TIEDOWN 10" Vented Cap Style GalvX Disc Brake Kit w/ Vortex Hub #82061

Tie Down Engineering 10" (5-Lug) 'Cap Style' GALVX Coated Vented Disc Brake kit with Vortex Hub. Replaces 10" Drum Brakes, mounts to 4-hole axle brake flange. Includes GALVX finish Vented slip on rotor, GALVX mounting brackets w/hardware, aluminum caliper assembly with SS slider pins, GALVX Vortex Hub, and complete installation instructions.

Advantages:
* E-Coat finish protects the aluminum caliper from salt crystallization.
* Stainless Steel caliper slide pins are easily accessible with 7/16” hex heads for quick removal
* Stainless Steel coated brake pad backing plates further reduce areas susceptible to corrosion
* All aluminum caliper, 380 series alloy, sheds heat five times faster than traditional cast iron calipers
* Compact design allows short axle overhangs and provides direct brake line routing back to the axle
* Oil impregnated bronze bushings last longer and slide smoother
* Oversize rubber boot is 50% thicker by design and provides a more positive piston withdrawal

Vortex hubs are a "no touch" pre-greased lubrication system with Extra Heavy Duty Lucas grease that requires no maintenance for up to 100,000 miles or 6 years. An external zerk fitting is placed in the back of the hub and allows for maximum flushing of the old grease while replacing the hub with new grease. Meets or exceeds OEM "Lube for Life" requirements.

ROTOR DIAMETER: 10"
REPLACES DRUM DIAMETER: 10"
# OF STUDS: 5
BOLT CIRCLE: 4-1/2" (14" & Larger Wheels)
AXLE RATING: 3,750 lbs. (1,875 per assembly)
BEARING SIZE: 1-3/8" x 1-1/16"
NOTE: TIEDOWN DISC BRAKES ARE NOT DESIGNED TO BE USED WITH ELECTRIC-OVER-HYDRAULIC BRAKE ACTUATORS THAT PRODUCE MORE THAN 1,200 PSI
• YOU WILL NEED 2 OF THESE KITS PER AXLE FOR A COMPLETE INSTALL