Stock# 5291194 EZ-LOADER boat trailer 3" x 1" x 3/16" three hole galvanized frame strap is used on small winch assemblies to even up the winch bracket.
Stock# 5212069 Length = 4", Width = 1-1/4", Hole Center = 2.5", fits 7/16" - 1/2" bolts Use with u-bolts to secure brackets or accessories to trailer frame.
Stock# 5422256 Length = 4-3/4", Width = 1", Hole Center = 3.50", fits 3/8" bolts Frame straps can be used with u-bolts to secure brackets or accessories to trailer frame.
Stock# 5212070 Length = 5", Width = 1-1/4", Hole Center = 3.50", fits 7/16" - 1/2" bolts Use with u-bolts to secure brackets or accessories to trailer frame.
Stock# 1326932 Buyers Products steel frame straps and tie bars can be used with u-bolts or double threaded body tie down rods to attach a trailer to a frame.
Stock# 5212123 Length = 5-3/8", Width = 1-1/2", Hole Center = 3-7/8", Hole Diameter = .570" Use with u-bolts to secure brackets or accessories to trailer frame.
Stock# 5212071 Length = 6", Width = 1-1/4", Hole Center = 4.53", fits 7/16" - 1/2" bolts Use with u-bolts to secure brackets or accessories to trailer frame.
Stock# 5212121 Length (A) = 6", Width (C) = 1-1/2", Hole Center (B) = 4", Hole Diameter = 1/2" x 1" Use with u-bolts to secure brackets or accessories to trailer frame.
Stock# 5212122 Length = 6-3/4", Width = 1-1/2", Hole Center = 5-1/4", Hole Diameter = .570" Use with u-bolts to secure brackets or accessories to trailer frame.
Stock# 5212120 Length = 6-3/4", Width = 1-1/2", Hole Center = 5-1/4", Hole Diameter = .4375" Use with u-bolts to secure brackets or accessories to trailer frame.
Stock# 5421042 VENTURE aluminum u-bolt channel measures 3/4" wide x 3" long x 1/2" high. A 1/2" u-bolt fits in the channel and never touches your aluminum frame.
Stock# 5421080 VENTURE galvanized crossmember bracket measures 3-1/8" wide by 6" high and is used on Venture trailers built in early 2000's that have 3" x 3" frames.
Stock# 7108359 ROCKWELL Galvanized Vertical tubing bracket accepts 2" square tubing, measures 5" high and is used to secure tubing to 3" tall trailer frames while allowing for vertical height adjustment. Mounting hardware sold separately.
Stock# 5256070 Includes four grade-5 zinc plated steel bolts, washers and nyloc nuts. Useful for mounting brackets, couplers, fenders, winch stands, and other trailer frame hardware.
Stock# 5256068 Includes four grade-5 zinc plated steel bolts, washers and nyloc nuts. Useful for mounting brackets, couplers, fenders, winch stands, and other trailer frame hardware. Bolts have 1.125" of thread.
Stock# 5256069 Hex Head Bolt set includes four grade-5 zinc plated steel bolts, washers and nyloc nuts. Useful for mounting brackets, couplers, fenders, winch stands, and other trailer frame hardware.
Stock# 5256071 Hex Head Bolt set includes four grade 5 zinc plated steel bolts, washers and nyloc nuts. Useful for mounting brackets, couplers, fenders, winch stands, and other trailer frame hardware.
Stock# 5256072 Includes four grade-5 zinc plated steel bolts, washers and nyloc nuts. Useful for mounting brackets, couplers, fenders, winch stands, and other trailer frame hardware.
Stock #1299229 HandiMan Truss Head Bolts have a low rounded top head surface with a flat bearing surface underneath. These bolts thread into 1/4-20 nuts or plastic license plate holders (not included).
Stock# 5256273 The Bow Guide Channel Bracket 1/2" flange nut is designed to come through from the inside of the hexagonal holes down the center of the bow guide bracket. A 1/2" bolt (not included) can be used to screw through the nut into the post creating tension and keeping it in place. Hex Head is 3/4" across.
Stock# 5291136 EZ-LOADER boat trailer 4" O.D. x 11/16" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.
Stock# 5291135 EZ-LOADER boat trailer 2-5/8" O.D. x 1/2" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.
Stock# 5291137 EZ-LOADER boat trailer 1-3/8" O.D. x 1/2" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.
Stock# 5291138 EZ-LOADER washer with bushing is used as a spacer and cushion on composite fender mounting. Also acts as a vibration dampener to the fender. Accepts 3/8" bolts.