LOADRITE - KNOTT 1-3/8" x 1-3/8" Galvanized Trailer Hub #6042.42K
Stock# 1041502
LOADRITE - KNOTT Galvanized Trailer Hub has 1-3/8" x 1-3/8" bearings and will work with any standard spindle with removable bearings. 5 Lug unit with a 4.5" Bolt pattern and comes with lug nuts, Knott dust cap, washer, cotter pin, castle nut, and grease seal (2.56" x 1.72").
LOADRITE - KNOTT Galvanized Trailer Hub has 1-3/8" x 1-3/8" bearings and will work with any standard spindle with removable bearings. 5 Lug unit with a 4.5" Bolt pattern and comes with lug nuts, Knott dust cap, washer, cotter pin, castle nut, and grease seal (2.56" x 1.72"). This hub will not work with Knott hubs equipped with sealed cartridge bearings.
* This hub will come with a pre-installed grease seal. The inner bearing will NOT be greased. LOADRITE expects you to use the grease/zerk fitting on the end of the spindle to push grease through to the inner bearing. If you do not have a grease/zerk fitting on the end of the spindle, it is recommended to purchase an extra grease seal as removal of the pre-installed one can damage it.
| Product Name | LOADRITE - KNOTT 1-3/8" x 1-3/8" Galvanized Trailer Hub #6042.42K |
|---|
