KODIAK 13" (8K) Trailer Disc Brake Kit 9/16" Stud, ECOAT #K71-2H-133-8D-5-DDD

Includes one pair of KODIAK 13" E-COAT Finish Vented Integral Rotor/Hub assembly, Caliper & Mounting Bracket w/Hardware. Fits DEXTER AXLE brand 8k axles.
3 YEAR KODIAK WARRANTY
E-coating offers the best value of protection for over the road use and for fresh water marine (or limited salt water) applications (i.e., during a standard salt spray test, rust will begin forming between 250 and 350 hours).
The INTEGRAL (One Piece) Hub & Rotor is cast as a single unit. Wheel studs are pressed into the rotor. Hub and rotor are balanced as one unit, which offers a smoother ride. Caliper mounts to 4-bolt brake flange and fits inside 16" and larger wheels. Caliper is loaded standard with Non-Asbestos Ceramic friction pads. Kit also includes the inner and outer bearing race.

Always use High-Temperature Marine Bearing Grease with disc brakes due to the higher operating temperatures as compared to drum brakes.

ROTOR DIAMETER: 13" VENTED, Oil Bath
BEARING SIZE: 1-3/4" (# 25580 -1.75" x 3.26") x 1-1/4" (# 02475 -1.25" x 2.6875" x 0.875")
GREASE/OIL SEAL OD: 3.38"
# OF STUDS: 8 on 6-1/2", 9/16" wheel studs
BOLT CIRCLE: 6-1/2" (16" & Larger Wheels)
AXLE RATING: 8,000 lbs.
BRAKE FLANGE: 4 Hole
CAN BE USED WITH ELECTRIC-OVER-HYDRAULIC ACTUATORS

Cross ref#: 2/H-133-8D-5-EED-K, 2/H-133-8D-5-DDD-K