10" thru 14" aluminum step pads. Black plastic end cap fits right side aluminum step pads.
Holes are not pre-drilled.

Stock# 5428036
MAGIC TILT end cap for 10" thru 14" aluminum step pads. Black plastic end cap fits left side aluminum step pads. Holes are not pre-drilled.

Stock# 5428192
MAGIC TILT Factory original black ABS plastic fender back measures 23-1/8" long x 5-7/8" high x 3/8" thick. Sold as each.
SUPPLIES LIMITED

Stock# 5422308
SHORELAND'R spring hanger/fender bracket combo has 25" spring centers and accepts open eye leaf springs. Fender brackets are on a 33-5/8" center and  work with ShoreLand'r fenders that measure 42-1/2" overall length.

Stock# 5422213
SHORELAND'R spring hanger/fender bracket combo has 21-1/2" spring centers and accepts open eye leaf springs. Fender brackets are on a 31" center and  work with ShoreLand'r fenders that measure 39-1/2" overall length.

Stock # 5422309
SHORELAND'R 3/8"-16 x 1" stainless steel carriage bolt is a grade-5 bolt commonly used to mount Shoreland'r bunk brackets.

Stock # 5422222
SHORELAND'R 5/16" x 1" stainless steel carriage bolt is a grade-5 bolt commonly used to mount Shoreland'r plastic step fenders to the bracket.

Stock # 5422311
SHORELAND'R 3/8"-16 lock nut is commonly used to mount Shoreland'r bunk brackets.

Stock# 5422224
SHORELAND'R 5/16" carriage bolt nut is commonly used to mount Shoreland'r plastic step fenders to the bracket.

Stock # 5422223
SHORELAND'R 5/16" carriage bolt lock washer is commonly used to mount Shoreland'r plastic step fenders to the bracket.

Stock# 5256070
Includes four grade-5 zinc plated steel bolts, washers and nyloc nuts. Useful for mounting brackets, couplers, fenders, winch stands, and other trailer frame hardware.

Stock# 5256071
Hex Head Bolt set includes four grade 5 zinc plated steel bolts, washers and nyloc nuts. Useful for mounting brackets, couplers, fenders, winch stands, and other trailer frame hardware.

Stock# 5256117
Zinc plated steel standard U-Bolt Kit includes: 1 U-Bolt, 2 flat washers & 2 nyloc nuts.
Leg Length (A) = 4-13/16", Leg Width (B)= 2-1/16", Thread (C)= 2"

Stock# 5256127
Zinc plated steel standard U-Bolt Kit includes: 2 U-Bolts, 4 flat washers & 4 nyloc nuts.
Leg Length (A) = 4", Leg Width (B)= 2-1/8", Thread (C)= 2"

Stock# 5256116
Zinc plated steel standard U-Bolt Kit includes: 1 U-Bolt, 2 flat washers & 2 nyloc nuts.
Leg Length (A) = 3-13/16", Leg Width (B)= 3-1/16", Thread (C)= 1-1/2"

Stock# 5256128
Zinc plated steel standard U-Bolt Kit includes: 2 U-Bolts, 4 flat washers & 4 nyloc nuts.
Leg Length (A) = 3", Leg Width (B)= 3-1/8", Thread (C)= 1-1/2"

Stock# 5256129
Zinc plated steel standard U-Bolt Kit includes: 2 U-Bolts, 4 flat washers & 4 nyloc nuts.
Leg Length (A) = 4", Leg Width (B)= 3-1/8", Thread (C)= 2"

Stock# 1330462BP
BUYERS fender mounting kit for fenders that fit 19.5" - 24.5" truck or trailer dual tires.  This kit is stainless steel and one kit is required per fender.

Stock# 1330461BP
BUYERS fender mounting kit for fenders that fit 19.5" - 24.5" truck or trailer dual tires.  This kit is black powder coated and one kit is required per fender.

Stock# 1330463BP
BUYERS universal fender mounting kit for fenders that fit 19.5" - 24.5" truck or trailer dual tires.  This kit is black powder coated and one kit is required per fender.

Stock# 1326897
BUYERS PRODUCTS fender hanger brackets are used to attach or support fenders or splash guards on heavy duty truck and trailer configurations. (4) poly fender hangar brackets are required per fender. Sold as each.
SUPPLIES LIMITED - 3 left in stock

Stock #1041340
LOADRITE 1/2"-13 x 3/4" trailer fender carriage bolt.

Stock# 5291138
EZ-LOADER washer with bushing is used as a spacer and cushion on composite fender mounting. Also acts as a vibration dampener to the fender. Accepts 3/8" bolts.

Stock# 7110015
BRI-MAR Fender Knob for Car Hauler Model Trailers are designed to secure the fender to the trailer. They make them removable with this knob to allow for more space for a car door to open and close while loaded on the trailer.