TRITON Gullwing Bar and Tiedowns

Stock# 7102009
1,500 lb. rated capacity. / 500 lb. Working Load Limit. TRITON Ratchet Transom Strap Kit comes with mounting hardware and designed for use with a PWC or light duty boat.

Stock# T7102100
TRITON Aluminum Front Rail Kit is designed to replace or add a front rail onto a Triton ATV series trailer. The kit includes the front rail ( 82" wide), the front rail support pole and all of the attaching hardware.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)
SUPPLIES LIMITED - 1 left in stock

Stock# 7102037
TRITON Black Coated Gullwing Tiedown Bar is designed to be mounted on the front of a snowmobile trailer to help lock in the ski's.  The bar is 46.25" long with a 1/2" mounting hole in the center of the bar and is commonly use on an XT series Triton trailer.

Stock# 7102033
TRITON Gullwing Tiedown Screw is designed to mount and tighten the Triton gullwings to the trailer to lock in the ski's on a snowmobile

Stock# 7102032
TRITON Gullwing Tiedown Screw with cap is designed to mount and tighten the Triton gullwings to the trailer to lock in the ski's on a snowmobile

Stock# 7102070
TRITON Tie Down Flush mount kit includes a pair of 4" diameter round floor mount D-rings and mounting hardware.  Load limit is rated at 1,000 lbs.

Stock# 7102073
TRITON D-Ring Tie Down Kit comes with 4 of the D-Ring and D-ring brackets. The kit also includes all of the necessary hardware to mount brackets to a Triton AUT series trailer with mounting channels in the floor or side rail. D-Ring Dimensions: ID=1" x 1-1/4"  OD= 1-7/16" x 1-9/16"

Stock# 7102071
TRITON Quickslide Tie Down Kit comes with two quickslide I bolts to be used as tie down points. Tie down eyes come with quickslide keeper, a wing nut for tightening, a washer and a square reinforcement piece to add strength.

Stock# 7102072
TRITON Quickslide Plate Tie Down Kit comes with two tie down plates with quickslide mounting hardware. Large hook hole is 9/16" x 1-13/16" and small hook hole has a diameter of 9/16".

Stock# 7102076
TRITON ATV Aluminum Tide down kit is designed to mount in the bottom corner of some Triton ATV trailers.  There will be a recesses groove that run in the inside corner of the floor and wall edge.  This kit includes (2) tie down brackets and all of the hardware to install the brackets.

Stock# 7102126
TRITON insert nut with snap ring is used in many different applications on Triton trailers.  Some applications included their add a nut kit, or the tilt bed tensioner.