Disc Brake Repair Parts and Accessories

Stock# 5415146
UFP A-75 series replacement bolt on outer member slide assembly is designed to work with the A-60, A-75, and XR-84 hydraulic brake actuators. Zinc Plated for Maximum Corrosion Resistance. Fits on the end of a 3" wide trailer tongue.

Stock# 5415088
UFP A-75 series replacement bolt on outer member slide assembly is designed to work with the A-60, A-75,and XR-84 hydraulic brake actuators. Zinc Plated for Maximum Corrosion Resistance.

Stock# 5415013
UFP Disc Brake Master Cylinder is compatible with the following hydraulic disc brake actuators: A-60, A-70, A-75, A-84 & A-160 with reverse solenoid model 34500U. It features an all aluminum design and a reverse valve drain tube for hookup with a reverse solenoid. (Solenoid Sold Separately)

Stock# 5415150
UFP Disc Brake Master Cylinder is compatible with the following hydraulic disc brake actuators: A-60, A-70, A-75, A-84 & A-160.

Stock# 1651004
DEMCO Model DA66B Disc Master Cylinder replacement kit with cap and mounting hardware. This master cylinder is used in all Disc brake actuators from Demco.

Stock# 1651008
DEMCO Disc Master Cylinder replacement kit with bypass solenoid, cap and mounting hardware. This master cylinder can be used in all Disc brake actuators from Demco.
SUPPLIES LIMITED

Stock# 5237024
TITAN MODEL 60 ACTUATOR - Disc Brake Master cylinder replacement kit.

Stock# 5237125
TITAN MODEL 6 ACTUATOR - Master cylinder replacement kit with cap.

Stock# 5237025
TITAN MODEL 10 / 20 ACTUATOR - Disc Brake Master cylinder replacement kit with filler cap and mounting bracket.
SUPPLIES LIMITED

Stock# 7125178
Complete disc brake master cylinder replacement kit includes: Aluminum Master Cylinder, Push Rods, Breakaway Spring, Gasket, Baffle, Rollers, Pins and cap.
Note: For use with Tie Down Engineering models 66, 70 and 80 (Disc Brakes Only)

Stock# 7125180
Complete disc brake master cylinder replacement kit includes: Aluminum Master Cylinder, Push Rods, Breakaway Spring, Gasket, Baffle, Rollers, Pins, Cap, Hose, Hose Clamps and Fitting.
Note: For use with Tie Down Engineering model LP70 Button Latch Disc Brake Actuators (Disc Brakes Only)

Stock# 7125122
TIIEDOWN ENGINEERING model 660E replacement master cylinder cap with gasket and internal bladder. Also fits models 750E & 850E. Threads are 1.98" o.d.

Stock# 7125093
TIEDOWN ENGINEERING model 66 replacement master cylinder cap with gasket. Also fits models 70 & 80. Threads are 1.235" o.d.

Stock# 1651011
DEMCO Master Cylinder replacement cap is a direct replacement for all current master cylinders by Demco.

Stock# 5237013
TITAN replacement master cylinder filler cap for Titan/Dico Model 10 / 20 hydraulic brake actuators.

Stock# 5237108
TITAN MODEL 60 ACTUATOR - replacement break fluid reservoir cap with gasket.

Stock# 5237022
TITAN replacement master cylinder filler cap for Titan/Dico Model 6 hydraulic brake actuator.

Stock# 5237040
TITAN replacement master cylinder cover for Titan/Dico Model 10 / 20 hydraulic brake actuator.

Stock# 5237163
Titan Master Cylinder Push Rod for the Model 6 hydraulic brake actuators.

Stock# 5237117
The Titan Spacer Block kit allows you to use the Swing-Away Aero 7500 Disc Actuator on 3" x 4" tongues. Includes Spacer block and mounting bolts. (Nuts and washers not included)
SUPPLIES LIMITED ( QTY 1 )

Stock# 1651012
DEMCO DA91 Push Rod Assembly is a direct replacement push rod for the Demco model DA91 actuator both disc and drum.

Stock# 1651017
DEMCO DA10 Push Rod Assembly is a direct replacement push rod for the Demco model DA10 actuator both disc and drum.

Stock# 5237010
TITAN replacement push rod assembly for Titan/Dico Model 60 hydraulic brake actuator.

Stock# 5237009
TITAN replacement shock absorber for Titan/Dico Model 60 hydraulic brake actuator.

Stock# 5237015
TITAN replacement damper shock for Titan/Dico Model 6 and 10 hydraulic brake actuator.

Stock# 1651013
DEMCO DA91 Damper Shock is a direct replacement shock for the Demco model DA91 actuator both disc and drum.

Stock# 5237162
Replacement damper shock for Titan/Dico Model 20 hydraulic brake actuator. Sold as each.

Stock# 5237119
TITAN replacement master cylinder right handed bracket for Titan/Dico Model 10 / 20 hydraulic brake actuators.

Stock# 5415040
UFP zinc plated replacement latch kit for UFP Model A-60 hydraulic brake actuators.

Stock# 5237032
2-5/16" Adjustable Ball Coupler for TITAN Model 10 Leveler Channel hydraulic trailer brake actuator. 14,000 lb capacity

Stock# 5237033
Adjustable 1" thick clevis hitch for TITAN Model 20 Leveler Channel hydraulic trailer brake actuator.   20,000 lbs. Capacity

Stock# 5237031
3" Adjustable Lunette Eye for TITAN Model 20 Leveler Channel hydraulic trailer brake actuator.

Stock# 7125045
TIE DOWN ENGINEERING replacement safety pin with lanyard fits the model 66, 70 and 80 actuators.

Stock# 7125083
TIE DOWN ENGINEERING replacement breakaway cable assembly with button stop fits the model 66, 70, and 80.

Stock# 1651010
DEMCO Electric Reversing/Bypass Solenoid is a solenoid that mounts to the back of a master cylinder to shut off pressure to the brakes as well as run fluid through a secondary port back into the master cylinder

Stock# 7125131
Tie Down Engineering 'Backflow' trailer disc brake solenoid. A reverse lockout solenoid should be installed at the actuator before installation of disc brakes. The Backflow design allows for changing to reverse while vehicle is stopped in a down hill position.

Stock# 7125246
Tie Down Engineering trailer disc brake reversing solenoid. A reverse lockout solenoid should be installed at the actuator before installation of disc brakes.

Stock# 1506001
For Disc Brake manual reverse lockout. A reverse lockout valve should be installed at the actuator before installation of disc brakes

Stock# 1651009
DEMCO Inline Electric Reversing Solenoid is an inline solenoid that mounts to the back of a master cylinder to shut off pressure to the brakes for reversing.

Stock# 7125020
Tie Down Engineering trailer disc brake reversing solenoid. A reverse lockout solenoid should be installed at the actuator before installation of disc brakes.

Stock# 5415017
Since disc brakes generate full braking power in reverse, a reverse lockout solenoid should be installed at the actuator before installation of disc brakes. The 12 volt solenoid valve connects to the tow vehicles back up light circuit for automatic brake lockout. Unit can be wired independently or adapted to trailer wire harness with a 5-flat plug on trailer and tow vehicle.

Stock# 1561025
KODIAK 10" GAL-DEX COATED Vented Integral Rotor/Hub trailer disc brake assembly. Gal-Dex offers the best value of protection for salt water applications. (Bearings, seal, lug nuts and dust cap sold separately)

Stock# 5470027
MAT 10" Galvanized Vented Integral Rotor/Hub trailer disc brake assembly. Galvanized Coating offers the best value of protection for salt water applications. Includes inner and outer races which are already installed. (Bearings, seal, lug nuts and dust cap sold separately)

Stock# 5415029
UFP DB-35 zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 3,750 lb. capacity. They will accept 13" to 15" wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 5415127
UFP DB-35 Ranger disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 4,200 lb. capacity. They will accept 13" to 15" wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 1041506
LOADRITE - KNOTT zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 4,200 lb. capacity. They will accept 13" to 15" wheels.

Stock# 1041464
LOADRITE - KNOTT zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 3,500 lb. capacity. They will accept 13" to 15" wheels. (Lug nuts are sold separately)

Stock# 1561041
KODIAK 10" GAL-DEX COATED Vented 'Slip On' style rotors. GAL-DEX Coating offers the best value of protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 400 - 500 hours). 
Hub not included.

Stock# 1561042
KODIAK 10" Stainless Steel Vented 'Slip On' style rotors. Stainless steel offers the best protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 1,000 hours). 
Hub not included.

Stock# 1561112
KODIAK 11" GAL-DEX COATED Vented 'Slip On' style rotors, 9k-10k designed to be used with the Kodiak 338 Caliper. GAL-DEX Coating offers the best value of protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 400 - 500 hours). 
Hub not included.

Stock# 1561027
KODIAK 12" GAL-DEX COATED Vented Integral Rotor/Hub trailer disc brake assembly. GAL-DEX Coating offers the best value of protection for salt water applications. (Bearings, seal, lug nuts and dust cap sold separately)

Stock# 7103045
DEEMAXX 12" MAXX PLATED Vented Integral Rotor/Hub trailer disc brake assembly. MAXX plating offers the best value of protection for salt water applications. (Bearings, seal, lug nuts and dust cap sold separately)

Stock# 5415054
UFP DB-35 zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 6,000 lb. capacity. They will accept 15" to 16" 6-lug wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 1041466
LOADRITE - KNOTT zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 6,000 lb. capacity. They will accept 15" to 16" wheels. (Lug nuts are sold separately)

Stock# 1041500
LOADRITE - KNOTT zinc plated disc brake rotor comes with bearings, grease seal, spindle nut and washer, cotter pin, and is vented to help shed heat. It can be used with trailer axles that have up to a 6,000 lb. capacity and 15" to 16" wheels. (Lug nuts are sold separately). The caliper comes with pads and mounting bolts.

Stock# 5415101
UFP DB-35 7K zinc disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 7,000 lb. capacity. They will accept 15" to 16" 8-lug wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 1561043
KODIAK 12" GAL-DEX COATED Vented 'Slip On' style rotors. GAL-DEX Coating offers the best value of protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 400 - 500 hours). 
Hub not included.

Stock# 1561044
KODIAK 12" Stainless Steel Vented 'Slip On' style rotors. Stainless steel offers the best protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 1,000 hours). 
Hub not included.

Stock# 1561062
KODIAK 7K 13" GAL-DEX COATED Vented Integral Rotor/Hub trailer disc brake assembly. GAL-DEX Coating offers the best value of protection for salt water applications. (Bearings, seal, lug nuts and dust cap sold separately)

Stock# 1561063
KODIAK 7K 13" GAL-DEX COATED Vented Integral Oil-Bath Rotor/Hub trailer disc brake assembly with 9/16" studs. GAL-DEX Coating offers the best value of protection for salt water applications. (Oil Cap, Bearings, seal, and lug nuts sold separately)

Stock# 5470030
MAT Galvanized 13" Integral Disc Brake Rotor fits 7,000 lbs. axles with MAT 7K disc brakes. The rotor is a traditional vented style with additional vent holes in the hub cavity to help dissipate heat. (Bearings, seal, lug nuts and dust cap sold separately)

Stock# 1561094
KODIAK 13" GAL-DEX COATED Vented 'Slip On' style rotors for hubs with 5/8" studs. GAL-DEX Coating offers the best value of protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 400 - 500 hours). Hub not included.

Stock# 1561064
KODIAK 13" GAL-DEX COATED Vented 'Slip On' style rotors. GAL-DEX Coating offers the best value of protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 400 - 500 hours). 
Hub not included.

Stock# 1561095
KODIAK 13" E-COAT Vented 'Slip On' style rotors for hubs with 5/8" studs. E-coating offers the best value of protection for over the road use and for fresh water marine (or limited salt water) applications (i.e., during a standard salt spray test, rust will begin forming between 250 and 350 hours). Hub not included.

Stock# 1561092
KODIAK 13" E-COAT Vented 'Slip On' style rotors for hubs with 9/16" studs. E-coating offers the best value of protection for over the road use and for fresh water marine (or limited salt water) applications (i.e., during a standard salt spray test, rust will begin forming between 250 and 350 hours). Hub not included.

Stock# 1561094
KODIAK 13" GAL-DEX COATED Vented 'Slip On' style rotors for hubs with 9/16" studs. GAL-DEX Coating offers the best value of protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 400 - 500 hours). Hub not included.

Stock# 1561113
KODIAK 13" GAL-DEX COATED Vented 'Slip On' style rotors, 9k-10k designed to be used with the Kodiak 338 Caliper. GAL-DEX Coating offers the best value of protection for salt water applications (i.e., during a standard salt spray test, rust to begin forming in excess of 400 - 500 hours). 
Hub not included.

Stock# 7103046
DEEMAXX 13.1" 7K MAXX PLATED Vented Integral Rotor/Hub trailer disc brake assembly. MAXX plating offers the best value of protection for salt water applications. (Bearings, seal, lug nuts and dust cap sold separately)

Stock# 7103048
DEEMAXX 13.1" 8K MAXX PLATED Vented Integral Rotor/Hub with 5/8" studs. MAXX plating offers the best value of protection for salt water applications. (Bearings, seal, lug nuts and dust cap sold separately)

Stock# 5331344
Caliper Rebuild Kit for 6K, 7K and 8K Dexter disc brakes.

Stock# 5331345
Caliper Rebuild Kit for 10K, and 12K Dexter disc brakes.

Stock# 5470023
MAT Replacement Disc Brake Pad Kit fits DEXTER 10K -12K Calipers (K71-180-00) and includes 4 pads to service 1 axle.

Stock# 5331333
(K71-636-00) Caliper Replacement Kit for Dexter 6,000 lb. Disc Brake Axle - Fits LH or RH
SUPPLIES LIMITED

Stock# 5331343
(K71-693-00) Caliper Replacement Kit for Dexter 7,000 lb. Disc Brake Axle - Fits LH or RH
SUPPLIES LIMITED

Stock# 5331334
(K71-630-00) Caliper Replacement Kit for Dexter 8,000 lb. Disc Brake Axle - Fits LH or RH

Stock# 5470026
MAT #77-3.5KI-DBB Disc brake caliper galvanized mounting bracket. Fits 3,500 lb. to 3,700 lb. Axles with 4 hole brake flanges using MAT 10" Integral style brake assemblies. Will not work with slip-on style rotor/hubs.

Stock# 5470029
MAT Galvanized 13" Disc brake caliper mounting bracket fits 7,000 lb. axles with 5 hole brake flanges using MAT 13" Integral style rotors.

Stock# 5331432
(K90-002-02) Caliper Yoke/Bracket Replacement for Dexter 10,000 lb. to 12,000 lb. Disc Brake Axle - Fits LH or RH. Does NOT fit 12K torflex axles. Includes 8 O-Rings (Already Installed in Caliper Mount Sleeve).

Stock# 1561116
KODIAK 10K Rotor Spacer, 8 on 6-1/2" Bolt pattern. 

Stock# 5470025
MAT 77-3-6KLB Disc brake caliper (Galvanized) with 2-1/4" piston (stainless steel). Fits 3,500-6,000 lb. Axles, MAT 10" disc brake assemblies. Loaded standard with Non-Asbestos Ceramic friction pads.

Stock# 1561010
KODIAK #DBC-225-SS Disc brake caliper (Stainless Steel) with 2-1/4" piston (stainless steel). Fits 3,500-6,000 lb. Axles. Loaded standard with S.S. backed Non-Asbestos Ceramic friction pads.

Stock# 1561009
KODIAK #K71-DBC-225-D Disc brake caliper (GAL-DEX Coated) with 2-1/4" piston (stainless steel). Fits 3,500-6,000 lb. Axles. Loaded standard with Non-Asbestos ceramic friction pads.

Stock# 1561060
KODIAK #K71-DBC-250-D Disc brake caliper (GAL-DEX Coated) with 2-1/2" piston (stainless steel). Fits 7,000-8,000 lb. Axles. Loaded standard with Non-Asbestos Ceramic friction pads.

Stock# 1561061
089-DBC-250-SS Disc brake caliper (Stainless Steel) with 2-1/2" piston (stainless steel). Fits 7,000-8,000 lb. Axles. Loaded standard with stainless steel backed ceramic friction pads.

Stock# 5470028
MAT #77-7KLB Galvanized Disc brake caliper with 2-1/2" piston (stainless steel) for 13" integral rotors. Fits 7,000 lb. Axles. Loaded standard with Non-Asbestos Semi-Metallic pads.

Stock# 1561118
KODIAK #K71-DBC-338-D-R Disc brake right hand caliper (Gal-Dex) with 3-3/8" piston (stainless steel). Loaded standard with Non-Asbestos Ceramic friction pads.

Stock# 1561117
KODIAK #K71-DBC-338-D-L Disc brake left hand caliper (Gal-Dex) with 3-3/8" piston (stainless steel). Loaded standard with Non-Asbestos Ceramic friction pads.

Stock# 1561109
KODIAK #K71-DBC-2250-E-L Disc brake left hand caliper (E-Coat) with 2-1/2" piston (stainless steel). Fits 8KHD and 10,000 lb. to 12,000 lb. Axles, KODIAK 11" disc brake assemblies 071-2H-11-8D-5HD-REER and 071-2H-11-8D-9HD-REER. Loaded standard with Non-Asbestos Ceramic friction pads.

Stock# 1561110
KODIAK #K71-DBC-2250-E-R Disc brake right hand caliper (E-Coat) with 2-1/2" piston (stainless steel). Fits 8KHD and 10,000 lb. to 12,000 lb. Axles, KODIAK 11" disc brake assemblies 071-2H-11-8D-5HD-REER and 071-2H-11-8D-9HD-REER. Loaded standard with Non-Asbestos Ceramic friction pads.

Stock# 7125044
Replacement caliper assembly for 9.6", 10", & 12" Tie Down Engineering Vented Trailer Disc Brake Kits. Aluminum calipers have a Black E-Coat finish to provide double corrosion protection. Brake pads are included.

Stock# 1041461
LOADRITE - KNOTT left hand dacromet disc brake caliper with pads will fit 10"-12" brakes, comes with slider pins, does NOT come with caliper mounting bolts.

Stock# 1041462
LOADRITE - KNOTT right hand dacromet disc brake caliper with pads will fit 10"-12" brakes, comes with slider pins, does NOT come with caliper mounting bolts.

Stock# 5415011
UFP model DB-35 disc brake caliper features a zinc plated body, stainless steel brake pad guides and anti-rattle clips which help provide superior corrosion resistance especially in salt water applications. It also includes pre-loaded organic brake pads and mounting bolts. The model DB-35 Brake Calipers include a 2-year limited warranty.

Stock# 5415012
UFP model DB-35 disc brake caliper features a zinc plated body, stainless steel brake pad guides and anti-rattle clips which help provide superior corrosion resistance especially in salt water applications. It also includes pre-loaded organic brake pads and mounting bolts. The model DB-35 Brake Calipers include a 2-year limited warranty.

Stock# 5415030
UFP model DB-35 disc brake caliper features an aluminum body and a stainless steel piston which helps provide superior corrosion resistance especially in salt water applications. It also includes pre-loaded organic brake pads and mounting bolts. The model DB-35 Brake Calipers include a 2-year limited warranty.

Stock# 5415031
UFP model DB-35 disc brake caliper features an aluminum body and a stainless steel piston which helps provide superior corrosion resistance especially in salt water applications. It also includes pre-loaded organic brake pads and mounting bolts. The model DB-35 Brake Calipers include a 2-year limited warranty.

Stock# 7103218
DEEMAXX Disc brake caliper (MAXX Plated) with slider pins. Fits 3,500-6,000 lb. Axles, DEEMAXX 10" and 12" disc brake assemblies slip on or integral as long as correct bracket is used. Loaded standard with Non-Asbestos Ceramic friction pads.

Stock# 7103219
DEEMAXX Disc brake caliper (Stainless Steel) with slider pins and Stainless Steel Pads. Fits 3,500-6,000 lb. Axles, DEEMAXX 10" and 12" disc brake assemblies slip on or integral as long as correct bracket is used. Loaded standard with Non-Asbestos Ceramic friction pads.

Stock# 7103222
DEEMAXX Disc brake caliper (MAXX Plated) with slider pins. Fits 7,000-8,000 lb. Axles, DEEMAXX 13.1" disc brake assemblies slip on or integral as long as correct bracket is used. Loaded standard with Non-Asbestos Ceramic friction pads and slider pins.

Stock# 1561011
KODIAK #K71-DBC-225-PAD Ceramic disc brake pads with double coated polyurethane on backing plate. Fits 3.5k-6k lb. axles, Kodiak 10" and 12" disc brake assemblies with DBC-225 caliper. Includes (4) pads to repair two calipers.