Boat Trailer Bunks, Bunk Glide Pads and Carpet

Stock# 5212058
Carpeted 2" x 24" bunk supports front of Jon boat or other flat bottom boats. Adjusts from 5-1/2" to 8" above tongue. Brackets are hot dipped galvanized. Includes mounting hardware for 2" or 3" tongues.

Stock# 1041364
LOADRITE Jon boat bottom bow rest is designed to be mounted onto the tongue of the trailer. It is adjustable both front to back as well as the height, and designed to provide support below the bow area of flat bottom boats.

Stock# 5212179
CE SMITH 2' x 2" x 4" wood boards covered on all sides with deluxe black marine carpet. Bunks can be mounted flat or in an upright position. Replace worn bunks and renew trailer appearance with new marine grade carpeted bunk boards.

Stock# 5212018
CE SMITH 3' x 2" x 4" wood boards covered on all sides with deluxe black marine carpet. Bunks can be mounted flat or in an upright position. Replace worn bunks and renew trailer appearance with new marine grade carpeted bunk boards.

Stock# 5212019
4' x 2" x 4" wood boards covered on all sides with deluxe black marine carpet. Bunks can be mounted flat or in an upright position. Replace worn bunks and renew trailer appearance with new marine grade carpeted bunk boards.

Stock# 5212020
5' x 2" x 4" wood boards covered on all sides with deluxe black marine carpet. Bunks can be mounted flat or in an upright position. Replace worn bunks and renew trailer appearance with new marine grade carpeted bunk boards.

Stock# 5212022
6' x 2" x 4" wood boards covered on all sides with deluxe black marine carpet. Bunks can be mounted flat or in an upright position. Replace worn bunks and renew trailer appearance with new marine grade carpeted bunk boards.

Stock# 5212128
7' x 2" x 4" wood boards covered on all sides with deluxe black marine carpet. Bunks can be mounted flat or in an upright position. Replace worn bunks and renew trailer appearance with new marine grade carpeted bunk boards.

Stock# 5454061
SeaLion / TideWater pressure treated bunk board covered on all sides with deluxe marine carpet. Replace damaged or worn and renew your trailer appearance with these new marine grade carpeted bunk boards. (Sold as each).

Stock# 5454060
SeaLion / TideWater pressure treated vertical bunk board covered on all sides with deluxe marine carpet. Replace damaged or worn and renew your trailer appearance with these new marine grade carpeted bunk boards. (Sold as each).

Stock# 5454062
SeaLion / TideWater pressure treated bunk board covered on 3 sides with deluxe marine carpet. Replace damaged or worn and renew your trailer appearance with these new marine grade carpeted bunk boards. (Sold as each).

Stock# 5454063
SeaLion / TideWater pressure treated bunk board covered on all sides with deluxe marine carpet. Replace damaged or worn and renew your trailer appearance with these new marine grade carpeted bunk boards. (Sold as each). Due to the length of this item it is not able to be shipped and can only be purchased at our Store/Showroom in Newark, DE.

Stock# 5454064
SeaLion / TideWater pressure treated bunk board covered on all sides with deluxe marine carpet. Replace damaged or worn and renew your trailer appearance with these new marine grade carpeted bunk boards. (Sold as each). Due to the length of this item it is not able to be shipped and can only be purchased at our Store/Showroom in Newark, DE.
SUPPLIES LIMITED

Stock# 5212107CE
CE SMITH PWC dolly is made with a heavy duty galvanized tubular frame and has two 4' carpeted bunks that can be adjusted to fit PWC's, Jon boats or inflatables.

Stock# 5454059
SeaLion / TideWater bunk pivot bar assembly features a 2" x 6" x 55" bunk and 2" x 3" 48" galvanized support brackets with hinges.

Stock# 1041454
LOADRITE bunk pivot bar assembly features a 2" x 6" x 42" bunk, galvanized support brackets with pre-greased hinges and a galvanized 2" x 3" x 38-7/8" tube. This is commonly used on single axle LoadRite boat trailers. Attaching hardware sold separately.

Stock# 7102006
TRITON 5' Bunk Assembly with Mounted Brackets is ready to install.  Board is a 2" x 4" x 5' fully carpeted with Triton aluminum brackets already mounted on 38" centers.

Stock# 1041333
6' x 2" x 4" bunk board covered on all sides with deluxe marine carpet has mounting brackets pre-installed at 56". Replace damaged or worn LoadRite bunks and renew trailer appearance with new marine grade carpeted bunk board. (Sold as each)

Stock# 1041305
8' x 2" x 4" pine bunk board covered with deluxe marine carpet. This bunk board is made with non-treated lumber. (Sold as each)
Replace damaged or worn Loadrite bunks and renew trailer appearance with new marine grade carpeted bunk board.

Stock# 1041323
LOADRITE 8' x 2" x 6" non treated bunk board covered with deluxe marine carpet.
Replace damaged or worn Loadrite bunks and renew trailer appearance with new marine grade carpeted bunk board.  (Sold as each)

Stock# 5419283
KARAVAN adjustable bunk assembly has a 2" x 6" x 30" bunk mounted with galvanized brackets that allow for several adjustments. Mounting hardware sold separately.

Stock# 5428130MT
MAGIC TILT 3" x 6" x 7' pressure treated board covered with black marine carpet. Replace damaged or worn bunks and renew trailer appearance with new bunk boards. This bunk is a factory OEM Magic Tilt replacement bunk. Sold as each.

Stock# T5428133MT
MAGIC TILT 3" x 8" x 10' pressure treated board covered on all sides with black marine carpet. Replace damaged or worn bunks and renew trailer appearance with new bunk boards. This bunk is a factory OEM Magic Tilt replacement bunk.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# T5428134MT
MAGIC TILT 3" x 10" x 10' pressure treated board covered on all sides with black marine carpet. Replace damaged or worn bunks and renew trailer appearance with new cypress bunk boards. This bunk is a factory OEM Magic Tilt replacement bunk. Sold as each.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 5419281
Karavan Tri-Toon bunk assembly. Includes (2) 6' x 2" x 4" carpeted bunk boards with (2) mounting brackets pre-installed. Mounting hardware sold separately.
SUPPLIES LIMITED

Stock# 5421118
VENTURE Carpeted Bunk kit comes with all of the necessary hardware and brackets to attach the bunk boards to a trailer with 3" x 3" cross members. It features galvanized brackets and u-bolts and carpeted bunk boards.

Stock# 5421119
VENTURE Carpeted Bunk kit comes with all of the necessary hardware and brackets to attach the bunk boards to a trailer with 3" x 3" cross members. It features galvanized brackets and u-bolts and carpeted bunk boards.

Stock# 5421117
VENTURE Carpeted Bunk kit comes with all of the necessary hardware and brackets to attach the bunk boards to a trailer with 3" x 3" cross members. It features galvanized brackets and u-bolts and carpeted bunk boards.

Stock# 5428171
MAGIC TILT complete 6' bunk board kit comes with all of the galvanized hardware and two pre-wrapped 6' bunk boards for installation on most Magic Tilt brand boat trailers.

Stock# 1041410
LOADRITE target bunk kit is used to add a pair of bunks that attach to the front crossbar of a trailer. It is adjustable both front to back as well as the height, and designed to provide support below the bow area on 5-Starr and Load Rite AC21, AC23, and AC25 model boat trailers.

Stock# 5256188
4' long galvanized steel roller bunks mount to cross-member or bolster brackets. Features 4 sets of non-marking poly rollers per bunk.   Capacity: 1,500 lbs. per pair

Stock#1568085
4' long black painted steel steel roller bunks mount to cross-member or bolster brackets. Features 5 sets of non-marking poly rollers per bunk.

Stock#1568087
4' long galvanized steel steel roller bunks mount to cross-member or bolster brackets. Features 5 sets of 3 non-marking poly rollers per bunk.

Stock# 5256152
5' long galvanized steel roller bunks mount to cross-member or bolster brackets. Features 5 sets of non-marking poly rollers per bunk.  Capacity: 1,500 lbs. per pair

Stock#1568086
5' long black painted steel steel roller bunks mount to cross-member or bolster brackets. Features 6 sets of non-marking poly rollers per bunk.

Stock#1568088
5' long galvanized steel steel roller bunks mount to cross-member or bolster brackets. Features 6 sets of 3 non-marking poly rollers per bunk.

Stock# 1354009
Two Bunk-Ender Pads with a 90 degree lip (3" x 9") cover end of a 2" x 4" or 2" x 6" bunk. Bunk-Enders enable the boat to slide over bunk ends while protecting your bunks from wear and tear.

Stock# 1354021
Two White Bunk-Ender Pads with a 90 degree lip (3" x 9") cover end of a 2" x 4" bunk. Bunk-Enders enable the boat to slide over bunk ends while protecting your bunks from wear and tear.

Stock# 1354015
8 Pads (1.5" x 10") & stainless steel screws will cover a pair of 2" wide bunks up to 8' long. Add EZ-SLIDE pads to your trailer and launch or load your boat with ease.

Stock# 1354017
8 White Pads (1.5" x 10") & stainless steel screws will cover a pair of 2" wide bunks up to 8' long. Add EZ-SLIDE pads to your trailer and launch or load your boat with ease.

Stock# 1354016
4 Pads (3" x 10"), stainless steel screws & 2 bunk end pads will cover a pair of 2" x 4" bunks up to 6' long. Add EZ-SLIDE pads to your trailer and launch or load your boat with ease.

Stock# 1354018
4 White Pads (3" x 10"), stainless steel screws & 2 bunk end pads will cover a pair of 2" x 4" bunks up to 6' long. Add EZ-SLIDE pads to your trailer and launch or load your boat with ease.

Stock# 1354007
8 Pads (3" x 10"), stainless steel screws & 2 Bunk end pads will cover a pair of 2" x 4" bunks up to 10' long. Add EZ-SLIDE pads to your trailer and launch or load your boat with ease.

Stock# 1354019
8 White Pads (3" x 10"), stainless steel screws & 2 Bunk end pads will cover a pair of 2" x 4" bunks up to 10' long. Add EZ-SLIDE pads to your trailer and launch or load your boat with ease.

Stock# 1354008
10 Pads (5" x 10") & stainless steel screws will cover a pair of 2" x 6" bunks up to 10' long. Add EZ-SLIDE pads to your trailer and launch or load your boat with ease.

Stock# 1354020
10 White Pads (5" x 10") & stainless steel screws will cover a pair of 2" x 6" bunks up to 10' long. Add EZ-SLIDE pads to your trailer and launch or load your boat with ease.

Stock# 5256010
White self centering bunk glide on's with interlocking modular sections. Fits Two 2" x 6" x 8' Bunk Boards. Kits Can Be Combined For Longer Length Bunk Boards and are ideal for painted, fiberglass, or aluminum boats. Includes S.S. mounting screws.

Stock# 5256219
Black self centering bunk glide on's with interlocking modular sections. Fits Two 2" x 6" x 8' Bunk Boards. Kits Can Be Combined For Longer Length Bunk Boards and are ideal for painted, fiberglass, or aluminum boats. Includes S.S. mounting screws.

Stock# 5421038
VENTURE Plastic Poly Bunk Covers will fit 3" wide lumber. Its shipped in two 6' sections and must be pieced together at the time of installation. The cover can easily be stapled onto your already carpeted bunks with galvanized or stainless steel staples. Ideal for painted, fiberglass, or aluminum boats. (Covers one 12' bunk)

Stock# T5421049
Venture Plastic Poly and Carpeted Bunk Board measure 10' L x 8" H X 3" W. These bunk boards have a 6 degree bevel. Ideal for painted, fiberglass, or aluminum boats.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 5256003
White self centering bunk glide on’s with interlocking modular sections. Fits Two 2" x 4" x 8' Bunk Boards. Kits can be combined for longer length bunk boards and are ideal for painted, fiberglass, or aluminum boats. Easy to install. Includes 2 left and 2 right self centering glide-ons with rounded end caps to fit two 2" x 4" x 8' bunk boards. Includes stainless screws.

Stock# 5256333
Black self centering bunk glide on’s with interlocking modular sections. Fits Two 2" x 4" x 8' Bunk Boards. Kits Can Be Combined For Longer Length Bunk Boards and are ideal for painted, fiberglass, or aluminum boats. Easy to install. Includes 2 left and 2 right self centering glide-ons with rounded end caps to fit two 2" x 4" x 8' bunk boards. Includes stainless screws.

Stock# 1041331
LOADRITE finished edge black plastic bunk cover. Fits 2" x 6" bunk boards and measures 12" in length.
Includes (1) - 2" x 6" x 12" finished edge section for 2" x 6" bunk boards.

Stock# 1041329
LOADRITE finished edge black plastic bunk cover. Fits 2" x 6" bunk boards and measures 24" in length.
Includes 1- 2" x 6" x 24" finished edge section for 2" x 6" bunk boards.

Stock# 1041330
LOADRITE center section black plastic bunk cover. Fits 2" x 6" bunk boards and comes in a 36" length. Center section is best used with end pieces which are sold separately. Includes 1- 36" center section for 2" x 6" bunk boards.

Stock# 5291208
EZ-LOADER composite bunk covers fit over existing 4" wide carpeted bunks, 2 x 4's and aid the launching and loading of aluminum boats by providing a slippery surface for the boat to slide on. They are 18" long. One cover for every 2 linear feet of bunk. Sold as each.

Stock# 5291209
EZ-LOADER composite bunk covers fit over existing 6" wide carpeted bunks, 2 x 6's and aid the launching and loading of aluminum boats by providing a slippery surface for the boat to slide on. They are 18" long. One cover for every 2 linear feet of bunk. Sold as each.

Stock# 5339043
Caliber black bunk wrap kit is designed for 2" x 4" bunks. The Kit comes with one 4" x 16' roll of bunk wrap, four end caps, and stainless steel mounting hardware.

Stock# 5339045
Caliber gray bunk wrap kit is designed for 2" x 6" bunks. The Kit comes with one 16' roll of bunk wrap, four end caps, and stainless steel mounting hardware.

Stock# 5229234
ATTWOOD 8" wide by 12' long roll of durable weather-resistant polypropylene marine carpet material. Carpet is easy to cut and custom fit to your application. Attach boat trailer bunk carpet with staples.

Stock# 5229235
ATTWOOD 12" wide by 12' long roll of durable weather-resistant polypropylene marine carpet material. Carpet is easy to cut and custom fit to your application. Attach boat trailer bunk carpet with staples.

Stock# 5212131
CE SMITH 11" wide by 12' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 2" x 6" or 3" x 8" bunks with staples.

Stock# 5212130
CE SMITH 11" wide by 12' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 2" x 6" or 3" x 8" bunks with staples.

Stock# 5212111
CE SMITH 18" wide by 18' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 3" x 8" or 4" x 8" bunks with staples.

Stock# 5212129
18" wide by 18' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 3" x 8" or 4" x 8" bunks with staples.

Stock# 5212135
CE SMITH 11" wide by 150' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 2" x 6" or 3" x 8" bunks with staples.

Stock# 5212169
CE SMITH 11" wide by 12' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. Attach boat trailer bunk carpet to 2" x 6" or 3" x 8" bunks with staples.

Stock# 5212132
CE SMITH 18" wide by 150' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 3" x 8" or 4" x 8" bunks with staples.

Stock# 5212194
CE SMITH replacement black rubber roller for use with #27700 and #27710 roller bunk assemblies.
Dimensions: 1/2" shaft, 1-7/8" width, 2-1/2" height

Stock# 5212195
CE SMITH replacement black rubber end cap for use with #27700 and #27710 roller bunk assemblies.
Dimensions: 1/2" shaft, 2-1/4" width, 2-1/2" height

Stock# 5339053
Allows you to unload and load your boat in shallower water. Fast and simple application for both horizontal and vertical bunks. Made from a unique blend of anti-friction compounds. Comes in 1 pint (16 fl. oz.) easy-to-use spray bottle and is applied directly to carpeted bunks.