Cargo Control - Tractor Trailer

Stock# 1559001
10,000 lb. rated capacity / 3,335 lb. Working Load Limit.
2-5/8" Flat-Hook on each end of this commercial grade strap. Uses #7030 wide handle Ratchet Buckle.

Stock# 1559001
Corner protectors from Pacific Cargo are designed to protect both strap and cargo from damage caused by the load. They are required by law whenever load conditions could cut or abrade the strap.

Stock# 1559002
10,000 lb. rated capacity / 3,335 lb. Working Load Limit
2" Wire J-Hook on each end of this commercial grade strap. Uses #7030 wide handle Ratchet Buckle.

Stock# 1559003
10,000 lb. rated capacity / 3,335 lb. Working Load Limit
2" Delta Ring on each end of this commercial grade strap. Uses #7030 wide handle Ratchet Buckle.

Stock# 1559004
10,000 lb. rated capacity / 3,335 lb. Working Load Limit
2" Twist Snap Hook on each end of this commercial grade strap. Uses #7030 wide handle Ratchet Buckle.

Stock# 1559005
10,000 lb. rated capacity / 3,335 lb. Working Load Limit
Sewn Loop on each end of this commercial grade strap. Uses #7030 wide handle Ratchet Buckle.

Stock# 1622025
3,335 lb. Working Load Limit. Ratchet straps are designed to handle most types of flatbed tie-down requirements and have hooks on both ends.

Stock# 1622026
3,335 lb. Working Load Limit. Ratchet straps are designed to handle most types of flatbed tie-down requirements and have hooks on both ends.

Stock# 1559042
15,000 lb. rated capacity / 5,000 lb. Working Load Limit
Flat Hook on one end of this commercial grade cargo control winch strap.

Stock# 1622039
3" x 5' Winch Strap with Roll Off Container Hook. Provides compliance with DOT standard 49 CFR section 393.134. This hook is suitable for connecting to the bottom rails of a standard roll-on/roll-off waste container.
Working Load Limit: 5,000 lbs.

Stock# 1559006
15,000 lb. rated capacity / 5,000 lb. Working Load Limit
Flat Hook on one end of this commercial grade cargo control winch strap.

Stock# 1559007
15,000 lb. rated capacity / 5,000 lb. Working Load Limit
Wire J-Hook on one end of this commercial grade cargo control winch strap.

Stock# 1559035
15,000 lb. rated capacity / 5,000 lb. Working Load Limit
Chain Anchor on one end of this commercial grade cargo control winch strap.

Stock# 1559008
15,000 lb. rated capacity / 5,000 lb. Working Load Limit
Sewn Loop on one end of this commercial grade cargo control winch strap.

Stock# 1622021
5,400 lb. Working Load Limit. Strap has a flat Hook on one end and is made from resin-coated polyester for minimum stretch and maximum wear resistance.

Stock# 1622022
5,400 lb. Working Load Limit. Strap has a flat Hook on one end and is made from resin-coated polyester for minimum stretch and maximum wear resistance.

Stock# 1622023
3,335 lb. Working Load Limit.  Strap has a flat Hook on one end and is made from "Rhino Web" a new, more durable and abrasion resistant webbing for cargo control tie-down straps.

Stock# 1622024
5,400 lb. Working Load Limit.  Strap has a flat Hook on one end and is made from "Rhino Web" a new, more durable and abrasion resistant webbing for cargo control tie-down straps.

Stock# 1559023
Black painted steel winch strap winder for 2", 3" and 4" wide cargo control straps.

Stock# 1622009
The Kwik Winder allows drivers to wind straps onto the mandrel of a winch in a fraction of the time it takes to do it by hand! This essential tool easily recoils straps, saves time and gets drivers back on the road quickly.

Stock# 1622010
The Strap Winder is steel constructed with zinc plating. It easily clips to trailer side rails, quickly wind 2" - 4" straps and can be conveniently disassembled for storage.

Stock# 1622001
Weld-On Winch designed to be permanently mounted to the trailer frame. For use with webbing straps up to 4" in width. 5,500 lb. WLL

Stock# 1622002
Storable Weld-On Winch is designed to be permanently mounted to the trailer frame and offers added capacity for storing up to 40' of webbing. For use with webbing straps up to 4" in width. 5,500 lb. WLL

Stock# 1622003
Sliding winches move easily in both directions for positioning in the track, but lock firmly in place when tension is applied to the webbing. All sliding winches can also be welded in place for fixed application. For use with webbing straps up to 4" in width. 5,500 lb. WLL

Stock# 1622004
Sliding winches move easily in both directions for positioning in the track, but lock firmly in place when tension is applied to the webbing and also offers added capacity for storing up to 40' of webbing. All sliding winches can also be welded in place for fixed application. For use with webbing straps up to 4" in width. 5,500 lb. WLL

Stock# 1622005
Double "L" Sliding winches move easily in both directions for positioning in the track, but lock firmly in place when tension is applied to the webbing. For use with webbing straps up to 4" in width. 5,500 lb. WLL

Stock# 1326135
Sliding Winch Track, 1/4" thick x 72" long. Holds 'Sliding Style Cargo Control Winch' for adjustable location heavy-duty load binding.

Stock# 1622006
Chrome Plated Ratchet Winch Bar is a revolutionary development to the standard winch bar, as it turns all winches into ratcheting winches and provides a safe, efficient and convenient way to tension and release winch straps.

Stock# 1622007
Chrome Plated Combination Ratchet Winch Bar is a revolutionary development to the standard winch bar, as it turns all winches into ratcheting winches and provides a safe, efficient and convenient way to tension and release winch straps.

Stock# 1622008
This essential part attaches the Ratchet Winch Bar to the winch cap to facilitate tensioning and to prevent it from slipping loose. Chrome Plated.

Stock# 1622011
Standard painted winch bar features a knurled, non-slip handle and a tapered, carbon-steel nose piece with slip resistant tip for secure operation. Measures 35" long.

Stock# 1622012
Combination winch bars feature a knurled, non-slip handle and a tapered, carbon-steel, slip resistant tip for secure operation. Also has a modified end for use in tightening chain lever binders. Measures 39.5" long.

Stock# 1622019
Grade 70 'truckers' chain with 4,700 lbs. Working Load Limit.
Transport Grade 70 Chain provides a high strength-to-weight ratio.

Stock# 1622020
Grade 70 'truckers' chain with 6,600 lbs. Working Load Limit.
Transport Grade 70 Chain provides a high strength-to-weight ratio.

Stock# 1559015
Lever style cargo control load binder for 5/16" - 3/8" Grade 70 chain. 5,400 lbs. Working Load Limit.

Stock# 1559016
Ratchet style cargo control load binder for 5/16" - 3/8" Grade 70 chain. 5,400 lbs. Working Load Limit.

Stock# 1559017
Ratchet style cargo control load binder for 3/8" - 1/2" Grade 70 chain. 9,200 lbs. Working Load Limit.

Stock# 1326139
3/8" Clevis Grab Hook is drop forged and heat treated. Common component of Truck & Trailer chain cargo control equipment.

Stock# 1326282
Black painted steel trailer bed chain tie down provides a floor flush anchor point with a 6600 lb working load limit.

Stock# 1622018
Coil Rack, also known as a coil chock or coil bunks, is used in conjunction with hardwood timbers to stabilize metal coils in the load securement process.

Stock# 1559053
Prevents damage to load and cargo control strap. Reduces strap chaffing by providing a smooth tie-down contact surface.

Stock# 1559025
Galvanized steel corner protector with Chain Groove. Helps prevent damage to load and cargo control equipment.
SUPPLIES LIMITED

Stock# 1559026
Galvanized steel corner protector can be used with 2", 3" or 4" wide straps. Helps prevent damage to load and cargo control strap.
SUPPLIES LIMITED

Stock# 1559027
Plastic tarp guard covers load corners and other sharp contact points. Helps prevent damage to load and cargo control tarp or cover.

Stock# 1622013
Corner protectors are designed to protect both strap and cargo from damage caused by the load. Plastic protectors feature a corner recess to protect cargo edges.

Stock# 1622014
12" corner protectors are designed to protect both strap and cargo from damage caused by the load. Plastic protectors feature a corner recess to protect cargo edges.

Stock# 1622032
One piece load lock jack bar is manufactured from 14 gauge, galvanized, square steel tubes with 4" square bolt-on pivoting rubber feet.

Stock# 1622043
Kinedyne roll-in cart locks are a positive securement system for roller cart applications. The unique design allows for easy installation and removal from E or A series track.   Adjusts:  24" - 33"   Load Limit: 800 lbs