DEEMAXX 10" Slip On Rotor, MAXX Coating #RTR109MAXX
Stock# 7103208
DEEMAXX 10" Vented 'Slip On' style rotors has has MAXX plating which during a standard salt spray test, will only begin to form rust at 1008 hours.
Hub not included.
DEEMAXX 10" Slip On Rotor has MAXX plating which during a standard salt spray test, will only begin to form rust at 1008 hours. 'Hat Style' or 'Slip On' rotors fits over standard wheel hub (Not Included). The rotor is frequently stud piloted and is a loose fit on the hub. It is held in place by the wheel/wheel nuts. The rotor is a traditional vented style with additional vent holes in the hub cavity to help dissipate heat.
Always use High-Temperature Marine Bearing Grease with disc brakes due to the higher operating temperatures then drum brakes.
ROTOR DIAMETER: 10.9" VENTED
REPLACES DRUM DIAMETER: 10"
# OF STUD HOLES: 5 for 1/2" Studs
BOLT CIRCLE: 4-1/2" (14" & Larger Wheels)
AXLE RATING: 3500 lbs.
CAN BE USED WITH ELECTRIC-OVER-HYDRAULIC ACTUATORS
Hubs (Not Included) require a minimum stud length of 1-1/4" for standard steel trailer rims, aluminum rims may require longer studs.
| Product Name | DEEMAXX 10" Slip On Rotor, MAXX Coating #RTR109MAXX |
|---|