Trailer Winch Parts and Accessories

Stock# 1568095
StrongArm® Winch Mounting Plate is designed to properly mounting electric winches on narrow trailer winch stands. Included quick mount studs provide quick and easy installation and removal of winch using the keyhole slots in its base

Stock# 1568082
Zinc plated hand crank has a TUFFPLATE® finish for long life and provides ample leverage for manual operation.

Stock# 1568081
Zinc plated hand crank has a TUFFPLATE® finish for long life and provides ample leverage for manual operation.

Stock# 1568080
Zinc plated hand crank has a TUFFPLATE® finish for long life and provides ample leverage for manual operation.

Stock# 1568006
Made to endure the weather, this cover keeps all Dutton-Lainson StrongArm® electric trailer winches clean, dry and looking like new.

Stock# 5127127
Powerwinch Galvanized Electric Winch Cable R3005 comes with the Cable 7/32" by 25'. The 25ft Cable Assembly Kit is used in the RC23, RC30, 712, 912, and 915 trailer winches.

Stock# 5127125
Wire your vehicle for permanent installation applications. Includes 25' of 10 ga. positive wire, 10' of black ground wire, 60 amp. circuit breaker, and winch plug. The 60amp Wiring Harness is used in the RC23, RC30, 712, 912, and 915 trailer winches. 

Stock# 5127123
POWERWINCH Spring Loaded Motor Switch R2007 comes with a rotary switch, a socket, 2 lock nuts, and 2 screws. The Power/Switch Kit is used in the 712 and 912 trailer winches.

Stock# 5127122
Powerwinch clutch control knob R1005 comes with a clutch knob, a jam nut, and a spring. The Clutch Knob Kit is used in the RC23, RC30, 712, and 912 trailer winches.

Stock# 5127121
Powerwinch replacement thrust bearing and washer kit comes with 5 thrust washers, 2 spring washers, 2 bearing washers, a hex nut, and a jam nut. The 1st Shaft Accessory Kit is used in the RC23, RC30, 712, and 912 trailer winches.

Stock# 5127130
Made to endure the weather, this cover keeps Powerwinch RC23, RC30, 712, 912, and 915 electric trailer winches clean, dry and looking like new.

Stock# 5127043
Double your pulling power by using this sturdy pulley system. Fits POWERWINCH Models: 315, 712, 912, 915, T1650, T2400, T3200PO, T4000.
SUPPLIES LIMITED

Stock# 1568010
Wire your vehicle for permanent installation applications. Includes 25' power cable, 8' ground cable, switch and 80 amp circuit breaker. Fits all Dutton-Lainson StrongArm® 12v SA series electric trailer winch models without built-in remotes.

Stock# 1568011
Wire your vehicle for permanent installation applications. Includes 25' power cable, 8' ground cable, Female quick connect end and 80 amp circuit breaker. Fits Dutton-Lainson StrongArm® 12v SA series electric trailer winch models with built-in remote.

Stock# 1568043
StrongArm® switch is a direct replacement for SA5000, SA7000, SA9000, and SA12000 12 volt electric winches.  The switch comes with heavy duty butt splice connectors to make installation easy.

Stock# 1568044
StrongArm® Switch Pocket Plate Repair Kit comes with (2) Lock nuts, (2) Free Running Nuts, (4) Washers,
(1) U-Clip, (2) Bolt Pins, and the (2) Mounting Plates.

Stock# 1568075
Dutton-Lainson Dust cover for StrongArm® 12 volt DC electric winch wiring harnesses. When not trailering, cover open end of plug to keep out dust, mud, etc. Fits onto the 6385 and 6288 connectors.

Stock# 1568008
Quick Connect Plug kit allows easy connection and disconnection of a 12V battery source. Perfect for multiple vehicle applications. Fits 6-16 gauge wire.

Stock# 1568005
Zinc plated hand crank has a TUFFPLATE® finish for long life and provides ample leverage for manual operation. Fits all Dutton-Lainson StrongArm® SA series electric trailer winch models.

Stock# 1568012
Angle mounting plate is used to mount all Dutton-Lainson StrongArm® electric winches to trailer winch stands where insufficient room and improper angle are present.

Stock# 5422288
Replacement Dutton-Lainson 6" Short replacement handle can be used with the following Dutton-Lainson winches: DL600 through DL1400.

Stock# 5020034
Fits Fulton Trailer Winch Models: T1300, T1500, T1500Z
Replace worn out or broken winch handles for ease of operation.
SUPPLIES LIMITED

Stock# 1041320
DUTTON-LAINSON 9-1/2" quick-attach replacement handle can be used with the following models of Dutton-Lainson winches: DL1602ADD, DL1800A, DL2000A, DL2500A, DL3200A, DL3500B. It is also used on many Loadrite boat trailers that came with a 2,000 lb. to 3,200 lb. Dutton-Lainson winch factory installed.

Stock# 1568036
Dutton-Lainson trailer winch ratchet repair kit for models DL600A, DL900A, DL1100A and DL1300A manufactured after 1999. For use on Dutton-Lainson trailer winches only.

Stock# 1568037
Dutton-Lainson trailer winch ratchet repair kit for models DL1402A, DL1602A and DL1602ADD manufactured after 1999. For use on Dutton-Lainson trailer winches only.

Stock# 1568038
Dutton-Lainson trailer winch ratchet repair kit for models DL1800A, DL1802A, DL2000A, DL2102A, DL2500A and DL3200A manufactured after 1999. For use on Dutton-Lainson trailer winches only.

Stock# 1568074
DUTTON-LAINSON Pulley block and swivel hook for double line operation on StrongArm® electric winches. Accepts cable sizes up to 3/8".

Stock# 1326672
BUYERS PRODUCTS Electric Winch Universal Mount is designed to mount the commercial electric winches from buyers (5579500, 5571200). It is a jeep mount and comes with the mounting hardware.
SUPPLIES LIMITED -  1 left in stock