UFP - All Other Repair Parts

Stock# 5415147
UFP 38017U outer member is zinc plated and designed specifically for Ranger Trailers that have TieDown Engineering brake actuators and a swing away tongue. Will fit A60, A75, and XR84 Actuators. 

Stock# 5415146
UFP A-75 series replacement bolt on outer member slide assembly is designed to work with the A-60, A-75, and XR-84 hydraulic brake actuators. Zinc Plated for Maximum Corrosion Resistance. Fits on the end of a 3" wide trailer tongue.

Stock# 5415013
UFP Disc Brake Master Cylinder is compatible with the following hydraulic disc brake actuators: A-60, A-70, A-75, A-84 & A-160 with reverse solenoid model 34500U. It features an all aluminum design and a reverse valve drain tube for hookup with a reverse solenoid. (Solenoid Sold Separately)

Stock# 5415018
UFP Drum Brake Master Cylinder is compatible with the following hydraulic drum brake actuators: A-60, A-70, A-75, A-84 & A-160. It features an all aluminum design.

Stock# 5415150
UFP Disc Brake Master Cylinder is compatible with the following hydraulic disc brake actuators: A-60, A-70, A-75, A-84 & A-160.

Stock# 5415007
This 2-1/2" plastic cap is a direct replacement for all A-60, A-65, A-75, and A-84 brake actuators. It is the outer access cap that covers the master cylinder fill plug.

Stock# 5415016
UFP mechanical brake lockout cap is an option for the model A-60 brake actuators. It allows trailers equipped with drum or disc brakes to be backed up over soft ground or up inclines without fully engaging the brakes. The cap is designed to disengage when the trailer is pulled forward after backing up.

Stock# 5415095
UFP A-70 & A-75 Brake Actuator Top Wear Pad #47710

Stock# 5415041
DB-35 Replacement Disc Brake Retainer/Anti-Rattle Clamp. Each DB-35 caliper requires one retainer.

Stock# 5415102
UFP DB-35 Disc Brake Caliper Piston Dust Boot #33307

Stock# 5415071
UFP replacement spring clip for DB-35 trailer brake caliper. Each DB-35 caliper requires 2 spring clips. (Sold as each)

Stock# 5415073
UFP DB-35 Disc Brake Caliper Piston #33005. Replaces worn or corroded DB-35 caliper pistons.

Stock# 5415072
UFP DB-35 Disc Brake Caliper Piston Seal #33004.

Stock# 5415107
UFP DB-35 Disc Brake Caliper Slider Pin Boot #33305.

Stock# 5415014
Replacement Latch / Hitch Pin Kit for A-84 and A-160 brake actuators.

Stock# 5415149
Replacement Latch / Hitch Pin Kit for A-75 brake actuators.

Stock# 5415121
UFP 3.5k Indexable Spindle Bolt is for mounting torsion axle trailing arms to the torsion axle. Bolt is 4" x 5/8".

Stock# 5415123
UFP 3.5k indexable spindle washer is for mounting torsion axle trailing arms to the torsion axle. To be used with bolt that is 4" x 5/8".

Stock# 5415110
UFP 4" retro fit outer member is constructed specifically for Mastercraft Trailers that have reliable brake actuators and a swing away tongue.

Stock# 5415006
UFP Organic Disc Brake Pad set includes one inner and one outer pad for use with DB-42 Disc Brake Calipers. (Replacement pads for 1-caliper)
SUPPLIES LIMITED

Stock# 5415004 
UFP replacement disc brake pad set for Gold Series DB-35 disc brakes. Contains 2 inner and 2 outer pads for one complete axle.

Stock# 5415044
S-Cad Plated steel mounting bracket for UFP DB-42 brake calipers. One required per caliper.

Stock# 5415017
Since disc brakes generate full braking power in reverse, a reverse lockout solenoid should be installed at the actuator before installation of disc brakes. The 12 volt solenoid valve connects to the tow vehicles back up light circuit for automatic brake lockout. Unit can be wired independently or adapted to trailer wire harness with a 5-flat plug on trailer and tow vehicle.

Stock# 5415028
UFP replacement shock absorber for all UFP A-60, A-70, and A-160 hydraulic disc and drum brake actuators.

Stock# 5415042
Replacement Push Rod for UFP single disc or single/tandem drum brake actuators.

Stock# 5415043
Replacement Push Rod for UFP tandem disc brake actuators.

Stock# 5415045
UFP Trailing Arm Replacement Torsion Spindle allows you to easily replace a damaged spindle. Accepts 1-3/8" x 1-1/16" bearings and up to 10-1/4" 4 hole backing plates. Hardware included.

Stock# 5415129
UFP Trailing Arm Replacement Torsion Spindle for Ranger trailers allows you to easily replace a damaged spindle. Accepts 1-3/8" x 1-3/8" bearings and up to 10-1/4" 4 hole backing plates. Hardware included.

Stock# 5415040
UFP zinc plated replacement latch kit for UFP Model A-60 hydraulic brake actuators.

Stock# 5415083
UFP A-60 series replacement zinc plated inner member slide assembly replaces the coupler section of the A-60 series disc or drum brake actuator.  Includes the latch for 2" ball, a brake lockout bracket and actuator cap.
Note: Hydraulics are NOT included.

Stock# 5415104
UFP A-60 Zinc Plated hitch pin kit includes a hitch pin, retaining ring, warning decal and cable.

Stock# 5415114
New style UFP master cylinder boot fits all UFP brake actuator master cylinders.

Stock# 5415105
UFP Zinc Plated Roller pin fits A60, A75 and A84 UFP brake actuators. Measures 3/4" x 4".

Stock# 5415088
UFP A-75 series replacement bolt on outer member slide assembly is designed to work with the A-60, A-75,and XR-84 hydraulic brake actuators. Zinc Plated for Maximum Corrosion Resistance.

Stock# 5415106
UFP Zinc Plated Roller Pin Washer fits on the roller pin behind the snap ring on UFP brake actuators. 3/4" I.D.

Stock# 5415132
UFP Nylon Plated Roller Pin Washer fits on the roller pin behind the snap ring on UFP brake actuators. 3/4" I.D.

Stock# 5415074
UFP DB-35 trailer disc brake caliper slider pin #33007.

Stock# 5415108
UFP DB-35 trailer disc brake caliper slider pin boot #33306.

Stock# 5415003
DB-42 Replacement Brake Caliper Spring Clip. Each DB-42 Caliper requires 2 spring clips. (Sold as each)
SUPPLIES LIMITED

Stock# 5415080
UFP DB-42 Disc Brake Caliper Piston Seal #33040.

Stock# 5415076
UFP DB-42 Disc Brake Caliper Bolt 2-1/2" x 5/16" #33020

Stock# 5415048
Direct replacement plastic fill plug for all UFP brake master cylinders.

Stock# 5415055
UFP disc brake caliper mounting adapter bracket for 5,200-7,000 lb. axles bolts to standard 5 hole brake flange.  S-Cad plated to resist corrosion.

Stock# 5415133
UFP disc brake caliper copper washer banjo fitting. Sold as each.

Stock# 5291265
EZ-LOADER UFP 7/16"-20 x 1" disc brake caliper (DB-35) mounting bolt. Sold as each.

Stock# 5415142
UFP 7/16"-20 x 1" disc brake caliper (DB-35) mounting bolt. Sold as each.

Stock# 5415134
UFP 7/16"-20 x 1" disc brake caliper (DB-35) banjo bolt. Sold as each.

Stock# 5415141
UFP 7/16" disc brake 90 degree banjo fitting with 2 ports. Sold as each.

Stock# 5415049
UFP 7/16" disc brake solid brass banjo fitting. Sold as each.

Stock# 5415051
UFP lockout bracket #34557 will allow you to back your trailer over soft ground or up a hill without your brakes surging.

Stock# 5291264
EZ-LOADER UFP replacement brake bleeder screw with rubber cap. Sold as each.

Stock# 5415050
UFP replacement brake bleeder screw. Sold as each.

Stock# 5415052
UFP replacement wear pad protects the inner slide and outer housing on model A-60 Hydraulic Brake Actuators.

Stock# 5415086
UFP Replacement Breakaway Cable Clip keeps the breakaway cable from being accidentally pulled. Fits A-60, A-75 and A-84 brake actuators.

Stock# 5415068
UFP zinc plated replacement break-away cable with s-hook and bracket for UFP Model A-60 hydraulic disc and drum brake actuators. Cable measures 17".

Stock# 5415085
UFP Shock Bushing for A-60, A-75 and A-84 brake actuators.

Stock# 5415066
UFP Retaining Snap Ring is used in all UFP brake actuators and fits the 3/4" main pins.

Stock# 5415067
UFP Replacement Top/Bottom Wear pad for A-60, A-75 and A-84 brake actuators. Thick version. Requires three per actuator. (Sold as each)

Stock# 5415065
UFP Replacement Side Wear pad for A-60, A-75 and A-84 brake actuators. Thin version. Requires 6 per actuator. (Sold as each)

Stock# 5419207
KARAVAN dealer lockout bracket will allow you to back your trailer over soft ground or up a hill without your brakes surging and was intended to be used with UFP brand actuators. This is intended for Dealer Lot use only.

Stock# 5415093
UFP zinc plated replacement break-away cable with s-hook and bracket for UFP Model A-75 and A-84 hydraulic disc and drum brake actuators. Cable measures 15".

Stock# 5415122
UFP 3.5k indexable spindle nut is for mounting torsion axle trailing arms to the torsion axle. To be used with bolt that is 4" x 5/8".

Stock# 5415124
UFP 5.2k - 7k Indexable Spindle Bolt is for mounting torsion axle trailing arms to the torsion axle. Bolt is 5-1/2" x 7/8".

Stock# 5415125
UFP 5.2k - 7k Indexable Spindle Nut is for mounting torsion axle trailing arms to the torsion axle. To be used with bolt that is 5-1/2" x 7/8".

Stock# 5415126
UFP 5.2k - 7k Indexable Spindle Washer is for mounting torsion axle trailing arms to the torsion axle. To be used with bolt that is 5-1/2" x 7/8".

Stock# 5415137
UFP Precision Tapered Roller Bearing Kits include: 2 bearings, 2 races. (Does NOT include Cotter Pin, Dust Cap or Grease Seal)

Stock# 5415138
UFP Precision Tapered Roller Bearing Kits include: 2 bearings, 2 races. (Does NOT include Cotter Pin, Dust Cap or Grease Seal)

Stock# 5415064
Metal body construction with Double-Lip rubber seal. For use with the Vault Lubrication System.
Seal I.D. = 1.68"    Seal O.D. = 2.56"

Stock# 5415001
 Metal body construction with Double-Lip rubber seal. For use with 1 3/8" (L68149) trailer wheel bearings
Seal I.D. = 1.68"    Seal O.D. = 2.33"

Stock# 5415059
Metal body construction with Double-Lip rubber seal. For use with 1-1/16" x 1-1/16" (L44649) trailer wheel bearings on UFP axles or axles that use stainless steel grease seal wear sleeves. Use Spindo Seal kits to use with other manufacturers axles that do not have wear sleeves. Sold in pairs.  Seal I.D. = 1.38"    Seal O.D. = 1.98"

Stock# 5415109
UFP Stainless Steel wear sleeve for the grease seal shoulder is designed for 2,200 lb. axles.

Stock# 5415009
UFP Stainless Steel wear sleeve for the grease seal shoulder is designed for 2,900 - 3,700 lb. axles.

Stock# 5415081
UFP Stainless Steel wear sleeve for the grease seal shoulder is designed for 5,200 lb. axles.

Stock# 5415103
UFP 3.5K S.S. Wear Ring O-Ring #32736.

Stock# 5415112
UFP 1.98" Oil Bath internal Gasket #07516.

Stock# 5415015
TRAILER BUDDY Stainless Steel wheel bearing protectors replace original equipment dust caps and allow you to easily add bearing grease to the wheel hub to maintain proper lubrication of bearings.

Stock# 5415063
UFP Vault Hybrid Oil Bath Bearing Protector #07502 fits 1.98" Hubs. This unit is only compatible with 3/4" or 13/16" castle nuts.

Stock# 5415092
UFP Super Lube Zinc Plated Steel Dust Cap can be used on most recreational trailer wheel hubs and drums. Designed for axle spindles with grease zerk fittings on the end. Rubber plug sold separately. Fits 2.328" I.D. hubs & drums.

Stock# 5415058
Vault Hybrid Oil Bath Bearing Protector #05800 fits 2.328" Hubs.

Stock# 5415151
Vault Hybrid Oil Bath Bearing Protector #05801U fits 2.441" Hubs.

Stock# 5415153
Vault Hybrid Oil Bath Bearing Protector #05802U fits 2.717" Hubs.

Stock# 5415025
UFP O-Ring for 1.980" Gold Series oil bearing protectors #32742 (Sold as each)

Stock# 5415023
UFP O-Ring for 2.328" Gold Series oil bearing protectors #32741 (Sold as each)

Stock# 5415152
UFP O-Ring for 2.441" Gold Series oil bearing protectors #32202U (Sold as each)

Stock# 5415154
UFP O-Ring for 2.717" Gold Series oil bearing protectors #32743U (Sold as each)

Stock# 5415026
UFP Stainless Steel Press in Cap for Trailer Buddy Bearing Protectors. This wheel bearing protector cap fits inside #07500U bearing protectors. (Sold as each)

Stock# 5415148
Fits 1.938", 1.968", 1.980", 2.047", and 2.080" diameter 'Trailer Buddy' brand grease caps, (1) pair.

Stock# 5415038
Fits 2.240", 2.328", 2.441", 2.562", and 2.717" diameter 'Trailer Buddy' brand grease caps, (1) pair.

Stock# 5415002
Zinc finish Grade 8 wheel stud: overall length 2", thread length 1", insert length 1/2", cap diameter 3/4". Knurl diameter 0.563"

Stock# 5415140
UFP 8" leaf spring straight equalizer bar is used in multi-axle suspensions which accommodate Double Eye style leaf springs. (1-3/4" spring width)   Dimensions A = 5-1/2" C,D = 9/16"

Stock# 5415084
UFP trailer spring equalizer bars are used in multi-axle suspensions which accommodate Double Eye style leaf springs. (1-3/4" spring width)   Dimensions A= 5-1/2" B=2"