UFP DB-35 12 in. Vented Zinc Plated Disc Brake Rotor (6-Lug) #44210U
My Cart (0)
Phone Sales & Technical Support
Mon - Thur 8am-6pm
Fri - Sat 8am-5pm


UFP DB-35 12" Vented Zinc Plated Disc Brake Rotor (6-Lug) #44210U

Our Price: $86.95

The UFP DB-35  zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 5200 lb. capacity. They will accept 15" to 16" wheels. (Lug nuts, bearings and seal are sold separately)

Spindle Size: 1-3/4" (25580) x 1-1/4" (LM60748) tapered
Diameter: 11-1/2"
Bolt circle:
6 on 5-1/2"
Inner Bearing: 1-3/4" (25580)
Inner Race: 25520 (Included)
Outer Bearing: 1-1/4" (LM67048)
Outer Race: LM67010 (Included)
Seal: 3.38" x 2.13"
Minimum Thickness: 17mm

Brand: UFP Trailer Parts
MPN: 44210U
DB-35 vs. DB-42

Unique Functional Products, UFP as they are commonly known, offers two different series of disc brakes. They offer a DB-35 and a DB-42 and since the parts are not interchangeable it is essential to be able to identify what you have.

ThUFP DB35e DB-35 visually appears more similar to an automotive caliper. It will have two
mounting ears below the body to attach theRotor_small caliper directly to the axle brake flange. The rotor is also identifiable but it can be a little more difficult. On the rotor/hub there will be a minimum thickness of 17mm 
(MIN THK 17.0 MM)
stamped on the inside of the back.


DB42_smallThe DB-42 is visually unique and consists of a thick caliper body that houses the piston, and a metal shroud that will house the pads. The DB-42 will have only one mounting bolt hole located in the center of the bleeder valve and brake line port. On the rotor/hub there will be a
minimum thickness of 22.40mm (MIN THK 22.40 MM) stamped on the backside.

Stock # 5415054