Closeout Tractor Trailer Parts and Accessories

Stock# 1583235
Velvac® 15' x 3/8" tractor to trailer airline hose assembly
SUPPLIES LIMITED

Stock# 1583236
Velvac® 20' x 3/8" tractor to trailer airline hose assembly
SUPPLIES LIMITED

Stock# 1583240
VELVAC four position valve operates systems where full air or vacuum pressure must be isolated and has a newly designed orifice area that increases airflow 30 - 40% in comparison to previous valves.
SUPPLIES LIMITED

Stock# 1583247
Velvac® 1/8" NPT cone filters prevent dirt from entering exhaust ports. Sold as each.
SUPPLIES LIMITED

Stock# 1583248
Velvac® 1/4" NPT cone filters prevent dirt from entering exhaust ports. Sold as each.
SUPPLIES LIMITED

Stock# 1583253
Velvac® Four-way 3-position valve with center exhaust filter for use with single or double acting air filters.
SUPPLIES LIMITED

Stock# 1583255
VELVAC Four-way solenoid spring return valve with internal pilot assist for use with lift axles or suspension systems.
SUPPLIES LIMITED

Stock# 1583267
Velvac® Power take-off control kits are used for add-on air-controlled accessories.
SUPPLIES LIMITED - 1 left in stock

Stock# 1583268
Velvac® Power take-off air shift valve assemblies are used for add-on air-controlled accessories. Kit includes control valve only.
SUPPLIES LIMITED

Stock# 1583272
Velvac® Transmission Range Valve A-6918 with 1/16" NPT Ports and a Gray switch.
SUPPLIES LIMITED

Stock# 1583276
Shear-Seal® Height Control Valve / Linkage (12.8 in. -19.0 in.) is primarily used on vehicles with air systems.
SUPPLIES LIMITED

Stock# 1583277
Velvac® Height Control Valve Kit is primarily used on vehicles with air suspension systems. Port size 1/8 in. NPT Replaces: Hadley H600
SUPPLIES LIMITED

Stock# 1583281
Velvac® Height and Lumbar Control Seat Valve is primarily used on vehicles with air suspension seat systems. Has (2) 3/16 in barb ports on the end. Paddle Type.
Primary Vehicle Application: Bostrom
SUPPLIES LIMITED

Stock# 1583284
Velvac® ST-4 Pressure Release Safety Valve is primarily used on vehicles with air suspension or air brake systems. Automatic pressure release at 175 Psi.
SUPPLIES LIMITED

Stock# 1583294
Integrated shut-off valve, designed for double trailers. Color coded connector plate for easy identification. Standard with rubber seal, Includes bulk head fitting. Meets SAE J318 specifications.
SUPPLIES LIMITED

Stock# 1583295
Integrated shut-off valve, designed for double trailers. Color coded connector plate for easy identification. Standard with rubber seal, Includes bulk head fitting. Meets SAE J318 specifications.
SUPPLIES LIMITED

Stock# 1583305
Velvac pogo stick designed for use with heavier ABS cables. Extra heavy-duty internal spring. Heavy-duty 7/16" aircraft-quality mounting bolt. 8" coated spring for corrosion resistance.
SUPPLIES LIMITED

Stock# 1583307
Velvac 40" Zinc Pogo Stick with Snubber chain assembly that helps prevent the pogo stick from coming in contact with cab. Durable, zinc-plated steel bodies provide excellent support for air, vacuum and electrical lines. Heavy-duty, polyester-coated, oil tempered steel springs can withstand 90° from vertical bends.
SUPPLIES LIMITED

Stock# 1583308
VELVAC 40" Zinc Pogo Stick with Snubber chain assembly that helps prevent the pogo stick from coming in contact with cab. Durable, zinc-plated steel bodies provide excellent support for air, vacuum and electrical lines. Heavy-duty, polyester-coated, oil tempered steel springs can withstand 90° from vertical bends. Kit comes with QTY: (2) Gladhand Holders.
SUPPLIES LIMITED

Stock# 1583315
22" x 3/8" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583316
26" x 3/8" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583317
30" x 3/8" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583319
38" x 3/8" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583321
46" x 3/8" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583322
54" x 3/8" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583324
30" x 3/8" I.D. Velvac® air brake hose assembly has 3/8" MPT swivel ends. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583327
VELVAC 26" x 1/2" I.D. air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583328
30" x 1/2" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583329
34" x 1/2" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583330
42" x 1/2" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583331
46" x 1/2" I.D. Velvac® air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583332
VELVAC 84" x 1/2" I.D. air brake hose assembly has 3/8" MPT ends, one swivel and one fixed. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583333
22" x 1/2" I.D. Velvac® air brake hose assembly has 3/8" MPT swivel ends. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583334
26" x 1/2" I.D. Velvac® air brake hose assembly has 3/8" MPT swivel ends. All hoses have permanently swagged fittings and meet SAE J1402 requirements.
SUPPLIES LIMITED

Stock# 1583336
100' x 1/8" O.D. Velvac® black nylon tubing meets SAE J844 and FMVSS 106 requirements and is intended for brake systems only - not for fuel line applications.
SUPPLIES LIMITED

Stock# 1583340
100' x 1/2" O.D. Velvac® black nylon tubing meets SAE J844 and FMVSS 106 requirements and is intended for brake systems only - not for fuel line applications.
SUPPLIES LIMITED

Stock# 1583341
100' x 5/8" O.D. Velvac® black nylon tubing meets SAE J844 and FMVSS 106 requirements and is intended for brake systems only - not for fuel line applications.
SUPPLIES LIMITED

Stock# 1583342
100' x 5/8" O.D. Velvac® black nylon tubing meets SAE J844 and FMVSS 106 requirements and is intended for brake systems only - not for fuel line applications.
SUPPLIES LIMITED

Stock# 1583344
500' x 3/8" O.D. Velvac® black nylon tubing meets SAE J844 and FMVSS 106 requirements and is intended for brake systems only - not for fuel line applications.
SUPPLIES LIMITED

Stock# 1620009
LELAND Repair Kit #K260 is a direct replacement for the following applications:
Rockwell "T" Series 15" Steering Axle Brake, Types 1 and 2
SUPPLIES LIMITED

Stock# 1620023
LELAND Utility Grade Air Repair Kit #1308E is a direct replacement for the following applications: Eaton 15" x 4" EB & ES Front Brakes
SUPPLIES LIMITED

Stock# 1620024
LELAND Utility Grade Repair Kit #1308Q is a direct replacement for the following applications: Minor Repair Kit for Rockwell "Q" Series 15" x 4" Single Web Steering Axle Brake
SUPPLIES LIMITED

Stock# 1620043
LELAND Repair Kit #K88 is a direct replacement for the following applications:
Fruehauf Pro-Par 16-1/2" Brakes using Spherical Cam Support Bushing
SUPPLIES LIMITED

Stock# 1620047
LELAND Repair Kit #K348 is a direct replacement for the following applications:
Dana Late 16-1/2" Brakes using Bronze Spider Bushing. Services 10 or 28 Spline, 1-1/2" Cam, Standard, "XL" and "Hi-Rise", Ingersoll 16-1/2" Brakes using Nylon Spider Bushing. Services 10 or 28 Spline and Standard Forge Brakes using Bronze Spider Bushing. Services 10 or 28 Spline, 1-1/2" Cam, Standard and "XL" Types
SUPPLIES LIMITED

Stock# 1620064
LELAND R.H Air Brake Camshaft Kit #L1298 is a direct replacement for the following applications: Rockwell 4000-6000 "R" Series 16-1/2" Trailer Axle Brakes 1-5/8", 1-1/2" - 28 Spline
SUPPLIES LIMITED

Stock# 1620065
LELAND L.H Air Brake Camshaft Kit #L1299 is a direct replacement for the following applications: Rockwell 4000-6000 "R" Series 16-1/2" Trailer Axle Brakes 1-5/8", 1-1/2" - 28 Spline
SUPPLIES LIMITED

Stock# 1620070
LELAND L.H Air Brake Camshaft Kit #L3045 is a direct replacement for the following applications: Dana Axles Built thru 08/95 with 16-1/2" "Fast Change" 4515 or "Xtralife" 4701/4707 Brakes 1-1/2" - 28 Spline, 1-1/2" Bearing Surfaces, Revised S-Head
SUPPLIES LIMITED

Stock# 1620072
LELAND L.H Air Brake Camshaft Kit #L3099 is a direct replacement for the following applications: Rockwell "Q-Plus" Drive and Steer Axles 1-1/2" - 28 Spline
SUPPLIES LIMITED

Stock# 1620073
LELAND R.H Air Brake Camshaft Kit #L3112 is a direct replacement for the following applications: Rockwell "Q-Plus" Drive and Standard 16-1/2" Trailer Axle Brakes 1-5/8", 1-1/2" - 28 Spline
SUPPLIES LIMITED

Stock# 1620074
LELAND L.H Air Brake Camshaft Kit #L3113 is a direct replacement for the following applications: Rockwell "Q-Plus" Drive and Standard 16-1/2" Trailer Axle Brakes 1-5/8", 1-1/2" - 28 Spline
SUPPLIES LIMITED

Stock# 1620075
LELAND R.H Air Brake Camshaft Kit #L3116 is a direct replacement for the following applications: Rockwell "Q-Plus" Drive and Standard 16-1/2" Trailer Axle Brakes 1-5/8", 1-1/2" - 28 Spline
SUPPLIES LIMITED

Stock# 1620076
LELAND L.H Air Brake Camshaft Kit #L3117 is a direct replacement for the following applications: Rockwell "Q-Plus" Drive and Standard 16-1/2" Trailer Axle Brakes 1-5/8", 1-1/2" - 28 Spline
SUPPLIES LIMITED

Stock# 1620077
LELAND R.H Air Brake Camshaft Kit #L3288 is a direct replacement for the following applications: Dana Trailer Axles Built thru 09/95 with 16-1/2" "Fast Change" 4515, "Xtralife" 4707 or 18" Brakes 1-1/2" - 28 Spline, 1-5/8" & 1-1/2" Bearing Surfaces, Revised S-Head
SUPPLIES LIMITED

Stock# 1620078
LELAND L.H Air Brake Camshaft Kit #L3289 is a direct replacement for the following applications: Dana Trailer Axles Built thru 09/95 with 16-1/2" "Fast Change" 4515, "Xtralife" 4707 or 18" Brakes 1-1/2" - 28 Spline, 1-5/8" & 1-1/2" Bearing Surfaces, Revised S-Head
SUPPLIES LIMITED

Stock# 1620079
LELAND R.H Air Brake Camshaft Kit #L3320 is a direct replacement for the following applications: Dana Trailer Axles Built thru 09/95 with 16-1/2" "Fast Change" 4515, "Xtralife" 4707 or 18" Brakes 1-1/2" - 28 Spline, 1-5/8" & 1-1/2" Bearing Surfaces, Revised S-Head
SUPPLIES LIMITED

Stock# 1620080
LELAND L.H Air Brake Camshaft Kit #L3321 is a direct replacement for the following applications: Dana Trailer Axles Built thru 09/95 with 16-1/2" "Fast Change" 4515, "Xtralife" 4707 or 18" Brakes 1-1/2" - 28 Spline, 1-5/8" & 1-1/2" Bearing Surfaces, Revised S-Head
SUPPLIES LIMITED

Stock# 5331079
For one Dexter 16-1/2" x 7" air brake assembly. Includes (4) blocks, (48) rivets and installation instructions.
SUPPLIES LIMITED

Stock# 5349011
UNI-BOND Repair Kit #HK1308Q is a direct replacement for the following applications: Meritor 15" x 4" front brake
SUPPLIES LIMITED

Stock# 5351034
The SAF Holland landing gear strut brace has a 23" overall length, 1.90" outside diameter and measures 21" center of mounting hole to center of mounting hole.
SUPPLIES LIMITED -  (1) REMAINING IN STOCK

Stock# 5351037
Crank handle hanger used on SAF HOLLAND Landing Gear Sets. Hanger measures 10-1/4" in length. Sold as each.
SUPPLIES LIMITED

Stock# 5351061
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson S-11650, Hendrickson S-2064, Hutchens H-9424-01, Hutchens 9424-03, Navistar/Fleetrite 554766C1, Raydan 211-00-010, Ridewell 1013589039C, Watson & Chalin AS-001, Triangle 8311, Goodyear 1R12-095, Firestone W01-358-9039 and Contitech 9 10-10 P 311
SUPPLIES LIMITED

Stock# 5351062
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Binkley XB-SPN-053-37, SAF-HOLLAND 90557173, SAF-HOLLAND 9055722, Triangle 8484, Goodyear 1R12-508, Firestone W01-358-8204 and Contitech 9 10-12 P 484
SUPPLIES LIMITED

Stock# 5351063
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: SAF-HOLLAND 9055716, SAF-HOLLAND 9055722, SAF-HOLLAND 9055721, Watson & Chalin AS-005, Triangle 8488, Goodyear 1R12-487, Firestone W01-358-9366 and Contitech 9 10-12 P 488.
SUPPLIES LIMITED

Stock# 5351064
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson S-20223,Loadguard SC2758, Triangle 8427, Goodyear 1R12-367, Firestone W01-358-9640 and Contitech 9 10-12 A 427.
SUPPLIES LIMITED

Stock# 5351065
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson S-20010, Hendrickson S-25559, Volvo 85101147, Watson & Chalin AS-0084, Triangle 8433, Goodyear 1R13-119, Firestone W01-358-9270 and Contitech.
SUPPLIES LIMITED

Stock# 5351067
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson S-2066, Hendrickson S-4041, Hendrickson S-11651, Hendrickson S-13159, Hendrickson B-12514-007, Hutchens H-9630-01, Ridewell 1003589082C, Watson & Chalin AS-0011, Triangle 8310, Goodyear 1R12-092, Firestone W01-358-9082 and Contitech 9 10-16 P 310.
SUPPLIES LIMITED

Stock# 5351069
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: SAF-HOLLAND 90557117, Watson & Chalin AS-0090, Triangle 8443, Goodyear 1R12-502, Firestone W01-358-9921 and Contitech 9 10-17.5 P 443.
SUPPLIES LIMITED

Stock# 5351070
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: SAF-HOLLAND 90557157, SAF-HOLLAND 90557301, Triangle 8548, Goodyear 1R12-532, Firestone W01-358-9935 and Contitech 9 10-17.5 P 548.
SUPPLIES LIMITED

Stock# 5351071
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson C20413, Hendrickson S-20124, Loadguard SC2759, Volvo 85101155, Triangle 8435, Goodyear 1R12-375, Firestone W01-358-9265, and Contitech 9 10-19 P 435.
SUPPLIES LIMITED

Stock# 5351072
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Fruehauf UCD-9393-2. Suspensions, Inc. 20004, Triangle 8383, Goodyear 1R12-279, Firestone W01-358-9394, Contitech 9 10-19 P 383
SUPPLIES LIMITED

Stock# 5351073
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson S-22045, Hendrickson S-21623, Triangle 8522, Goodyear 1R13-124, Firestone W01-358-8755, Contitech 10 10-15 S 522.
SUPPLIES LIMITED

Stock# 5351074
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson S-21966, Triangle 8526, Goodyear 1R13-177, Firestone W01-358-8708 and Contitech 10 10-16 S 526.
SUPPLIES LIMITED

Stock# 5351075
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson S-20127, Loadguard SC276, Triangle 8434, Goodyear 1R13-118, Firestone W01-358-9580 and Contitech 10 10-21 S 434
SUPPLIES LIMITED

Stock# 5351077
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Hendrickson S-20900, Hendrickson S-21800, Triangle 8460, Goodyear 1R13-159, Firestone, W01-358-8709 and Contitech 10 10.5-15 P 460.
SUPPLIES LIMITED

Stock# 5351078
GOLD LINE™ Rolling Lobe Type Air Springs consist of the rubber bellows, bead plate, piston, and an optional internal bumper. Rolling lobe air springs provide the maximum ride comfort and therefore are the most popular air spring designs for commercial vehicle suspensions. Replaces the following OEM Part Numbers: Dayton 352-8050, Hendrickson S-4771, Hendrickson B-12514-013, Loadguard SC2052, Navistar/Fleetrite 1685174C1, Reyco 23631-01, Watson & Chalin AS-003, Triangle 8320, Goodyear 1R14-039, Firestone W01-358-8050 and Contitech.
SUPPLIES LIMITED

Stock# 5351081
GOLD LINE™ Convoluted type air springs consist of the rubber bellows, top and bottom bead plate, and an optional internal bumper. Convoluted air springs are used in both vehicular suspensions and industrial applications. In industrial applications, they are used as air actuators or vibration isolators. Replaces the following OEM Part Numbers: Binkley XB-SPN-053-37, Cush C0073, Histeer 10315, Reyco 18813-01, Reyco 20018-01, Triangle 4480, Goodyear 2B12-440, Firestone W01-358-7555  and Contitech FD 331-26 480.
SUPPLIES LIMITED

Stock# 5445008
This set allows for relocation of standard horizontal mount brackets from one vehicle to another. Kit includes two mounting sockets and all necessary hardware.
SUPPLIES LIMITED

Stock# 5445009
This zinc hardware kit is used to attach mud flaps to any type of mud flap brackets.Kit includes: eight bolts (5/16″ x 1.25"), eight nuts (5/16″) and sixteen washers (5/16″), enough for one pair of mud flaps.
SUPPLIES LIMITED

Stock# 5445026
Corner protectors are designed to protect both strap and cargo from damage caused by the load. The 12″ Corner Protector comes with 2 ribs and 1 center slot and can be used with straps up to 4" wide.
SUPPLIES LIMITED

Stock# 5445027
Corner protectors are designed to protect both strap and cargo from damage caused by the load. The 24″ Corner Protector comes with 4 ribs and 1 center slot and can be used with straps up to 4" wide.
SUPPLIES LIMITED -2 left in stock

Stock# 5445028
Corner protectors are designed to protect both strap and cargo from damage caused by the load. The 36″ Corner Protector comes with 6 ribs and 1 center slot and can be used with straps up to 4" wide.
SUPPLIES LIMITED - 2 left in stock

Stock# 5445029
Corner protectors are designed to protect both strap and cargo from damage caused by the load. The 48″ Corner Protector comes with 8 ribs and 2 center slot and can be used with straps up to 4" wide.
SUPPLIES LIMITED - 2 left in stock

Stock# 5445032
Fleet Engineers 90 degree forged steel corner iron helps “square up” the trailer.
Measures 12″ x 12″ x 1-1/4″ wide. Sold as each.
SUPPLIES LIMITED - 2 left in stock

Stock# 5445039
Spray suppression skirting allows air to flow freely through the flexible filament and reduces spray to keep vehicles cleaner. Significant spray reduction improves both driver and motorist visibility. 8 ft. spray suppression brush (6 in.) only. Sold as each.
SUPPLIES LIMITED

Stock# 5445042
The Fleet Engineers Mudflap Mounting Angles are constructed with .12" thick steel with a RoadKote® finish. They can be used to attach mud flaps to fenders and they prevent tear out of mud flap holes. Sold in pairs.
SUPPLIES LIMITED - 1 left in stock

Stock# 5445043
The Fleet Engineers Mudflap Retaining Straps are constructed with .12" thick steel with a RoadKote® finish. They can be used to attach mud flaps to fenders and they prevent tear out of mud flap holes. Sold in pairs. Dimensions: 24" x 2"
SUPPLIES LIMITED - 1 left in stock

Stock# 5445047
Stainless Steel Mudflap Plate keep mudflaps/splash guards from blowing or curling. This was designed for mudflaps 24" wide and features square punched mounting holes. No hardware included. 1 lower plate per kit.
SUPPLIES LIMITED

Stock# 5445049
FLEET ENGINEERS One-Piece Weld-On Hinge Butts feature a plain steel construction and is intended for custom hinge applications.
SUPPLIES LIMITED

Stock# 5445070
The Strick Style Three Hole Hinge by Fleet Engineers measures 6.75" x 3.00" and replaces Strick Part # AA35F00100100.
SUPPLIES LIMITED

Stock# 5445091
FLEET ENGINEERS 96" shaft for single spring operator assemblies is constructed of 1.00″ o.d. heavy-duty steel tubing.
SUPPLIES LIMITED - 3 left in stock

Stock# 5445092
FLEET ENGINEERS 89.5" shaft for single spring operator assemblies is constructed of 1.00″ o.d. heavy-duty steel tubing.
SUPPLIES LIMITED - 2 left in stock

Stock# 5445099
Features a zinc plated finish 1.00″ bearing with operator bracket flange. Factory installation assures proper bearing alignment
SUPPLIES LIMITED

Stock# 5445105
FLEET ENGINEERS spring spacer for dual spring operator assemblies features extruded PVC construction with zinc plated thrust washer. Measures 33"
SUPPLIES LIMITED

Stock# 5445106
The Fleet Engineers spring spacer for dual spring operator assemblies features extruded PVC construction with zinc plated thrust washer. Measures 35"
SUPPLIES LIMITED - 2 left in stock

Stock# 5445107
FLEET ENGINEERS shaft is constructed of 1" outside diameter heavy-duty steel tubing. Holes are drilled in one end only for cotter pins, with other end not drilled for flexibility. Measures 87"
SUPPLIES LIMITED - 2 left in stock

Stock# 5445108
Fleet Engineers shaft is constructed of 1″ outside diameter heavy-duty steel tubing. Holes are drilled in one end only for cotter pins, with other end not drilled for flexibility. Measures 93"
SUPPLIES LIMITED - 1 left in stock

Stock# 5445109
FLEET ENGINEERS dual overhead door spring shaft is constructed of 1" outside diameter heavy-duty steel tubing. Holes are drilled in one end only for cotter pins, with other end not drilled for flexibility. Measures 96"
SUPPLIES LIMITED - 2 left in stock

Stock# 5445118
Durable 2.00″ wide x 15.50" long pull strap with black nylon construction for added strength and durability. Rivets and retainer have a zinc finish.
SUPPLIES LIMITED

Stock# 5445119
Durable 2.00″ wide x 29.50" long pull strap with black nylon construction for added strength and durability. Rivets and retainer have a zinc finish.
SUPPLIES LIMITED

Stock# 5445121
FLEET ENGINEERS RoadKote finished heavy-duty cable anchor bracket allows proper rotation of the cable head on flush mount 2″ roller doors.
SUPPLIES LIMITED