UFP DB-35 10 in. Vented Ranger Disc Brake Rotor (5-Lug) #42080U
My Cart (0)
Phone Sales & Technical Support
Mon - Thur 8am-6pm
Fri - Sat 8am-5pm


UFP DB-35 10" Vented RANGER Disc Brake Rotor (5-Lug) #42080U

Our Price: $84.50

Be the first to review this product

The UFP DB-35 Ranger disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 4200 lb. capacity. They will accept 13" to 15" wheels. (Lug nuts, bearings and seal are sold separately)

Spindle Size: 1-3/8" x 1-3/8" tapered
Diameter: 9-3/4"
Bolt circle:
5 on 4-1/2"
Inner Bearing: 1-3/8" (L68149)
Inner Race: L68110 (Included)
Outer Bearing: 1-3/8" (L68149)
Outer Race: L68110 (Included)
Seal: 1.68" ID x 2.56" OD
Minimum Thickness: 17mm
Finish: Plain

Brand: UFP Trailer Parts
MPN: 42080U
DB-35 vs. DB-42

Unique Functional Products, UFP as they are commonly known, offers two different series of disc brakes. They offer a DB-35 and a DB-42 and since the parts are not interchangeable it is essential to be able to identify what you have.

ThUFP DB35e DB-35 visually appears more similar to an automotive caliper. It will have two
mounting ears below the body to attach theRotor_small caliper directly to the axle brake flange. The rotor is also identifiable but it can be a little more difficult. On the rotor/hub there will be a minimum thickness of 17mm 
(MIN THK 17.0 MM)
stamped on the inside of the back.


DB42_smallThe DB-42 is visually unique and consists of a thick caliper body that houses the piston, and a metal shroud that will house the pads. The DB-42 will have only one mounting bolt hole located in the center of the bleeder valve and brake line port. On the rotor/hub there will be a
minimum thickness of 22.40mm (MIN THK 22.40 MM) stamped on the backside.

Stock # 5415127