Closeout Tractor Trailer Parts and Accessories

Stock# 5351009
Bevel and Pinion gear kit. Used on SAF HOLLAND Mark V Series landing gear jack. Kit contains one bevel gear, one pinion gear and all other hardware needed for installation.
SUPPLIES LIMITED

Stock# 5445124
FLEET ENGINEERS Maximum Strength Steel Lock Assembly is a  heavy-duty cast grade 30 steellock with pins that are mechanically fastened in place for optimum strength. No welds to fail or plating to burn off and rust.
SUPPLIES LIMITED - 2 left in stock

Stock# 5445017
FLEET ENGINEERS Standard Quick Pick Mount Kit allows you to position the FR-22 fenders where needed when dealing with limited mounting space. The steel constructed mounts have a RoadKote® finish and a 5" offset between centers of tubes.
SUPPLIES LIMITED

Stock# 5446040
The L1443E-EF1 Brake Shoe Kit includes: (2) 15" x 4" "ES" Eaton Front lined brake shoes and (1) EF1 complete hardware kit. (23K Rating)
SUPPLIES LIMITED

Stock# 1583093
Velvac® Trailer Air Supply knob and pin kit for PP-7 style dash control valves.
Replaces Bendix 290655 & Midland KN20900
SUPPLIES LIMITED

Stock# 5445048
Stainless Steel Mudflap Plate keep mudflaps/splash guards from blowing or curling. This was designed for mudflaps 24" wide and features square punched mounting holes. No hardware included. 1 upper plate per kit.
SUPPLIES LIMITED - 2 left in stock

Stock# 1326434
BUYERS PRODUCTS heavy-duty serrated wheel chock has an galvanized finish and is ideal for use in ice and snow. Also has an integral grip for easy handling. Measures: 10" wide x 9" long x 6" high.
SUPPLIES LIMITED

Stock# 1326867
Buyers Products power disconnect timer operates on 12v 20amp solid state. This timer has a durable metal case with 4-wire terminals and over current protection.
SUPPLIES LIMITED - 2 left in stock

Stock# 1326868
Buyers Products dual fuse holder adds an additional circuit to any existing circuit. Plugs into occupied or vacant fuse block slot to add an additional circuit. Provides one fuse holder to protect existing circuit, and a second to protect new circuit.
SUPPLIES LIMITED - 1 left in stock

Stock# 1326871
Buyers Products dual fuse holder adds an additional circuit to any existing circuit. Plugs into occupied or vacant fuse block slot to add an additional circuit. Provides one fuse holder to protect existing circuit, and a second to protect new circuit.
SUPPLIES LIMITED - 1 left in stock

Stock# 1330816
Buyers RO5B-Series 5" Travel Control Cable is comparable to Chelsea® cables and comes with knob. The cable specs are 3/8"-24 and 1/2"-20 thread with .312 diameter spiral wound conduit and .085 diameter stainless steel core. Cable Length 15'
SUPPLIES LIMITED - 1 left in stock

Stock# 1330823
Buyers R21C-Series Choke Cable comes standard with a 3/8"-24 thread. Cable Length: 6'
SUPPLIES LIMITED

Stock# 1330840
Buyers Single Lever Console is compatible with any B2063-series single lever controls.
Measures: 9" x 1-3/4"
SUPPLIES LIMITED - 2 left in stock

Stock# 1330841
Buyers double Lever Console is compatible with any B2063-series double lever controls.
Measures: 9" x 3-3/8"
SUPPLIES LIMITED

Stock# 1330842
Buyers Triple Lever Console is compatible with any B2063-series triple lever controls.
Measures: 9" x 4-15/16"
SUPPLIES LIMITED - 1 left in stock

Stock# 1330843
Buyers Quad Lever Console is compatible with any B2063-series Quad lever controls.
Measures: 9" x 6-9/16"
SUPPLIES LIMITED - 1 left in stock

Stock# 1330844
Buyers Mounting Brackets for single-axis remote valve control both non-locking and center locking.
Compatible with B206401 / B206401001.
SUPPLIES LIMITED - 1 left in stock

Stock# 1330846
Buyers Mounting Hardware for Double, single-axis remote valve control both non-locking and center locking.
Compatible with B206401 / B206401001. Bolts are 4-1/4" Long.
SUPPLIES LIMITED - 1 left in stock

Stock# 1330847
Buyers Mounting Hardware for Triple, single-axis remote valve control both non-locking and center locking.
Compatible with B206401 / B206401001. Bolts are 5-3/4" Long.
SUPPLIES LIMITED - 1 left in stock

Stock# 1330862
Buyers Remote Valve Control Connection Kit for the Gresen S.P.,bracket required, is compatible with any Buyers B206 series controller. It has a 9/16" stroke and connects directly to valve spool.
SUPPLIES LIMITED - 1 left in stock

Stock# 1330871
Buyers Remote Valve Control Connection Kit for the Gresen V30 is compatible with any Buyers B206 series controller. It has a 9/16" stroke and connects directly to valve spool.
SUPPLIES LIMITED - 1 left in stock

Stock# 1330940
Buyers Q-Series P.T.O. Single Lever End Detent Control is designed for 1/4"-28 threaded cables. It has hardened steel gateplates with safety detents for use with all 3" travel clamp type push pull cables.This unit DOES NOT come with Console.
SUPPLIES LIMITED - 1 left in stock

Stock# 1330941
Buyers Q-Series P.T.O. Single Lever End Detent Control is designed for 5/16"-24 threaded cables. It has hardened steel gateplates with safety detents for use with all 3" travel clamp type push pull cables.This unit DOES NOT come with Console.
SUPPLIES LIMITED - 1 left in stock

Stock# 1566049
Phillips angle mount (38°) service gladhand with anodized finish for increased protection against magnesium chloride, road salts and chemicals. Service line glad hand for use on trailers only.
SUPPLIES LIMITED

Stock# 1566050
Phillips angle mount (38°) emergency gladhand with anodized finish for increased protection against magnesium chloride, road salts and chemicals. Emergency line glad hand for use on trailers only.
SUPPLIES LIMITED

Stock# 1566055
PHILLIPS angle mount (38°) service gladhand with 3/8" pipe port. Wrap-around connector plate provides additional strength. Keyed for positive connection. Service line glad hand for use on trailers only.
SUPPLIES LIMITED

Stock# 1566068
Phillips TYPE-A single wall nylon air brake tubing is heat stabilized and UV stabilized. Nylon tubing can save as much as 75% in weight over copper tubing or rubber hose.
SUPPLIES LIMITED - 1 left in stock

Stock# 1566072
Phillips TYPE-B Reinforced multi-layered nylon air brake tubing is heat stabilized and UV stabilized. Nylon tubing can save as much as 75% in weight over copper tubing or rubber hose.
SUPPLIES LIMITED -2 left in stock

Stock# 1566075
PHILLIPS brass Compression Fitting - Male Connector. For use with truck and tractor trailer nylon air brake tubing.
SUPPLIES LIMITED

Stock# 1566076
Phillips brass Compression Fitting - Male Connector. For use with truck and tractor trailer nylon air brake tubing.
SUPPLIES LIMITED

Stock# 1566087
Phillips brass Compression Fitting - Male Elbow. For use with truck and tractor trailer nylon air brake tubing.
SUPPLIES LIMITED

Stock# 1566243
PHILLIPS quick exhaust valve will speed up application of the trailer's parking brakes when installed in the supply side glad hand.
SUPPLIES LIMITED - 3 left in stock

Stock# 1566253
Phillips QWIK-FIT™ push-to-connect composite fittings reduce installation time and save up to 42% in labor costs. Each fitting has pre-sealed pipe threads and provides outstanding chemical resistance.
1/2" tube size X 1/4"- pipe thread
SUPPLIES LIMITED

Stock# 1566259
Phillips QWIK-FIT™ push-to-connect composite fittings reduce installation time and save up to 42% in labor costs. Each fitting has pre-sealed pipe threads and provides outstanding chemical resistance.
Male elbow - 3/8" tube size X 1/4" pipe thread
SUPPLIES LIMITED

Stock# 1566302
Phillips tracker bars support electrical and air cable assemblies. Kit includes 36" Stainless Steel bar, snap-on clip, sleeve, 3-hose holder and 25" spring. Cab mounting hardware not included.
SUPPLIES LIMITED

Stock# 1566327
Phillips® 3/8" x 3/8" x 3/8" quick release valve has a corrosion resistant aluminum die-cast that is used to speed up the exhaust of air from the air chambers.
SUPPLIES LIMITED

Stock# 1566432
PHILLIPS 60" extension with 1/4" quick connect swivel, coiled air brake hose assembly. Heavy-Duty air hoses are constructed with industry-standard nylon tubing. Includes standard brass ends along with extra long springs for strain relief.
SUPPLIES LIMITED - 1 left in stock

Stock# 1566436
Phillips angle mount (38°) service gladhand, bottom port, with filter screen 3/8" pipe port. Wrap-around connector plate provides additional strength. Keyed for positive connection. Service line glad hand for use on trailers only.
SUPPLIES LIMITED

Stock# 1566438
Phillips angle mount (38°) emergency gladhand, rear port, with filter screen and 3/8" pipe port. Wrap-around connector plate provides additional strength. Keyed for positive connection. Emergency glad hand for use on trailers only.
SUPPLIES LIMITED

Stock# 1566440
PHILLIPS Straight mount emergency gladhand, cast iron for durability.  Comes with a integral connector plate with spring loaded detent and 1/2" pipe port. Emergency line glad hand for use on aircoil, tractor & trailer.
SUPPLIES LIMITED

Stock# 1566441
Straight mount universal gladhand, cast iron for durability.  Comes with a integral connector plate with spring loaded detent and 1/2" pipe port. Universal line glad hand for use on aircoil, tractor & trailer.
SUPPLIES LIMITED

Stock# 1566442
Blue service glad hand seal made from polyurethane.
SUPPLIES LIMITED

Stock# 1566444
PHILLIPS black universal glad hand seal made from polyurethane.
SUPPLIES LIMITED

Stock# 1566452
PHILLIPS 20' pair (red & blue grips) of rubber air hose assemblies. Heavy-Duty air hoses are constructed with industry-standard rubber tubing. Includes swivel fitting for easy installations and spring guard for strain relief.
SUPPLIES LIMITED

Stock# 1566453
PHILLIPS 15' Rubber Air Hose with Black Universal Grip. Heavy-Duty air hoses are constructed with industry-standard nylon tubing. Includes swivel fitting for easy installations and spring guard for strain relief.
SUPPLIES LIMITED - 2 left in stock

Stock# 1566486
Phillips Coiled Air QWIK-REPAIR™ Kit is easy to install and reduces downtime due to punctured air hoses.
Kit includes: (1) QWIK-FIT Push-To-Connect Straight Union Composite Fitting with O-rings for Locking Safety, (1) QWIK-FIT Push-To- Connect Brass Male Fitting with O-rings for Locking Safety, (1) Economy Nylon Tube Cutter.
SUPPLIES LIMITED - 3 left in stock

Stock# 1566500
PHILLIPS 15' RED (emergency) coiled air brake hose assembly with extra long 40" lead. Heavy-Duty air hoses are constructed with industry-standard nylon tubing. Includes standard brass ends along with plated steel springs for cable support.
SUPPLIES LIMITED

Stock# 1566508
Phillips Heavy Duty Arctic EPDM Rubber Air Brake Hose resists cracking, kinking, weathering and provides excellent abrasion-resistance. Has an operating pressure of 145 PSI and a burst pressure of 871 PSI.  Temps from -65°F to 200°F (-53°C to 93°C)
SUPPLIES LIMITED - 2 left in stock

Stock# 1566510
PHILLIPS Heavy Duty Rubber Air Brake Hose resists cracking, kinking, weathering and provides excellent abrasion-resistance. Has an operating pressure up to 225 PSI. Temps from -40°F to +200°F (-40°C to +93°C)
SUPPLIES LIMITED - 1 left in stock

Stock# 1566517
Phillips TYPE-B Reinforced multi-layered nylon air brake tubing is heat stabilized and UV stabilized. Nylon tubing can save as much as 75% in weight over copper tubing or rubber hose. 3/8" x 250'.
SUPPLIES LIMITED - 2 left in stock

Stock# 1583020
48" x 3/8" I.D. Velvac® air brake hose assembly has one 3/8" MPT fixed end and one 3/8" MPT swivel end. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583026
32" x 1/2" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583029
44" x 1/2" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583032
60" x 1/2" I.D. Velvac® air brake hose assembly has one 3/8" MPT fixed end and one 3/8" MPT swivel end. All hoses have permanently swaged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED - 2 left in stock

Stock# 1583060
Velvac® Type-5 air tanks are water tested prior to shipping and feature an all steel construction that is rust resistant and primer sealed. Tanks are internally corrosion resistant and meet SAE J10 requirements.
SUPPLIES LIMITED

Stock# 1583065
Velvac® Type-1 air tanks are water tested prior to shipping and feature an all steel construction that is rust resistant and primer sealed. Tanks are internally corrosion resistant and meet SAE J10 requirements.
SUPPLIES LIMITED

Stock# 1583067
Velvac® Type-3 air tanks are water tested prior to shipping and feature an all steel construction that is rust resistant and primer sealed. Tanks are internally corrosion resistant and meet SAE J10 requirements.
SUPPLIES LIMITED

Stock# 1583068
Velvac® Type-16 air brake chamber has a fully threaded shaft for maximum adjustability and includes mounting hardware, clevis and cotter pin.
SUPPLIES LIMITED

Stock# 1583070
Velvac® Type-24 air brake chamber has a fully threaded shaft for maximum adjustability and includes mounting hardware, clevis and cotter pin.
SUPPLIES LIMITED

Stock# 1583071
Velvac® Type-30 air brake chamber has a fully threaded shaft for maximum adjustability and includes mounting hardware, clevis and cotter pin.
SUPPLIES LIMITED

Stock# 1583075
Velvac® Type-24 air brake diaphragm is constructed of a rubber/neoprene blend which is gas and oil resistant. All diaphragms are fabric reinforced for extra strength and long life.
SUPPLIES LIMITED

Stock# 1583082
Velvac 24" hose/cable suspender is molded of durable rubber compounds which remain flexible to -40° F and can be used with hose brackets, pogo sticks and side bars.
SUPPLIES LIMITED

Stock# 1583088
Velvac® PP-2 style air brake dash control valve is commonly used to control parking and emergency brakes.
Direct replacement for Bendix 275250, 276462
SUPPLIES LIMITED

Stock# 1583094
Velvac® Parking Brake knob and pin kit for PP-1 style dash control valves.
Replaces Bendix 248433 & Midland KN20903
SUPPLIES LIMITED

Stock# 1583095
Velvac® Universal black knob and pin kit.    Replaces Bendix 241866
SUPPLIES LIMITED

Stock# 1583096
Velvac® Pull to Park/Push to Release parking brake knob and pin kit for PP-1, PP-2 and PP-3 Style dash and control valves.
Replaces Bendix 240302
SUPPLIES LIMITED

Stock# 1583097
Velvac® Dash control valve mounting nut.    Replaces Bendix 239357
SUPPLIES LIMITED

Stock# 1583098
Velvac® TP-3 style tractor protection valve is commonly used to protect the tractor air brake system under trailer breakaway conditions.
Direct replacement for Bendix 289000 & Midland KN34060
SUPPLIES LIMITED

Stock# 1583100
Velvac® MV-3 dash control valve combines the functions of a PP-1 and a PP-7 trailer supply valve together into a single unit.
Direct replacement for Bendix 065157 & 800516
SUPPLIES LIMITED

Stock# 1583102
Velvac® R-6 style relay valve is primarily used on vehicles to apply and release rear axle(s) service or parking brakes.
Replaces Bendix 279180 & 280375
SUPPLIES LIMITED

Stock# 1583104
Velvac® R-8 style relay valve incorporates an integral double check valve with a balance port connection which provides both an anti-compounding or quick exhaust feature. Replaces Bendix 286370 & 286371
SUPPLIES LIMITED -  1 left in stock

Stock# 1583107
Velvac® R-14 style relay valve is primarily used on vehicles to apply and release rear axle(s) service or parking brakes.
Replaces Bendix 103010
SUPPLIES LIMITED

Stock# 1583116
Velvac® emergency relay valve is primarily used on vehicles to apply and release rear axle(s) service or parking brakes.
Replaces Sealco 110200
SUPPLIES LIMITED

Stock# 1583128
Velvac® RT-4 multi-function valve is primarily used on vehicles to apply and release rear axle(s) service or parking brakes.
Replaces Midland KN26000
SUPPLIES LIMITED

Stock# 1583144
Velvac® pressure protection valves are designed for convenient in-tank mounting on tanks with dual outlet ports. Primary vehicle application: Freightliner
SUPPLIES LIMITED

Stock# 1583146
Velvac® pressure protection valves are designed for convenient in-tank mounting on tanks with dual outlet ports.
Primary vehicle application: Freightliner
SUPPLIES LIMITED

Stock# 1583149
Velvac® pressure protection valves are designed for convenient in-tank mounting on tanks with dual outlet ports.
Primary vehicle application: Kenworth
SUPPLIES LIMITED

Stock# 1583151
Velvac® air pressure gauge accommodates a 1/8" FPT port and has a pressure range of 0-160 psi. Has a 1-1/2" diameter dial for easy viewing.
SUPPLIES LIMITED

Stock# 1583168
Velvac single air check valve with 1/4" thread.
Replaces Bendix 229603, 800375
SUPPLIES LIMITED

Stock# 1583170
Velvac® single air check valve with 1/2" thread.
Replaces Bendix 227717, 227788, 227871, 800372 & Midland KN23000
SUPPLIES LIMITED

Stock# 1583172
Velvac® back seating air tank drain cock with 1/4 MPT.
SUPPLIES LIMITED

Stock# 1583173
VELVAC wing handle air tank drain cock with 1/4 MPT.
SUPPLIES LIMITED

Stock# 1583174
Velvac® drain pull valve has 1/4" MPT, 120 psi maximum pressure and an attached 4' vinyl coated aircraft cable.
SUPPLIES LIMITED

Stock# 1583176
Velvac® air tank mounting brackets fit tanks up to 8-3/16" in diameter. Brackets feature an all steel construction that is rust resistant and primer sealed.
SUPPLIES LIMITED

Stock# 1583188
Velvac® 10' x 3/8" tractor to trailer airline hose assembly
SUPPLIES LIMITED

Stock# 1583189
Velvac® 12' x 3/8" tractor to trailer airline hose assembly
SUPPLIES LIMITED

Stock# 1583191
Velvac® neoprene-sealed single pole On/Off toggle switch is rated for 21 amps at 14 VDC and is moisture and dust resistant.
SUPPLIES LIMITED

Stock# 1583196
Velvac® PTO Four-Way Control Valve Assembly is panel mounted and replaces Chelsea 328865X. Features include 1/8 inch - 27 NPTF, 150 psi maximum operating pressure and an operating temperature range from -20° to +200°F.
SUPPLIES LIMITED

Stock# 1583207
Velvac® Cab Leveling Height Control Valves fit Peterbuilt and International cabs, have 1/4" NPT ports and replaces WABCO S464 007 004-0 and Barksdale KD2355 valves.
SUPPLIES LIMITED

Stock# 1583212
Velvac® Integral Dump Leveling Valve fits International and Peterbuilt Chassis w/ Dump, has 1/4" NPT ports and replaces International 2506169C91, Hadley HAD500NS, Barksdale KD2360.
SUPPLIES LIMITED

Stock# 1583213
Velvac® Integral Dump Leveling Valve fits Kenworth Chassis w/ dump and Volvo Chassis, has 1/4" NPT ports and replaces Haldex PR 90554950, 90554945, Barksdale KD2374.
SUPPLIES LIMITED

Stock# 1583214
Velvac® Height Control Air Accessory Valve, has 1/4" NPT ports and replaces Midland/Haldex & Neway 9055427.
SUPPLIES LIMITED

Stock# 1583216
Velvac® Height Control Valves comes with fitting package and has 1/8” NPT. Replaces: Neway 90054007
SUPPLIES LIMITED

Stock# 1583218
Velvac® Air dryer replacement cartridge fits AD-SP type air dryers. Includes seal rings. Replaces: Bendix 109994, Bosch l-487-434-901 & WABCO 432-410-020-2, 432-420-220-2 (also fits System Saver 1200).
SUPPLIES LIMITED

Stock# 1583219
24" x 3/8" I.D. Velvac® air brake hose assembly has two 3/8" MPT swivel ends. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583221
28" x 1/2" I.D. Velvac® air brake hose assembly has two 3/8" MPT swivel ends. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583222
32" x 1/2" I.D. Velvac® air brake hose assembly has two 3/8" MPT swivel ends. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583223
42" x 1/2" I.D. Velvac® air brake hose assembly has two 3/8" MPT swivel ends. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583226
72" x 1/2" I.D. Velvac® air brake hose assembly has two 3/8" MPT swivel ends. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583234
VELVAC Type-12 air brake chamber has a fully threaded shaft for maximum adjustability and includes mounting hardware, clevis and cotter pin.
SUPPLIES LIMITED