TIEDOWN 10" Vented Cap Style GalvX Disc Brake Kit #86856

Tie Down Engineering 10" (5-Lug) 'Cap Style' GALVX Coated Vented Disc Brake kit. Replaces 10" Drum Brakes, mounts to 4-hole axle brake flange. Includes GALVX finish Vented slip on rotor, GalvX mounting brackets w/hardware, aluminum caliper assembly with SS slider pins and complete installation instructions. 5-Lug hub kit NOT included.

Advantages:
* E-Coat finish protects the aluminum caliper from salt crystallization.
* Stainless Steel caliper slide pins are easily accessible with 7/16” hex heads for quick removal
* Stainless Steel coated brake pad backing plates further reduce areas susceptible to corrosion
* All aluminum caliper, 380 series alloy, sheds heat five times faster than traditional cast iron calipers
* Compact design allows short axle overhangs and provides direct brake line routing back to the axle
* Oil impregnated bronze bushings last longer and slide smoother
* Oversize rubber boot is 50% thicker by design and provides a more positive piston withdrawal
Always use High-Temp. Marine Bearing Grease with disc brakes due to the higher operating temperatures as compared to drum brakes.

ROTOR DIAMETER: 10"
REPLACES DRUM DIAMETER: 10"
# OF STUDS: 5 (Hub not included)
BOLT CIRCLE: 4-1/2" (14" & Larger Wheels)
AXLE RATING: 3,750 lbs. (1,875 per assembly)

NOTE: TIEDOWN DISC BRAKES ARE NOT DESIGNED TO BE USED WITH ELECTRIC-OVER-HYDRAULIC BRAKE ACTUATORS THAT PRODUCE MORE THAN 1,200 PSI
• YOU WILL NEED 2 OF THESE KITS PER AXLE FOR A COMPLETE INSTALL