Hitch Drawbars & Ball Mounts are available in a wide variety of sizes, styles, finishes and capacities. A selection of "Adjustable" and "Multi-Ball" ball mounts are also listed in this section. Also check out the adjustable aluminum 'Rapid Hitch' product line for top quality towing drawbars. Please review the diagrams below to determine "Ball Mount Measurement" locations. These specifications are referred to throughout this section.
Stock# 7003078 CURT class 3 ball mount has a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It features a length of 8-1/4", a drop of 2" and a possible rise of 3/4".
Stock# 7003079 CURT class 3 ball mount has a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It features a length of 10-1/4", a drop of 2" and a possible rise of 3/4".
Stock# 7003157 CURT class 3 ball mount has a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. Length = 8-1/4", Rise = 3/4", Drop = 2", fits 1" ball shank.
Stock# 7003160 Curt hitch ball mount features a 2" x 2" shank to fit any industry-standard 2" receiver. It is tested and rated to 8,000 lbs. gross trailer weight and 800 lbs. tongue weight. Length = 12", Rise = 1", Drop = 2", fits 1" ball shank.
Stock# 7003158 This particular class 3 ball mount has a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. Length = 8-1/4", Rise = 2", Drop = 4", fits 1" ball shank.
Stock# 7003161 CURT hitch ball mount features a 2" x 2" shank to fit any industry-standard 2" receiver. It is tested and rated to 8,000 lbs. gross trailer weight and 800 lbs. tongue weight. It also features a 1" hole to accept a trailer ball. It has a built-in 4" drop or can be flipped for a 3" rise to promote level towing between your vehicle and trailer. Length = 12", Rise = 3", Drop = 4", fits 1" ball shank.
Stock# 7003159 CURT class 3 ball mount can be used in the drop position to provide a drop of 6", a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. Length = 9-1/4", Rise = 4", Drop = 6", fits 1" ball shank
Stock# 5020586 Black powder coat finish, hollow shank ball mount rated at 10000 lbs. (GTW). Note: Use in Drop position ONLY Length = 9", Rise = N/A, Drop = 6", fits 1-1/4" ball shank. Pin and clip sold separately. SUPPLIES LIMITED
Stock# 5020587 Black powder coat finish, hollow shank ball mount rated at 10000 lbs. (GTW). Note: Use in Drop position ONLY Length = 9", Rise = N/A, Drop = 8", fits 1-1/4" ball shank, 1" x 3" ball platform. Pin and clip sold separately. SUPPLIES LIMITED
Stock# 5020596 Black powder coat finish, straight-cut ball mount rated at 13,000 lbs. (GTW) Drop Position Length = 10", Rise = 3-1/2", Drop = 5", fits 1-1/4" ball shank. Pin and clip sold separately. SUPPLIES LIMITED
Stock# 7003162 This hitch ball mount features a 2" x 2" shank to fit any industry-standard 2" receiver. It is tested and rated to 8,000 lbs. gross trailer weight and 800 lbs. tongue weight. It also features a 1" hole to accept a trailer ball. Length = 12", Rise = 5", Drop = 6", fits 1" ball shank
Stock# 7155009 FREE GROUND SHIPPING TO LOWER-48 U.S. TPS adjustable hitch ball mount is constructed from cast steel and is rated for 12,000 lbs. gross trailer weight and 1,000 lbs. tongue weight (limited to lowest-rated towing component). This channel mount offers a maximum drop of 9", and it can also flipped for a maximum rise of 2", and it features a 1" tow ball hole to accept a hitch ball (sold separately).
Stock# 5397004 The 2" Rapid-Hitch with 6" drop is made of high-grade 6061-T6 aluminum that will never rust, chip or peel. A one pin application adjusts the height of the drop and changes the ball size. When only the best will do... you need the Rapid Hitch. The easiest to use and most versatile ball mount system available today.
Stock# 5397003 2" square Rapid-Hitch with 6" drop is made of high-grade 6061-T6 aluminum that will never rust, chip or peel. A one pin application adjusts the height of the drop and changes the ball size. When only the best will do... you need the Rapid Hitch. The easiest to use and most versatile ball mount system available today.
Stock# 5397024 The 2-1/2" Rapid-Hitch with 6" drop is made of high-grade 6061-T6 aluminum that will never rust, chip or peel. A one pin application adjusts the height of the drop and changes the ball size. When only the best will do... you need the Rapid Hitch. The easiest to use and most versatile ball mount system available today.
Stock# 5397025 Rapid Hitch 2-1/2" Adjustable 10" Drop Drawbar is made of high-grade 6061-T6 aluminum that will never rust, chip or peel. A one pin application adjusts the height of the drop and changes the ball size. The easiest to use and most versatile ball mount system available today.
Stock# 7003033 CURT adjustable ball mount has a shank size of 2" x 2" , features two different trailer ball sizes to accommodate two different coupler sizes: 2" and 2-5/16", and comes equipped with a clevis bar to accept a lunette ring. The 2" trailer ball offers a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs., while the 2-5/16" ball offers 10,000 lbs. GTW and 1,000 lbs. TW.
Stock# 5397023 The 2-1/2" Rapid-Hitch with 8" drop is made of all steel construction tested to meet SAE J684 standards. A one pin application adjusts the height of the drop and changes the ball size (2" & 2-5/16"). 10k/16k Capacities
Stock# 7003088 CURT adjustable channel mount comes with a 2" shank to fit any 2" x 2" receiver hitch. The shank has two hitch pin holes to adjust the length of the ball mount from 10" to 11". This model is rated for a maximum gross trailer weight capacity of 8,000 pounds for the 2" ball and 10,000 pounds for the 2-5/16" ball (never exceed the weight ratings of the lowest-rated towing component).
Stock# 7155006 FREE GROUND SHIPPING TO LOWER-48 U.S. TPS Adjustable Dual Ball Mount features all-steel construction, 7 positions, and lets one tow up to 12,000-pounds with the convenience of a 6-1/2-inch drop to a 7-1/2-inch rise. Includes 2-inch and 2-5/16-inch solid forged chrome welded hitch balls.
Stock# 7003109 CURT adjustable channel mount comes with a 2" shank to fit any 2" x 2" receiver hitch. The shank has two hitch pin holes to adjust the length of the ball mount from 10" to 11". This model is rated for a maximum gross trailer weight capacity of 10,000 pounds for the 2" ball and 14,000 pounds for the 2-5/16" ball (never exceed the weight ratings of the lowest-rated towing component).
Stock# 7003113 CURT adjustable channel mount comes with a 2" shank to fit any 2" x 2" receiver hitch, max rise of 9-1/8" and drop of 10-1/8". The shank has two hitch pin holes to adjust the length of the ball mount from 11" to 12". This model is rated for a maximum gross trailer weight capacity of 10,000 pounds for the 2" ball and 14,000 pounds for the 2-5/16" ball (never exceed the weight ratings of the lowest-rated towing component).
Stock# 7003114 CURT adjustable channel mount comes with a 2-1/2" shank to fit any 2-1/2" x 2-1/2" receiver hitch, max rise of 9-1/8" and drop of 10-1/8". The shank has two hitch pin holes to adjust the length of the ball mount from 11" to 12". This model is rated for a maximum gross trailer weight capacity of 10,000 pounds for the 2" ball and 20,000 pounds for the 2-5/16" ball (never exceed the weight ratings of the lowest-rated towing component).
Stock# 7003115 CURT adjustable channel mount comes with a 3" shank to fit any 3" x 3" receiver hitch, max rise of 8-5/8" and drop of 10-5/8". The shank has two hitch pin holes to adjust the length of the ball mount from 11" to 12". This model is rated for a maximum gross trailer weight capacity of 10,000 pounds for the 2" ball and 20,000 pounds for the 2-5/16" ball (never exceed the weight ratings of the lowest-rated towing component).
Stock# 7003110 CURT adjustable channel mount comes with a 2-1/2" shank to fit any 2-1/2" x 2-1/2" receiver hitch. The shank has two hitch pin holes to adjust the length of the ball mount from 11" to 12". This model is rated for a maximum gross trailer weight capacity of 10,000 pounds for the 2" ball and 20,000 pounds for the 2-5/16" ball (never exceed the weight ratings of the lowest-rated towing component).
Stock# 7003163 CURT HD adjustable mount comes with a 2" shank to fit any 2" x 2" receiver hitch. The forged 2" ball is rated for 10,000 lbs. and the 2-5/16" ball rated for 15,000 lbs. Shank can be flipped for a max drop of 5-1/2" or rise of 4-1/2".
Stock# 7003165 CURT HD adjustable mount comes with a 2-1/2" shank to fit any 2-1/2" x 2-1/2" receiver hitch. The forged 2" ball is rated for 10,000 lbs. and the 2-5/16" ball rated for 20,000 lbs. Shank can be flipped for a max drop of 5-1/2" or rise of 4".
Stock# 7003164 CURT HD adjustable mount comes with a 2" shank to fit any 2" x 2" receiver hitch. The forged 2" ball is rated for 10,000 lbs. and the 2-5/16" ball rated for 15,000 lbs. Shank can be flipped for a max drop of 10" or rise of 9".
Stock# 7003166 CURT HD adjustable mount comes with a 2-1/2" shank to fit any 2-1/2" x 2-1/2" receiver hitch. The forged 2" ball is rated for 10,000 lbs. and the 2-5/16" ball rated for 20,000 lbs. Provides max drop of 11-3/4" (not intended for use in rise position)
Stock# 7003035 CURT adjustable ball mount has a shank size of 2" x 2" and features three different trailer ball sizes to accommodate all standard coupler sizes: 1-7/8", 2" and 2-5/16". The 1-7/8" trailer ball offers a gross trailer weight capacity of 6,000 lbs. and a tongue weight capacity of 600 lbs. The 2" trailer ball has a GTW capacity of 7,500 lbs. and a TW capacity of 750 lbs., and the 2-5/16" ball offers 10,000 lbs. GTW and 1,000 lbs. TW.
Stock# 7003108 CURT heavy-duty cushion hitch ball mount is constructed from cast steel and is rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight (limited to lowest-rated towing component). This channel mount offers a maximum drop of 6-3/4", and it can also flipped for a maximum rise of 5-1/4", and it features a 1" tow ball hole to accept a heavy-duty hitch ball (sold separately).
Stock# 7003034 CURT adjustable ball mount has a shank size of 2" x 2" , features two different trailer ball sizes to accommodate two different coupler sizes: 2" and 2-5/16", and comes equipped with a clevis bar to accept a lunette ring. The 2" trailer ball offers a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs., while the 2-5/16" ball offers 10,000 lbs. GTW and 1,000 lbs. TW.
Stock# 7003039 CURT dual-function ball mount provides a trailer ball platform for towing a trailer but also has an extra receiver tube to accept the shank of a bike rack, cargo carrier or other hitch-mounted accessory. The ball mount tongue has a 1" hole to accept a trailer ball, and it offers a gross trailer weight capacity of 7,500 lbs. and a tongue weight rating of 750 lbs. The extra receiver is not designed for towing a trailer.
Stock# 7003036 CURT 6K clevis pin and ball mount has a shank size of 2" x 2" and a gross trailer weight capacity of 6,000 lbs. and a tongue weight capacity of 600 lbs. SUPPLIES LIMITED
Stock# 1332122BP Buyers Products gooseneck ball hitch U-bolt kit is designed to be used with Buyers gooseneck ball hitches. This kit adds u-bolts to an existing system to connect safety chains.
Stock# 7003083 CURT replacement dual ball for the Rebellion XD ball mount is designed to mount onto the vertical shank. It has a 2" ball rated for 10,000 lbs. and a 2-5/16" ball rated for 15,000 lbs.
Stock# 7003103 CURT replacement pins for the Rebellion™ XD ball mount are designed to replace the hitch pins of the vertical shank. They securely attach the trailer ball tongue or other accessory to the adjustable shank and are retained with the Rebellion™ XD spring clip that are sold separately.
Stock# 1332118BP Buyers Products gooseneck 42" steel hitch plate provides 25,000 pounds of towing capacity without the hassle of having to install a big or bulky gooseneck hitch.
Stock# 1332119BP Buyers Products gooseneck 42" steel hitch plate provides 25,000 pounds of towing capacity without the hassle of having to install a big or bulky gooseneck hitch.
Stock# 7003020 CURT 3-in-1 ATV ball mount has multiple features, including a trailer ball for towing a small trailer, a clevis pin that accepts a tow hook or lunette ring for straight towing and a 5/8" hole for coupling a pin-style coupler. With its 2" x 2" shank, the 3-in-1 ATV ball mount lets you get more done no matter what your project may be.
Stock# 1536303-ORMD B'LASTER® PB penetrating catalyst is a powerful and concentrated co-polymer penetrant that breaks loose surface tension rust and corrosion. The capillary action allows PB to "pull" itself uphill and into the tightest cavities to attack rust from all angles. NOTE: SHIPS BY GROUND SERVICE ONLY
Stock# 7003054 This simple bracket makes it easy to keep your trailer safety chains from dragging on the ground while towing. The bracket securely bolts onto virtually any 2-inch x 2-inch shank and features two wire hooks that provide a convenient, intermediate hanger point for the safety chains. SUPPLIES LIMITED
