BULLETPROOF Anti-Rattle Clamp, 3" #3ANTIRATTLE
Stock# 5464019BH FREE GROUND SHIPPING TO LOWER-48 U.S.
3" BulletProof Anti-Rattle Clamp is made from 1/2" thick pressed break steel. Installation is simple - just slide the hitch through the clamp, insert the hitch into the receiver, and tighten the bolt.
BulletProof Hitches are manufactured to a very tight tolerance of +/- .010 of an inch. Unfortunately, hitch receivers cannot always live up to these standards. Tolerances can vary as much as .100 of an inch and could cause some unwanted movement or rattle in the hitch. To solve this, BulletProof have developed the 3" BulletProof Anti-Rattle Clamp. It allows you to tighten the hitch to the receiver and eliminate all movement. This Anti-Rattle clamp is made from 1/2" thick pressed break steel and features a signature black, textured powder coat.
Installation is simple - just slide the hitch through the clamp, insert the hitch into the receiver, tighten the bolt and then tighten the jam nut with a wrench to eliminate movement inside the receiver.
Features:
- Anti-rattle clamps are NOT compatible with reducing sleeves or weight dsitribution systems
- Lifetime Warranty
- Made in America
ITEM SHIPS FROM REMOTE WAREHOUSE TO THE CONTIGUOUS UNITED STATES ONLY
| Product Name | BULLETPROOF Anti-Rattle Clamp, 3" #3ANTIRATTLE |
|---|