Boat Trailer Bow Guides

Stock# 5256221
Ideal for jon boats, bass boats and personal watercraft. The 20" tall guide posts are hot dip galvanized for long life with covers made from high impact non-marking molded PVC.

Stock# 5212208
CE SMITH smooth rolling guides assist in centering the boat onto the trailer. Ideal for retrieving your boat on shallow ramps where the trailer is not far into the water, when you are alone, or have a crosswind or current pushing the boat. Uprights with rollers come fully assembled, ready for installation.

Stock# 5212200
CE SMITH 40" tall Angled Post Guide-Ons allow you to see the location of your trailer when it's under water. They attach with the provided u-bolts to the frame of your trailer.

Stock# 5256249
TIEDOWN 48" heavy duty Guide On's are made of non-maring PVC tubing that is braced with 15" of galvanized square tubing at a 13° angle. A bright orange end cap sits on top of the PVC tubing, giving a brighter target when loading the boat.

Stock# 5256337
TIEDOWN 48" heavy duty Guide On's are made of non-maring PVC tubing that is braced with 15" of galvanized square tubing at a 90° angle. A bright orange end cap sits on top of the PVC tubing, giving a brighter target when loading the boat.

Stock# 5212177
CE SMITH 40" tall Post Guide-Ons allow you to see the location of your trailer when it's under water. They attach with the provided u-bolts to the frame of your trailer.

Stock# 5212178
CE SMITH 40" tall Post Guide-Ons allow you to see the location of your trailer when it's under water. They attach with the provided u-bolts to the frame of your trailer.

Stock# 5212201
CE SMITH 40" LED Post Guide-Ons allow you to see the location of your trailer when it's under water. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night.

Stock# 5212202
CE SMITH 60" tall Post Guide-Ons allow you to see the location of your trailer when it's under water. They attach with the provided u-bolts to the frame of your trailer.

Stock# 5212203
CE SMITH 60" tall Post Guide-Ons allow you to see the location of your trailer when it's under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam.

Stock# 5212204
CE SMITH 65" tall Post Guide-Ons allow you to see the location of your trailer when it's under water. This set features a heavy duty 2 piece elbow bracket that attaches with the provided u-bolts to the frame of your trailer.

Stock# 5212205
CE SMITH 65" tall Aluminum Post Guide-Ons allow you to see the location of your trailer when it's under water. This set features a heavy duty 2 piece elbow bracket that attaches with the provided u-bolts to the frame of your trailer.

Stock# 5256336
TIEDOWN 60" heavy duty Guide On's are made of non-maring PVC tubing that is braced with 15" of galvanized square tubing at a 13° angle. A bright orange end cap sits on top of the PVC tubing, giving a brighter target when loading the boat.

Stock# 5256338
TIEDOWN 60" heavy duty Guide On's are made of non-maring PVC tubing that is braced with 15" of galvanized square tubing at a 90° angle. A bright orange end cap sits on top of the PVC tubing, giving a brighter target when loading the boat.

Stock# 5256366
The floating guide post features the ability to adjust the overall height from 48” to 60”. The metal tube is made from heavy-duty 14 gauge steel, pre-galvanized, and powder coated for a durable finish. It features a 30 degree slant through the bottom 18” to allow for varying hull shapes. The black PVC pipe is non-marring and designed to hide the floating slot and holes for a clean look. Mounts to 3" and 4" tall trailer frames. All mounting hardware included.

Stock# 5020303
FULTON kit includes one pair of ALL PVC guide posts and mounting hardware.
16" of total width adjustment, guide post height of 44"
SUPPLIES LIMITED

Stock# 5020076
FULTON 50" PVC Boat Trailer Bow Guides (1-pair) provide 10" of width adjustment on each side. Help center your boat on the trailer quick and easy with self-centering boat guides. Marine grade PVC up rights help prevent damage to your boat. High strength mounting brackets attach firmly above or below the trailer frame for maximum mounting flexibility.
SUPPLIES LIMITED

Stock# 5212101
Kit includes one pair of lighted guide posts and mounting hardware.
19" of width adjustment on each side, guide post height of 60"

Stock# 5212126
CE SMITH extra tall Post Guide-Ons allow you to see the location of your trailer when it's under water. They attach with the provided u-bolts to the frame of your trailer.

Stock# 5212125
CE SMITH extra tall Post Guide-Ons allow you to see the location of your trailer when it's under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam.  Fits on I-beams up to 4" wide with provided hardware.

Stock# 5257115
Tie Down Engineering trailer side guide bracket measures 24" high and is made from heavy duty 3/8" hot dipped galvanized steel. These brackets are 2" wide. Guide on your boat safely in high winds or strong currents. Sold as each. Hardware not included.

Stock# 1041380
LOADRITE Galvanized Side Guide Bracket is at a 90° and measures 1-1/2" x 1-1/2" square. The long side is 33" and the shorter side is 26" and it is used on 5 Starr trailers to support the guides.

Stock# 1041381
LOADRITE galvanized side guide brackets are formed at a 105° and measure 1-1/2" x 1-1/2" square each. The long side is 33" and the shorter side is 26" and it is used on 5-Starr trailers to support the guides.

Stock# 5256360
The floating guide post features the ability to adjust the overall height from 48” to 60”. The metal tube is made from heavy-duty 14 gauge steel, pre-galvanized, and powder coated for a durable finish. It features a 30 degree slant through the bottom 18” to allow for varying hull shapes. The PVC pipe is non-marring and designed to hide the floating slot and holes for a clean look. Mounts to 3" and 4" tall trailer frames. All mounting hardware included.

Stock# 5256334
Mount these 13" rubber rollers on top or beneath frame for added adjustment. Hot dip galvanized mounts adjust for widths to 13" on each side. Fits frame up to 4". Hardware included. Kit includes one pair of guide posts and hot dip galvanized mounting hardware.

Stock# 5256213
Guide on your boat safely in high winds or strong currents. Soft poly vinyl cradles your boat protecting it from scratches and dings. Hull Sav'r 22" boat guides are designed to absorb impact of the hull and protect the trailers finish.

Stock# 5020130
Boat guides help you guide and center your boat onto your trailer. Kit includes one pair of guide posts and mounting hardware. Total width adjustment of up to 15", guide post height of 18". Adjustable to provide optimum fit to any hull design.
SUPPLIES LIMITED

Stock# 5256011
Kit includes one pair of guide posts and mounting hardware.  Features 8" of width adjustment on each side, guide post height of 19", galvanized steel construction.

Stock# 5419286
KARAVAN roller guide-on kit comes with 1 black painted roller guide on assembly, 1 flat roller with endcap, and roller shaft hardware. Mounting hardware sold separately. Sold as each.

Stock# 5419287
KARAVAN adjustable roller guide on kit comes with one galvanized 16.14" tall roller guide on assembly, one flat roller with endcap, and roller shaft hardware. Mounting hardware sold separately. Sold as each.

Stock# 5419289
KARAVAN adjustable roller guide on kit comes with one galvanized 12.65" tall roller guide on assembly, one flat roller with endcap, and roller shaft hardware. Mounting hardware sold separately. Sold as each.

Stock# 1041496
LOADRITE 5-Starr guide post kit uses 1-1/2" x 1-1/2" galvanized tubing with 107° angle and includes one pair of guide posts and hardware.  15" of width adjustment on each side, guide post height of 60".  This is a replacement kit for LoadRite trailers that feature 1.5" square hole in the middle of the I-Beam and is NOT intended for new applications.

Stock# 1041403
LOADRITE guide post kit uses 1-1/2" x 1-1/2" galvanized tubing with 105° angle and includes one pair of guide posts and hardware.  15" of width adjustment on each side, guide post height of 60".  This is a replacement kit for LoadRite trailers that feature 1.5" square hole in the middle of the I-Beam and is NOT intended for new applications.

Stock# 1041416
LOADRITE kit includes one pair of guide posts and hardware for 5" tall frames.
15" of width adjustment on each side, guide post height of 60".

Stock# 5212046
Kit includes one pair of carpeted bunk boards and hardware.
13" of width adjustment on each side, guide height of 21".

Stock# 5212045
Kit includes one pair of carpeted bunk boards and hardware to fit trailer frames up to 3" wide and 4-1/4" high. Allows 13" of width adjustment on each side, with guide height of 21".

Stock# 5421087
VENTURE Pontoon Bunk Supports are ideal for bunk style pontoon boat trailers with box frame 4" wide.
SUPPLIES LIMITED

Stock# 5419296
KARAVAN pontoon guide-on kit comes with (1) galvanized guide on assembly and (2) U-bolts with nuts to fit a 2" wide frame. Sold as each.

Stock# 5419284
KARAVAN Pontoon guide-on assembly measures 17.68" from mounting plate to top. Mounting sold separately. Sold as each.

Stock# 5212106
CE SMITH pontoon boat guide on's are made of 1-1/2 galvanized tubing and 2" PVC pipes that slide onto the full-length metal post upright giving it superior strength. Fits over 3" x 4-1/2" cross members.

Stock# 5419267
KARAVAN pontoon guide-on weldment measures 16.18" from the mounting plate to the top and has a black textured finish. Mounting hardware not included. Sold as each.

Stock# 5419268
KARAVAN pontoon Guide-On Weldment measures 16.18" from the mounting plate to the top and has a galvanized finish. Mounting hardware not included. Sold as each.
SUPPLIES LIMITED

Stock# 7109029
HOOSIER Pontoon Boat Trailer Guide-On Kit is ideal for bunk style pontoon boat trailer with box frame up to 2" wide x 3" tall. This kit includes not only the 4 complete guides ready to bolt on but also all of the mounting hardware to mount them.

Stock# 5256339
Bright orange end caps on these PVC guides give you a brighter target when loading your pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel tubing and covered by 2" PVC pipe. Hot dip galvanized guide posts extend fully into the PVC tube for additional strength. Mounts to trailer cross members up to 2" wide by 2" high Has a 24” - 36” overall height  All mounting hardware included.
SUPPLIES LIMITED

Stock# 5421112
Venture Pontoon Winch Mount is made from 2" x 2-3/4" galvanized tubing and features twin bunk supports.

Stock# 5212151
Ideal for bunk style pontoon boat trailer with box, channel, or I-beam frames up to 3" wide x 4-1/4" tall. Pontoon glides easily past the carpeted bunk boards guiding the pontoon boat onto the trailer. Height is adjustable and is set during install between 24" and 36" above trailer frame.

Stock# 5212152
Ideal for bunk style pontoon boat trailer with box, channel, or I-beam frames up to 3" wide x 4-1/4" tall. Minimum friction rolling action easily guide pontoon boat onto trailer. Height is 25" above trailer frame. Mount with roller bunks 2-3" from pontoons on a trailer frame cross member.

Stock# 5442004
CONTINENTAL PVC covered galvanized steel front centering bow guide includes a non-marking V-pad. It measures 6" high X 39" wide and fits 3" tube only. All mounting hardware included.

Stock# 5442005
CONTINENTAL PVC covered galvanized steel front centering bow guide includes a non-marking V-pad. It measures 9" high X 39" wide and fits 3" tube only. All mounting hardware included.

Stock# 5428079
MAGIC TILT factory O.E.M. Bow Rest Guide measures 40" wide and 20" to the center of the keel bump pad. High strength galvanized steel frame assembly provides optimum support for most trailerable boats. Length of vertical mounting post is 6-3/4" x 2" x 2"

Stock# 5428106
MAGIC TILT galvanized side guide wide board bracket  measures 21" L x  2" W and is made from heavy duty hot dipped galvanized steel. Sold as each. Hardware not included.

Stock# 5428107
MAGIC TILT galvanized side guide backing plate is used to mount the side guide board brackets. Can be used with the narrow (PT2170) or wide (PT2180) brackets. Sold as each. Hardware not included.

Stock# 5428105
MAGIC TILT galvanized side guide narrow board bracket measures 19" L x 2" W and is made from heavy duty hot dipped galvanized steel. Sold as each. Hardware not included.

Stock# 5428070
MAGIC TILT bow guide channel bracket allows you to attach a post vertically or horizontally to your trailer frame. Mounting Centers are 3-1/2" vertical and 4-1/4" horizontal. Hardware not included.

Stock# 5257118
TIEDOWN Bow Guide Channel Bracket allows you to attach a 1-1/2" square post vertically or horizontally to your trailer frame. Measures 5" x 5" and is made with 7 gauge galvanized steel. Hardware not included.

Stock# 1041382
LOADRITE Galvanized Side Guide Bracket is designed for use with the 105° 1-1/2" x 1-1/2" square side guide on 5 Starr trailers.

Stock# 5212170
CE SMITH replacement U-Bolt Kit for Roller, Post, Pontoon, and Bunk Board Guide-Ons. 3/8"x16 u-bolts will mount to frames up to 3" wide x 5-1/4" high. Includes (4) u-bolts per kit, two formed and two straight, enough to mount 2 posts.

Stock# 5212154
CE Smith replacement U-Bolt Kit for Roller, Post, Pontoon, and Bunk Board Guide-Ons. 3/8"x16 u-bolts will mount to frames up to 3" wide x 4" high. Includes (2) u-bolts per kit, one formed and one straight, enough to mount one post.

Stock# 5212198
CE SMITH galvanized 11-gauge steel boat bow guide replacement bracket for mounting 1-1/2" square tube guide-ons.
Dimensions: Width - 3.85"  Length - 4.63"

Stock# 5212104
CE SMITH I-BEAM CLAMP kit allows you to install Ship Shape Boat Guides on I-Beam trailers, even large Aluminum Trailers. Simple to install and can be fitted to the top or bottom of an I-Beam. Made with Hot dipped Galvanized steel, the kit includes: nuts, bolts and washers to make two complete clamps.

Stock# 5256273
The Bow Guide Channel Bracket 1/2" flange nut is designed to come through from the inside of the hexagonal holes down the center of the bow guide bracket.  A 1/2" bolt (not included) can be used to screw through the nut into the post creating tension and keeping it in place. Hex Head is 3/4" across.

Stock# 5421086
VENTURE factory OEM crossmember bow guides are used to protect the front of the boat from making contact with the cross member. These are a direct factory replacement and they feature marine grade carpet, treated wood, and attaching hardware. Sold as each.

Stock# 5442006
Replacement white poly pad for the CONTINENTAL front centering bow guide. Measures 11" long x 4" wide.
(Sold as each)

Stock# 5212081
Galvanized bracket bolts to PVC Boat Guides for mounting tail lights up and out of water. One bracket per package.

Stock# 5212105
One piece lamps fit easily on top of your existing 2" PVC post guide-ons. Amber light faces front, red faces rear. Includes two sealed waterproof one piece LED lamps, each with 8' of wire and all necessary electrical connectors and post locking bolts.

Stock# 1331054
'The Plank' is a boat trailer walkway that sits on the tongue for easier launching and loading of the boat. The 30" long x 9.5" wide non-corrosive plastic walkway, fits on 2" & 3" wide and up to 4" tall tongues.

Stock# 5212209
The Trailer Tongue Step Pad makes accessing your boat easy, providing a stable and steady place to anchor your feet. It can be mounted anywhere that is suitable on trailer tongues or side rails.

Stock# 5212206
CE SMITH Replacement PVC Guide-On Caps, 1 Pair.

Stock# 5212207
CE SMITH PVC Angled Post Guide-Ons allow you to see the location of your trailer when it's under water. This Extension Post Guide-On kit pairs nicely with CE Smith Bunk Board Guide-Ons, coupling the centering support and the added visuals to make trailering easy.