LOADRITE - KNOTT Galvanized Trailer Hub, 1-3/4" x 1-1/4" #6042.40K

LOADRITE - KNOTT Galvanized Trailer Hub has 1-3/4" (25580) x 1-1/4" (15123) bearings and will work with any standard spindle with removable bearings. 6 Lug unit with a 5.5" Bolt pattern and comes with Knott dust cap, washer, cotter pin, castle nut, and grease seal (2.25" id. x 3.376" od.). This hub will not work with Knott hubs equipped with sealed cartridge bearings.

* Intended to be used with EZ-Lube spindles

* This hub will come with a pre-installed grease seal. The inner bearing will NOT be greased. LOADRITE expects you to use the grease/zerk fitting on the end of the spindle to push grease through to the inner bearing. If you do not have a grease/zerk fitting on the end of the spindle, it is recommended to purchase an extra grease seal as removal of the pre-installed one can damage it.