Hydraulic Trailer Drum Brake Repair Parts

Stock# 5415146
UFP A-75 series replacement bolt on outer member slide assembly is designed to work with the A-60, A-75, and XR-84 hydraulic brake actuators. Zinc Plated for Maximum Corrosion Resistance. Fits on the end of a 3" wide trailer tongue.

Stock# 5415088
UFP A-75 series replacement bolt on outer member slide assembly is designed to work with the A-60, A-75,and XR-84 hydraulic brake actuators. Zinc Plated for Maximum Corrosion Resistance.

Stock# 5415018
UFP Drum Brake Master Cylinder is compatible with the following hydraulic drum brake actuators: A-60, A-70, A-75, A-84 & A-160. It features an all aluminum design.

Stock# 1651003
DEMCO Drum Master Cylinder replacement kit with cap and mounting hardware. This master cylinder kit is used in all Drum brake actuators from Demco.

Stock# 1651004
DEMCO Model DA66B Disc Master Cylinder replacement kit with cap and mounting hardware. This master cylinder is used in all Disc brake actuators from Demco.

Stock# 1651008
DEMCO Disc Master Cylinder replacement kit with bypass solenoid, cap and mounting hardware. This master cylinder can be used in all Disc brake actuators from Demco.
SUPPLIES LIMITED

Stock# 1651009
DEMCO Inline Electric Reversing Solenoid is an inline solenoid that mounts to the back of a master cylinder to shut off pressure to the brakes for reversing.

Stock# 1651010
DEMCO Electric Reversing/Bypass Solenoid is a solenoid that mounts to the back of a master cylinder to shut off pressure to the brakes as well as run fluid through a secondary port back into the master cylinder

Stock# 5237163
Titan Master Cylinder Push Rod for the Model 6 hydraulic brake actuators.

Stock# 1651013
DEMCO DA91 Damper Shock is a direct replacement shock for the Demco model DA91 actuator both disc and drum.

Stock# 1651012
DEMCO DA91 Push Rod Assembly is a direct replacement push rod for the Demco model DA91 actuator both disc and drum.

Stock# 1651017
DEMCO DA10 Push Rod Assembly is a direct replacement push rod for the Demco model DA10 actuator both disc and drum.

Stock# 1651011
DEMCO Master Cylinder replacement cap is a direct replacement for all current master cylinders by Demco.

Stock# 5415040
UFP zinc plated replacement latch kit for UFP Model A-60 hydraulic brake actuators.

Stock# 7125257
TieDown by Dexter 10" & 12" UNI-SERVO BRAKES - Right and Left hand aluminum wheel cylinder kit comes with bleeders, mounting bolts with lock washers and steel plungers.

Stock# 5237164
TITAN 10" & 12" UNI-SERVO BRAKES - wheel cylinder push rod.

Stock# 5237103
TITAN 10" & 12" UNI-SERVO BRAKES - Right hand wheel cylinder assembly

Stock# 5237104
TITAN 10" & 12" UNI-SERVO BRAKES - Left hand wheel cylinder assembly.

Stock# 7125179
Complete drum brake master cylinder replacement kit includes: Aluminum Master Cylinder, Push Rods, Breakaway Spring, Gasket, Baffle, Rollers, Pins and cap.
Note: For use with TIEDOWN ENGINEERING models 66, 70 and 80 (Drum Brakes Only)

Stock# 7125181
Complete drum brake master cylinder replacement kit includes: Aluminum Master Cylinder, Push Rods, Breakaway Spring, Gasket, Baffle, Rollers, Pins and Cap.
Note: For use with TIEDOWN ENGINEERING model LP70 Button Latch Drum Brake Actuators (Drum Brakes Only)

Stock# 5237118
TITAN replacement master cylinder left handed bracket for Titan/Dico Model 10 / 20 hydraulic brake actuators.

Stock# 5237105
TITAN MODEL 60 ACTUATOR - Drum Brake Master Cylinder replacement kit.
Note: Also replaces the Model 60Z Drum Brake Master Cylinder.

Stock# 5237024
TITAN MODEL 60 ACTUATOR - Disc Brake Master cylinder replacement kit.

Stock# 7125045
TIE DOWN ENGINEERING replacement safety pin with lanyard fits the model 66, 70 and 80 actuators.

Stock# 7125083
TIE DOWN ENGINEERING replacement breakaway cable assembly with button stop fits the model 66, 70, and 80.

Stock# 5237008
TITAN break-away assembly includes cable w/pin, cover and s-hook for Titan/Dico Model 60 hydraulic brake actuator.

Stock# 7125093
TIEDOWN ENGINEERING model 66 replacement master cylinder cap with gasket. Also fits models 70 & 80. Threads are 1.235" o.d.

Stock# 7125122
TIIEDOWN ENGINEERING model 660E replacement master cylinder cap with gasket and internal bladder. Also fits models 750E & 850E. Threads are 1.98" o.d.

Stock# 5237108
TITAN MODEL 60 ACTUATOR - replacement break fluid reservoir cap with gasket.

Stock# 5237009
TITAN replacement shock absorber for Titan/Dico Model 60 hydraulic brake actuator.

Stock# 5237010
TITAN replacement push rod assembly for Titan/Dico Model 60 hydraulic brake actuator.

Stock# 5237011
TITAN wheel-lock coupler repair kit for Titan/Dico Model 60 Multi-Fit actuator.

Stock# 5237004
TITAN MODEL 6 ACTUATOR - Master cylinder replacement kit with cap.

Stock# 5237125
TITAN MODEL 6 ACTUATOR - Master cylinder replacement kit with cap.

Stock# 5237022
TITAN replacement master cylinder filler cap for Titan/Dico Model 6 hydraulic brake actuator.

Stock# 5237015
TITAN replacement damper shock for Titan/Dico Model 6 and 10 hydraulic brake actuator.

Stock# 5237162
Replacement damper shock for Titan/Dico Model 20 hydraulic brake actuator. Sold as each.

Stock# 5237005
TITAN MODEL 10 / 20 ACTUATOR - Master cylinder replacement kit with cap.

Stock# 5237025
TITAN MODEL 10 / 20 ACTUATOR - Disc Brake Master cylinder replacement kit with filler cap and mounting bracket.
SUPPLIES LIMITED

Stock# 5237119
TITAN replacement master cylinder right handed bracket for Titan/Dico Model 10 / 20 hydraulic brake actuators.

Stock# 5237013
TITAN replacement master cylinder filler cap for Titan/Dico Model 10 / 20 hydraulic brake actuators.

Stock# 5237040
TITAN replacement master cylinder cover for Titan/Dico Model 10 / 20 hydraulic brake actuator.

Stock# 5237032
2-5/16" Adjustable Ball Coupler for TITAN Model 10 Leveler Channel hydraulic trailer brake actuator. 14,000 lb capacity

Stock# 5237031
3" Adjustable Lunette Eye for TITAN Model 20 Leveler Channel hydraulic trailer brake actuator.

Stock# 5237033
Adjustable 1" thick clevis hitch for TITAN Model 20 Leveler Channel hydraulic trailer brake actuator.   20,000 lbs. Capacity

Stock# 5331363
Adjuster screw and spring fits Dexter 10 x 1-1/2", 10 x 2-1/4" hydraulic and electric, and 12 x 2" electric brake assemblies.

Stock# 5331365
Fits Dexter 10" x 2-1/4" free backing hydraulic brake assemblies.

Stock# 5331379DA
Fits Dexter 12-1/4" forward self adjusting hydraulic brake assemblies manufactured after 02/97.

Stock# 5331331
Fits Dexter 12-1/4 x 3-3/8", 12-1/4 x 4" and 12-1/4 x 5" brakes with 1-1/4" diameter cylinder (9K-12K).

Stock# 5331313
DEXTER brake backing plate mounting bolt. 7/16" x .81"-20 thread.
Note: 7/16" Press in brake stud for 10" electric brake assemblies.

Stock# 5331178
Dexter brake mounting bolt attaches brake backing plates to axle brake flanges.
Note: 3/8" Press in brake stud for 12" x 2" electric brake assemblies.  Dexter Part #007-112-00

Stock# 5331197
DEXTER brake mounting bolt attaches brake backing plates to axle brake flanges.
Note: 1/2" Press in brake stud for 12-1/4" x 2-1/2" electric brake assemblies.

Stock# 5331144
Dexter brake mounting bolt attaches brake backing plates to axle brake flanges.   Dexter Part #007-116-00
Note: 7/16" bolts will not work with the 12" x 2" electric brake assemblies.

Stock# 5331256
DEXTER Drum/Hub mounting bolt. Used to attach 10k, 12k, and 15K hubs and drums together.  1-3/4" Long x 1/2" -13 UNC.  (4-Pack)

Stock# 5331255
DEXTER K71-355-00 Drum Mounting Screws fit  9K and 10K Dexter GD drums. 1-1/2" Long x 1/2" - 13 UNC.

Stock# 5331424
DEXTER brake rotor mounting stud. 1/2" - 13 UNC hub thread, 1/2" - 20 UNF nut thread.

Stock# 5331179
Dexter brake backing plate mounting nut/washer. Used to attach electric or hydraulic brake baking plates to axle brake flange. 3/8"- 24 thread.   Dexter Part #006-193-00

Stock# 5331145
DEXTER brake mounting nut is used to attache brake backing plates to axle brake flanges.

Stock# 5331190
Dexter brake mounting nut is used to attache brake backing plates to axle brake flanges.

Stock# 7155039
TPS brake mounting nut is used to attach brake backing plates to axle brake flanges.

Stock# 7155037
TPS brake mounting nut is used to attach brake backing plates to axle brake flanges.

Stock# 5331193
Dexter brake mounting lock washer is used to attache brake backing plates to axle brake flanges.

Stock# 7155040
TPS brake mounting lock washer is used to attach brake backing plates to axle brake flanges.

Stock# 7155038
TPS brake mounting lock washer is used to attach brake backing plates to axle brake flanges.

Stock# 5331194
Dexter 12-1/4" x 3-3/8" brake dust shields (8k-10k) keeps road debris and the elements off the brake assembly to improve the life of your brakes.

Stock# 5331195
DEXTER 12-1/4" x 4" brake dust shields (10k) keeps road debris and the elements off the brake assembly to improve the life of your brakes.

Stock# 5331196
DEXTER 12-1/4" x 5" brake dust shields (12k-15k) keeps road debris and the element off the brake assembly to improve the life of your brakes.

Stock# 5331388
This armature plate is used to convert SKU: 5331373 (DEXTER Drum 10K, 8-6.50, 5/8"-18 Studs #K568704, K10788), SKU: 5331374 (DEXTER Drum 10KGD, 8-6.50, 5/8"-18 Studs #K568270), SKU: 5331371 (DEXTER Drum 12K, 8-6.50, 5/8"-18 Studs #A568260), and SKU: 5331372 (DEXTER Drum 12K, 8-6.50, 5/8"-18 Studs #A090871) for use with electric brakes.

Stock# 5331189
DEXTER Clamp Ring for Dexter 9k and 10k hubs with 8 on 6.5 with 5/8" studs.

Stock# 5250039
CRC Synthetic Brake and Caliper Grease is a high temperature grease to be uses where there is metal to metal points of contact. It has a working temp pf -40° up to 400°F with the ability to work intermittently up to 600°F (drop point).

Stock# 1536303-ORMD
B'LASTER® PB penetrating catalyst is a powerful and concentrated co-polymer penetrant that breaks loose surface tension rust and corrosion. The capillary action allows PB to "pull" itself uphill and into the tightest cavities to attack rust from all angles.
NOTE: SHIPS BY GROUND SERVICE ONLY

Stock# 5250004-ORMD
The original brake parts cleaner. Formulated to quickly & effectively remove grease, brake dust, brake fluids, oils, & other contaminants from brake parts, lining, pads.
NOTE: SHIPS BY GROUND SERVICE ONLY // NOT FOR USE IN CALIFORNIA or NEW JERSEY

Stock# 5463065-ORMD
Lucas Non-Chlorinated Brake Parts Cleaner is manufactured with the highest quality components to provide excellent performance without leaving any residue. It effectively removes brake fluid, grease, brake dust, and other contaminants from brake linings, pads, cylinders, springs and drums. Professional strength and powerful spray pattern improves performance of the product. For use on all ABS, disc and drum brakes. Quiets noise associated with excessive brake dust.
NOTE: SHIPS BY GROUND SERVICE ONLY