TIEDOWN 61.75" Square Galvanized Trailer Axle, 11 Ga. (2,000 lb.) #50029

Stock# 7125164
Overall Length = 66" Hub Face = 61.75" Spring Center = Recommended 50" Capacity = 2,000 lbs.  Axle weldment with spindles, spindle nuts & cotter pins. Wheel hubs & bearings sold separately.

$146.50
SKU
7125164

Universal replacement axle for trailers. Galvanized axle stock weldment only. Features a stainless steel wear sleeve. Wheel Hubs and bearings sold separately. Does not have an EZ Lube grease fitting.

Axle Type: 1-1/2" x 1-1/2" Square - Galvanized
Load Rating: 2,000 lbs. (11 Gauge)
Overall Length: 66" End of Spindle to End of Spindle
Spring Center: 50" (Pre-Drilled)
Hub Face: 61.75"
Hub Type: 4 or 5 bolt (Not Included)
Spindle Size: 1-1/16" x 1-1/16"
Grease Seal: 1-1/4"

Camber: 1° Per Side Welded at Spindles

Note: Axles are shipped without drain hole. It is the customer's responsibility to drill a 5/16" drain hole. Axles are non-returnable once holes have been drilled.

Brand
Dexter Marine
Manufacturer Part Number
50029
More Information
Product Name TIEDOWN 61.75" Square Galvanized Trailer Axle, 11 Ga. (2,000 lb.) #50029
Write Your Own Review
You're reviewing:TIEDOWN 61.75" Square Galvanized Trailer Axle, 11 Ga. (2,000 lb.) #50029
Your Rating
We found other products you might like!