Snowmobile Trailer Parts

Stock# 7102161
TRITON 09250-H Coverall hinge post is used on Triton clam shells to secure the cover to the trailer.

Stock# 1622050
Whether stuck in slush, deep powder or have a sled out of commission, ensure you are prepared. This rescue strap should be part of every snowmobiler's tool kit. It is made using durable webbing and Snap Hook ends so it does not come off during use. 835 lb. Working Load Limit

Stock# 7102064
TRITON Aluminum Trailer Tongue is designed to be a factory replacement for most LT Series trailers. The tongue is made from high strength aluminum and measures 3" x 3-1/2" x 80". It comes with a coupler and safety chains and is ready to bolt on for use.  The coupler is for a 2" ball and is rated up to 3,500 lbs. Tongue is pre drilled.

Stock# 5419049
Track Length = 70.98" Frame Center = 55.00"
Factory replacement torsion axle for KARAVAN Snowmobile Trailers. Galvanized 2" x 2" torsion axle assembly includes pre-installed hubs without lug nuts.

Stock# 7102053
Overall Length = 75.5" Hub Face = 71" Bracket Center = 52"
TRITON axle weldment includes mounting hardware, hubs, bearing lube caps, bearings, seal and dust cap. Lug nuts sold separately.

Stock# 7102169
Overall Length = 77-5/8" Hub Face = 71-5/8" Bracket Center = 52-1/2"
TRITON axle weldment includes mounting hardware, hubs, bearing lube caps, bearings, seal and dust cap. Lug nuts sold separately.

Stock# 7102122
TRITON U-Bolt Spare Trailer Tire Mount can be mounted to any 3" box tubing. The two plates designed to sandwich the nuts can be locked together using a padlock for added security. Will accept 4-lug or 5-lug rims.

Stock# 7102132
TRITON wheel mounting studs have 1/2-20 hub thread and 1/2-20 nut thread and are 2" in total length.  The are designed to help utilize a bolt style hub as a stud style hub.

Stock# 7102037
TRITON Black Coated Gullwing Tiedown Bar is designed to be mounted on the front of a snowmobile trailer to help lock in the ski's.  The bar is 46.25" long with a 1/2" mounting hole in the center of the bar and is commonly use on an XT series Triton trailer.

Stock# 7102033
TRITON Gullwing Tiedown Screw is designed to mount and tighten the Triton gullwings to the trailer to lock in the ski's on a snowmobile

Stock# 7102032
TRITON Gullwing Tiedown Screw with cap is designed to mount and tighten the Triton gullwings to the trailer to lock in the ski's on a snowmobile

Stock# 5419175
KARAVAN black textured tiedown bar is designed to be mounted on the front of a snowmobile trailer to help lock in the ski's. The bar is 45.53" long with a 1/2" mounting hole in the center of the bar.

Stock# 7102066
TRITON replacement gas spring is a direct replacement for 10' 2KF covers. The shock is designed to prop up the coverall added to a Triton Snowmobile trailer.
SUPPLIES LIMITED

Stock# 7102050
TRITON Tilt Bed Gas Spring replacement will work with most Triton Snowmobile trailers that have a tilt bed. The Gas spring replacement is a direct replacement for the spring in kit 06933.

Stock# 7102187
TRITON 10443-ABS Chrome Plastic Wheel Center Dust Cap Assembly With Removable End Cap. This dust cap package is sold as one assembled piece. Fits most 12", 13", 14", and 15" wheels with a 3.19" pilot diameter.

Stock# 7102049
TRITON Tilt Bed Gas Spring Lift Kit will work with Triton Snowmobile trailers that have a tilt bed.  The Gas spring lift kit comes with mounting hardware to mount it onto XT, LT, and Elite series snowmobile trailers.

Stock# 7102048
TRITON Tilt Bed Spring Lift Kit will work with Triton Snowmobile trailers that use a wishbone style tongue.  The torsion style ramp springs assist in tilting the ramp of the trailer for easier loading and unloading.  Works with most XT & LT series Triton trailers.

Stock# 7102047
TRITON Tilt Bed Spring Lift Kit will work with Triton Snowmobile trailers that use a straight tongue.  The torsion style ramp springs assist in tilting the ramp of the trailer for easier loading and unloading.

Stock# 7102126
TRITON insert nut with snap ring is used in many different applications on Triton trailers.  Some applications included their add a nut kit, or the tilt bed tensioner.

Stock# 7102040
TRITON Tilt Bed Aluminum Tongue Latch Assembly is most commonly use on tilt bed snowmobile trailers. The latch kit is designed to secure the connection when tilt bed is closed.

Stock# 7102039
TRITON Tilt Bed Aluminum Tongue Latch Bracket is most commonly use on tilt bed snowmobile trailers.  The bracket is designed to be used with the tongue latch screw to secure the connection when tilt bed is closed.

Stock# 7102038
TRITON Tilt Bed Tongue Latch Screw is most commonly use on tilt bed snowmobile trailers.  The Screw is designed to be used with the tongue latch bracket to secure the connection when tilt bed is closed.

Stock# 7102036
TRITON Tilt Bed Tongue Latch Square Nut is most commonly use on tilt bed snowmobile trailers.  The nut is designed to be used with the tongue latch bracket and screw to secure the connection when tilt bed is closed.

Stock# 7102031
TRITON Tilt Bed Bed Pin can be found on most Triton tilt bed trailers to help secure the bed.  The shaft measures 4-3/4" x 1/2" and the chain measures 12".

Stock# 7102077
TRITON AUT Ramp Pin can be found on most Triton AUT series trailers to help secure the ramp.  The shaft measures 3-1/2" x 3/8" and the lanyard measures 10".

Stock# 7102068
TRITON black painted trailer door handle rotates 90°. Locking model can be locked in 2 positions spaced 90° apart. 5/16" square shaft 2-5/8" long, 1-1/2" C-C mounting holes. Includes two keys.

Stock# 7102065
TRITON Chrome Rear Cover Handle comes with all of the mounting hardware.  It is designed for use on Triton Snowmobile trailers and mounts on 9-1/8" centers.

Stock# 7102175
TRITON aluminum roof rack kit allows you to open up more storage by adding 2, 3, or 4 of the Triton 11994 Roof Rack Kits to load ladders, pipe material and other items to the top of your trailer.
SUPPLIES LIMITED - 2 left in stock

Stock# 7102052
TRITON Flat 4-Prong 10' Leader Harness has a vehicle end and trailer end to extend the connection when needed.

Stock# 7102129
TRITON Flat 4-prong  wiring harness is specifically designed to fit model LT10, Elite10, and XT10VR.

Stock# 7102130
TRITON Flat 4-prong  wiring harness is specifically designed to fit XT Series and model LT10-101WB

Stock# 7102136
TRITON vinyl trim package is a decorative trim that is designed to cover up screws and keep debris out of areas around doors and hinges. It is 1" wide and comes in a 20' roll.

Stock# 7102124
TRITON Torx Deck screw is 1/4" x 1" and is used on most Triton trailers for mounting the decking.

Stock# 5419158
Track Length = 53" Frame Center = 42.32"
KARAVAN galvanized 2" x 2" torsion axle assembly includes pre installed hubs and brake mounting flanges. Does NOT include lug nuts.

Stock# 5419159
Track Length = 53" Frame Center = 42.32"
KARAVAN galvanized 2" x 2" torsion axle assembly includes pre installed hubs. Does NOT include lug nuts.