LOAD RITE Hubs, Bearings and Grease Caps

Stock# 1041334
LOADRITE short hub kit includes: hub with studs and races, lug nuts, seal (1-1/4" ID) and 1-1/16" bearings. Hub journal length is 3-1/2" thru the center from rear casting edge to front casting edge. (1,350 Lb. Capacity)

Stock# 1041475
LOADRITE - KNOTT Galvanized Trailer Hub has 1-3/8" x 1-1/16" bearings and will work with any standard spindle with removable bearings. 5 Lug unit with a 4.5" Bolt pattern and comes with lug nuts, Knott dust cap, washer, cotter pin, castle nut, and pre-installed grease seal.

Stock# 1041502
LOADRITE - KNOTT Galvanized Trailer Hub has 1-3/8" x 1-3/8" bearings and will work with any standard spindle with removable bearings. 5 Lug unit with a 4.5" Bolt pattern and comes with lug nuts, Knott dust cap, washer, cotter pin, castle nut, and grease seal (2.56" x 1.72").

Stock# 1041503
LOADRITE - KNOTT Galvanized Trailer Hub has 1-3/4" (25580) x 1-1/4" (15123) bearings and will work with any standard spindle with removable bearings. 6 Lug unit with a 5.5" Bolt pattern and comes with Knott dust cap, washer, cotter pin, castle nut, and grease seal.

Stock# 1041422
LOADRITE - KNOTT Galvanized Trailer Hub has 1-1/16" x 1-1/16" bearings and will work with any standard spindle with removable bearings. 5 Lug unit with a 4.5" Bolt pattern and comes with lug nuts, Knott dust cap, washer, cotter pin, castle nut, and grease seal.

Stock# 1041033
LOADRITE wheel bearing kit fits 1.25" x 1.75" tapered spindle, 8 bolt LoadRite hub & Dexter Drum  (click to see part #'s)

Stock# 1041013
LOADRITE bearing kit Fits 1.25" x 1.75" tapered spindle, 6-bolt LoadRite hub made after 06/98 (click to see part #'s)

Stock# 1041007
LOADRITE bearing kit fits 1.25" x 1.75" tapered spindle, 6 bolt LoadRite hub made through 06/98 (click to see part #'s) with 2.125" ID grease seal for 5.2k axles

Stock# 1041002
Clear plastic wheel bearing protector allows for visual inspection of grease color and capacity. Stainless Spring loaded fill plunger with overfill prevention hole help keep bearings packed at all times.
SUPPLIES LIMITED

Stock# 1041494
LOADRITE UFP style dust cap with a 2.33" outer diameter. Sold as each.

Stock# 1041504
LOADRITE dust cap with a 2.44" outer diameter. Sold as each.

Stock# 1041463
LOADRITE - KNOTT trailer hub dust cap with a 2.44" outer diameter. Sold as each.

Stock# 1041460
LOADRITE - KNOTT trailer stainless steel hub dust cap with center grommet has a 1.98" outer diameter. Sold as each.

Stock# 1041434
LOADRITE - KNOTT rubber grommet used for Autoflex Knott style trailer hub dust caps with a 1.98" or 2.441" outer diameter. Sold as each.

Stock# 1041011
Axle nut retainer for 13/16" 'D' style spindles with cotter pin hole. Common on LOADRITE & EZ-LOADER axles.

Stock# 1041412
LOADRITE spindle nut kit comes with a 3/4" nut retainer, 13/16" x 20 spindle nut, 3/4" I.D. x 1-1/2" O.D. "D" washer, and a 2-1/8" cotter pin. Commonly used on LOADRITE & EZ-LOADER trailer axles.