Boat Trailer Roller Brackets & Hardware

Stock# 5256054
5" slot for vertical adjustment, 1/2" or 5/8" shaft, galvanized. Split keel roller brackets can be used with any width roller.

Stock# 5256055
5" long slots on 2" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.

Stock# 5256056
5" long slots on 3" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.

Stock# 5256057
5" long slots on 6" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.

Stock# 5256097
5" long slots on 8" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.

Stock# 5256058
5" long slots on 10" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.

Stock# 5212014
Galvanized pal nut secures 1/2" diameter boat trailer roller shaft to supporting bracket. Two required per shaft.

Stock# 5212024
Galvanized pal nut secures 5/8" diameter boat trailer roller shaft to supporting bracket. Two required per shaft.

Stock# 5256136
Zinc plated rolled steel construction. Package includes two 1/2" pal nuts. Boat trailer roller shaft for use with 3" long x 1/2" ID rollers.

Stock# 5256137
Zinc plated rolled steel construction.
Boat trailer roller shaft for use with 4" long x 1/2" ID rollers.

Stock# 5256138
Zinc plated rolled steel construction.
Boat trailer roller shaft for use with 5" long x 1/2" ID rollers.

Stock# 5256139
Zinc plated rolled steel construction.
Boat trailer roller shaft for use with 4" long x 5/8" ID rollers.

Stock# 5256140
Zinc plated rolled steel construction.
Boat trailer roller shaft for use with 5" long x 5/8" ID rollers.

Stock# 5256141
Zinc plated rolled steel construction.
Boat trailer roller shaft for use with 8" long x 5/8" ID rollers.

Stock# 5256142
Zinc plated rolled steel construction.
Boat trailer roller shaft for use with 10" long x 5/8" ID rollers.

Stock# 5256143
Zinc plated rolled steel construction.
Boat trailer roller shaft for use with 12" long x 5/8" ID rollers.

Stock# 5256144
Zinc plated rolled steel construction. Package includes two 5/8" pal nuts. Roller shaft for use with 12" long x 5/8" ID rollers.

Stock# 5256145
Zinc plated rolled steel construction. Package includes two 5/8" pal nuts. Boat trailer roller shaft for use with 18" long x 5/8" ID rollers.

Stock# 1621001
11/16" ID x 1-3/4" O.D. galvanized boat trailer wobble roller washer.

Stock# 1041010
LoadRite Hog Ring for old style (pre-2003) Black Rubber wobble roller assemblies. When compressed hog ring fits 1-1/8" O.D. roller arms.

Stock# 1041202
LoadRite 1-1/4" ID x 2-1/4" OD wobble roller washer for old style (pre-2003) Black Rubber wobble rollers.

Stock# 1041031
Includes: 2 washers- ( 5/8" I.D. x 1-1/2" O.D.) & 2 hog rings
LoadRite Part #1466.02

Stock# 1041133
Includes: 2 washers- (1-1/4" I.D. x 2-1/4" O.D.) & 2 hog rings
LoadRite Part #1466.03

Stock# 1041204
Replacement center bushing for old style Black Rubber LoadRite Wobble Rollers. 1-1/8" ID x 1-1/4" long. LoadRite Part #1002.00

Stock# 1041285
Replacement center bushing for old style Black Rubber LoadRite Wobble Rollers. 5/8" ID x 1-1/4" long. LoadRite Part # 1012.00

Stock# 5421001
Replacement molded PVC wobble roller bushing used on Venture boat trailers. Length: 2.625"

Stock# 1041006
Fits LoadRite wobble roller assemblies 2003 & newer trailers. 2-1/4" O.D. LoadRite Part # 2509.02

Stock# 5419033
Fits Karavan wobble roller assemblies. Measures 2.04" W x .95" H and has a .75" opening prior to being compressed.

Stock# 5419034
KARAVAN 7/8" I.D. x 2-1/2" O.D. zinc wobble roller retainer washer.

Stock# 1041004
Fits LoadRite 1-3/8" I.D. wobble rollers on 2003 & newer trailers.
LoadRite Part # 1002.51

Stock# 1041203
LoadRite 1-3/8" ID x 2-1/4" OD galvanized wobble roller washer fits 2003 & newer trailers. LoadRite Part #2505.906

Stock# 1041325
Fits LoadRite 1-3/8" I.D. wobble rollers on 2003 & newer trailers.
LoadRite Part # 1002.61

Stock# 1041173
1.69" long bearing pad is required for mounting LoadRite Wobble Roller assemblies to flat frame surface.
LoadRite Part #2021.01

Stock# 1041025
2-7/8" long bearing pad is required for mounting LoadRite Wobble Roller assemblies to flat frame surface.
LoadRite Part #2021.02

Stock# 1041032
4-3/4" long x 1-3/4" wide pivot bar for 2 and 4 wheel LoadRite Wobble Roller assemblies.
LoadRite Part #2022.02A

Stock# 5419046
3.00" long x 1.375" wide aluminum wobble roller pivot seat is used when mounting Karavan wobble roller assemblies to flat frame surfaces.

Stock# 5419045
6" long x 3" wide pivot bar support for Karavan wobble roller assemblies. Aluminum pivot bar bolts to bottom of wobble roller assembly and pivots on bearing pad.

Stock# 1041027
13-1/4" long aluminum wobble/track roller bar for LoadRite Dual-Roller wobble roller assemblies.
LoadRite Part #4030.01A

Stock# 5421035
13-1/2" long aluminum wobble/track roller shaft for Venture Dual-Roller wobble roller assemblies.  Use two bars to make a Left Hand or Right Hand dual wobble roller assembly.

Stock# 1041012
3/8" x 1-1/2" Wide x 2-1/8" Long cadmium plated u-bolt for LoadRite Dual-Roller wobble roller assemblies.

Stock# 1041034
3/8" x 1.31" Wide x 2-3/4" Long cadmium plated u-bolt for LoadRite Quad-Roller wobble roller assemblies

Stock# 1041035
1/2" x 1.78" Wide x 4-1/2" Long cadmium plated u-bolt for LoadRite wobble roller Pivot Bar assemblies.

Stock# 1041255
2" wide x 2" tall x 32" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.

Stock# 1041307
2" wide x 3" tall x 38.75" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.

Stock# 1041218
2" wide x 3" tall x 32" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.

Stock# 5419014
2" wide x 2" tall x 38" long hot dip galvanized roller pivot bar. Used to support wobble roller assemblies on Karavan boat trailers. KARAVAN Part #100-01208-GL

Stock# 5419013
2" wide x 3" tall x 38" long hot dip galvanized roller pivot bar. Used to support wobble roller assemblies on Karavan boat trailers. KARAVAN Part #100-00294-GL

Stock# 5421032
2" wide x 3" tall x 36" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on Venture boat trailers.

Stock# 5421029
Galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 2 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.

Stock# 5421030
Galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 3 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.

Stock# 5421031
Galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 4 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.

Stock# 1041256
Aluminum pivot bar bracket measures 2.82" high and has 5/8" holes. For use with 2" wide pivot bars on LoadRite Wobble Roller assemblies. LoadRite Part #2072.06A

Stock# 1041257
Aluminum pivot bar bracket measures 3.82" high and has 5/8" holes. For use with 2" wide pivot bars on LoadRite Wobble Roller assemblies. LoadRite Part #2072.03A

Stock# 1041231
2-hole aluminum slider strap. Holes are 2" on center. ( 1/4" x 3/4" x 2-3/4")

Stock# 5291040
EZ-LOADER hog ring secures boat trailer wobble rollers to arm and shaft assemblies. 1-1/2" O.D. before being compressed onto the roller arm.

Stock# 5291042
EZ-LOADER 5/8" I.D. x 1-1/2" O.D. wobble roller washer.

Stock# 5291039
EZ-LOADER 3/4" I.D. x 2-1/2" O.D. wobble roller aluminum washer.

Stock# 5291038
EZ-LOADER 1" I.D. x 2" O.D. wobble roller aluminum washer.

Stock# 5291137
EZ-LOADER 1-3/8" O.D. x 1/2" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.

Stock# 5291135
EZ-LOADER 2-5/8" O.D. x 1/2" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.

Stock# 5291136
EZ-LOADER 4" O.D. x 11/16" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.

Stock# 5291037
EZ-LOADER nylon wobble roller bushing fits the gray ribbed roller.
Dimensions:  1" I.D. x 1-1/4" O.D. x 1-1/8" long

Stock# 5291041
EZ-LOADER nylon wobble roller bushing fits the newer Quad Roller assemblies.
Dimensions:  3/4" I.D. x 1-5/16" O.D. x 1-1/8" long

Stock# 5291033
3" long x 1-3/8" wide poly slide wedge fits EZ-LOADER roller arm assemblies. Flat bottom and concave top.

Stock# 5291100
EZ-LOADER 1-3/4" long x 1" O.D. x 3/4" I.D. spacer bushing for quad roller assembly.

Stock# 5291103
EZ-LOADER 6-7/8" long x 2-3/4" wide galvanized wobble roller rocker plate. Plate rests on nylon glide (not included).

Stock# 5291105
EZ-LOADER Plated mounting strap and bolt kit attaches Quad-Roller assembly to pivot bar.

Stock# 5291003
EZ-LOADER Cast aluminum roller assembly arm for Left Front or Right Rear boat trailer locations.

Stock# 5291004
EZ-LOADER Cast aluminum roller assembly arm for Right Front or Left Rear boat trailer locations.

Stock# 5291133
EZ-LOADER 25-3/4" x 1/2" hex head roller assembly through bolt.

Stock# 5291134
EZ-LOADER 37-7/8" x 1/2" hex head roller assembly through bolt.

Stock# 5419002
High strength plated steel frame replacement roller bar for the 2-wheel roller assembly. Will accept rollers with a 1" I.D. roller shaft bushing. Karavan Part #100-00043-ZN

Stock# 5419003
High strength plated steel frame replacement roller bar for the quad-4 roller assembly. Will accept rollers with a 1" I.D. roller shaft bushing. Karavan Part #310-00701-ZN

Stock# 5419001
High strength black painted steel rear roller bracket. Measures 7" in overall length.
Karavan Part #300-00180-BL

Stock# 5419006
The universal steel roller bar bracket measures 1-1/2" x 1-1/2" and is commonly found on many Karavan trailers.
Karavan Part #100-00047-ZN

Stock# 5421033
Molded plastic roller blocks used on Venture boat trailers. Sold in pairs. One left and one right.

Stock# 5256101
Molded PVC wobble roller pivot saddle & insert. Mounting holes on 2-1/4" centers.

Stock# 5421034
Stainless steel roller block strap is commonly used on Venture roller trailers. Measures 3"

Stock# 5256102
Molded plastic slides fit between wobble roller shaft and pivot saddle. 7/8" wide x 3-1/4" long. (1) slide required per shaft.

Stock# 5256105
Hot Dipped Galvanized wobble roller shaft for mounting 1 pair of 3/4" I.D. rollers.

Stock# 5256103
Hot Dipped Galvanized Square U-Bolts for mounting wobble roller shaft/pivot saddle to trailer. 3/8-16 x 1.63" x 3.7" u-bolts.

Stock# 5257042
5.125" wide by 4.75" tall galvanized bracket allows for pivoting of bunk boards or roller assemblies. Upper or lower holes can be fitted with a bolt to act as a pivot stop.

Stock# 5291123
EZ-LOADER Galvanized steel bunk/roller mounting tray bolts to EZ-Loader support brackets to attach bunk or roller assemblies and set proper angle. Bracket measures 4" wide x 30" long.